연구 과제 주관 기관 : 부산대학교
- Ho, K. I. and Chang, Y. S., "A Study on the Sheet Bending by the Plastic Deformation of Flange," Trans. of KSME A, Vol. 21, No. 7, pp. 1050-1057, 1997.
- Lee, S. Q. and Yang, D. Y., "An Assessment Numerical Parameters Influencing Springback in Explicit Finite Element Analysis of Sheet Metal Forming Process," J. Mater. Process. Technol., Vol. 80-81, pp. 60-67, 1998. https://doi.org/10.1016/S0924-0136(98)00177-0
- Chandra, A., "Real-time Identification and Control of Springback in Sheet Metal Forming," ASME J. of Eng. for Industry, Vol. 109, pp. 265-273, 1987. https://doi.org/10.1115/1.3187128
- Won, S. T. and Lim, K. H., "A Study on the Mechanical Properties and Bending Formability Evaluation of the Spring Strip Materials," Trans. of Mater. Proc., Vol. 15, No. 9, pp. 660-666, 2006.
- Gupta, S. K. and Rajagopal, D., "Sheet Metal Bending: Forming Part Families for Generating Shared Press-Brake Setups," J. of Manuf. Syst., Vol. 21, pp. 329-350, 2002. https://doi.org/10.1016/S0278-6125(02)80033-4
- Han, S. S., "Influence of Frictional Behavior Depending on Contact Pressure on Springback at U Draw Bending," Trans. of Mater. Proc., Vol. 20, No. 5, pp. 344-349, 2011. https://doi.org/10.5228/KSTP.2011.20.5.344
- Kwon, Y., "A Closed Form Nonlinear Solution for Large Pure Bending Deformation of Solid Plate," J. of the KSPE, Vol. 15, No. 12, pp. 220-225, 1998.
- Kim, B. G., Lee, I. S., and Keum, Y. T., "Study on the Springback Reduction of Automotive Advanced High Strength Steel Panel," Trans. of Mater. Proc., Vol. 18, No. 6, pp. 488-493, 2009. https://doi.org/10.5228/KSPP.2009.18.6.488
- Lee, S. B., Kim, D. H., and Kim, B. M., "Hemming Process Design of the Permalloy Shielding Can for the Stiffness and Shape Accuracy," J. of the KSPE, Vol. 19, No. 5, pp. 29-35, 2002.
- Kim, H. J., Choi, W. M., Lim, J. K., Park, C. D., Lee, W. H., and Kim, H. Y., "A Parametric Study of the Hemming Process by Finite Element Analysis," Trans. of KSME A, Vol. 28, No. 2, pp. 149-157, 2004. https://doi.org/10.3795/KSME-A.2004.28.2.149
- Johnson, W. and Mellor, P. B., "Engineering Plasticity," Ellis Horwood, 1983.
- Numerical Evaluation of Hemming Defects Found on Automotive Door Panels vol.24, pp.4, 2015, https://doi.org/10.5228/KSTP.24.4.280