IE interfaces (산업공학)

Korean Institute of Industrial Engineers (대한산업공학회)
권호 표지
DOI QR코드

DOI QR Code

On Reliability Performance of Safety Instrumented Systems with Common Cause Failures in IEC 61508 Standard

공통원인고장을 고려한 안전제어시스템의 신뢰성 평가척도에 관한 고찰 : IEC 61508을 중심으로

  • Seo, Sun-Keun (Department of Industrial and Management Systems Engineering, Dong-A University)
  • 서순근 (동아대학교 산업경영공학과)
  • Received : 2012.07.27
  • Accepted : 2012.09.11
  • Published : 2012.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The reliability performance measures for low and high or continuous demand modes of operation of safety instrumented systems(SISs) are examined and compared by analyzing the official definitions in IEC 61508 standard. This paper also presents a status of common cause factor(CCF) models used in IEC 61508 and problems relating CCF modelling are discussed and ideas to solve these ones are suggested. An example with mixed M-out-of-N architecture is carried out to illustrate the proposed methods.

Keywords

References

  1. Atwood C. L. (1986), The Binomial Failure Rate Common Cause Model, Technometrics, 28, 139-48. https://doi.org/10.1080/00401706.1986.10488115
  2. Bukowski, J. V. (2008), A Unified Model for Evaluating the Safety Integrity Level of Safety Instrumented Systems, 2008 Proceedings of the Annual Reliability and Maintainability Symposium, 137-142.
  3. Hauge, S., Häbrekke, S., and Lundteigen, M. A. (2010a), Reliability Prediction Method for Safety Instrumented Systems-PDS Example Collection, SINTEF, A-17956, Trondheim(Norway).
  4. Hauge, S., Hokstad, P., Langseth, H., and Oien, K. (2006), Reliability Prediction Method for Safety Instrumented Systems-PDS Method Handbook, SINTEF, A- 06031, Trondheim(Norway).
  5. Hauge, S., Lundteigen, M. A., Hokstad, P., and Habrekke, S. (2010b), Reliability Prediction Method for Safety Instrumented Systems-PDS Method Handbook, SINTEF, A-13503, Trondheim(Norway).
  6. Hoepfer, V. M., Saleh, J. H., and Marais, K. B. (2009), On the Value of Redundancy Subject to Common-Cause Failures: Toward the Resolution of an On- Going Debate, Reliability Engineering and System Safety, 94, 1904-1916. https://doi.org/10.1016/j.ress.2009.06.007
  7. Hokstad, P. and Corneliussen, K. (2004), Loss of Safety Assessment and the IEC 61508 Standard, Reliability Engineering and System Safety, 83, 111-120. https://doi.org/10.1016/j.ress.2003.09.017
  8. Hokstad, P., Maria, A., and Tomis, P. (2006), Estimation of Common Cause Factors from Systems with Different Numbers of Channels, IEEE Transactions on Reliability, 55, 18-25. https://doi.org/10.1109/TR.2005.858095
  9. IEC 61508 (2000), Functional Safety of Electrical/Electronic/Programmable Electronic (E/E/PE) Safety Related Systems, 1.0 ed., Part 1-7, IEC, Switzerland.
  10. IEC 61508(2010), Functional Safety of Electrical/Electronic/Programmable Electronic (E/E/PE) Safety Related Systems, 2.0 ed., Part 1-7, IEC, Switzerland.
  11. IEC 61511(2003), IEC 61511 Standard. Functional safety-Safety Instrumented Systems for the Process Industry Sector, Part 1-3, IEC, Switzerland.
  12. Innal, F., Dutuit, Y., Rauzy, A., and Signoret, J. P. (2010), New Insight into the Average Probability of Failure on Demand and the Probability of Dangerous Failure per Hour of Safety Instrumented Systems, Proc. IMechE Part O : J. Risk and Reliability, 224, 75-86.
  13. ISA-TR84.00.02 (2002), Safety Instrumented Functions (SIF)-Safety Integrity Levels (SIL) Evaluation Techniques, Part 1-5, The Instrumentation, Systems, and Automation Society, USA.
  14. ISO 26262 (2011), Road Vehicles-Functional Safety, Part 1-9, ISO, Switzerland.
  15. Jin, H., Lundteigen, M. A., and Rausand, M. (2011), Reliability Performance of Safety Instrumented Systems: A Common Approach for Both Low-and High- Demand Mode of Operation, Reliability Engineering and System Safety, 96, 365-373. https://doi.org/10.1016/j.ress.2010.11.007
  16. Lilleheier, T. (2008), Analysis of Common Cause Failures in Complex Safety Instrumented Systems, Master thesis, NTNU, Norway.
  17. Mosleh, A., Fleming, K. N. Parry, G. W., Paula, H. M., Worledge, D. H., and Rasmuson, D. M. (1988), Procedures for Treating Common Cause Failures in Safety and Reliability Studies, NUREG/CR-4780, US NRC and EPI, USA, 1/2.
  18. Mosleh, A., Rasmuson, D. M. and Marshall, F. M. (1998), Guidelines on Modeling Common-Cause Failures in Probabilistic Risk Assessment, NUREG/CR-5485, US NRC, USA.
  19. Oliveira, L. F. and Abramovitch, R. N. (2010), Extension of ISA TR84.00.02 PFD Equations to KooN Architectures, Reliability Engineering and System Safety, 95, 707-715. https://doi.org/10.1016/j.ress.2010.01.006
  20. Rausand, M. and Høyland, A. (2004), System Reliability: Models, Statistical Methods and Applications, 2nd ed., Wiley, New Jersey(USA).
  21. Zhang, T., Long, W., and Sato, Y. (2003), Availability of Systems with Self- Diagnostic Components-Applying Markov Model to IEC 61508-6, Reliability Engineering and System Safety, 80, 133-141. https://doi.org/10.1016/S0951-8320(03)00004-8