Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지
DOI QR코드

DOI QR Code

Numerical Study on Evaluation of Design Parameters of Intermediate Shaft in Steering System

조향장치용 인텀 샤프트 설계변수 평가를 위한 수치적 연구

  • Kang, Young Su (Department of Aerospace Engineering, Pusan National Univ.) ;
  • Doo, Min Soo (R&D Center, Taelim Industrial Co., Ltd.) ;
  • Kim, Jeong (Department of Aerospace Engineering, Pusan National Univ.) ;
  • Kang, Beom Soo (Department of Aerospace Engineering, Pusan National Univ.) ;
  • Song, Woo Jin (Industrial Liaison Innovation Center, Pusan National Univ.)
  • 강영수 (부산대학교 항공우주공학과) ;
  • 두민수 ((주)태림산업 기술연구소) ;
  • 김정 (부산대학교 항공우주공학과) ;
  • 강범수 (부산대학교 항공우주공학과) ;
  • 송우진 (부산대학교 부품소재산학협력연구소)
  • Received : 2012.08.20
  • Accepted : 2012.10.03
  • Published : 2012.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Due to the development of electric and hybrid vehicles, the trend has changed from hydraulic power steering system to electric power steering system (EPS). In this paper, design parameters are deduced through the structural analysis based on the finite element analysis for the intermediate shaft of the EPS on the market. By analyzing the design parameters, the structure design is improved to support the required high torque on the EPS. The numerical analysis is performed to obtain the improved design of the intermediate shaft model and the analysis results are compared with the existing model. It is noted through this numerical approach that the improved design of the intermediate shaft can be acquired the structural safety and high stiffness than existing model.

Keywords

References

  1. Yun, S. C., Jang, J. H., and Han, C. S., "Modeling of the Motor Driven Power Steering System," Proc. of KSAE Spring Conference, pp. 280-285, 2003.
  2. Kim, C. K., Lee, I. K., and Cho, S. H., "Case Study of Tribological Failure Characteristics in Automotive Steering System," Journal of the KSTLE, Vol. 26, No. 1, pp. 61-67, 2010.
  3. Kim, J. B., Yoo, W. S., and Sim, J. J., "Angular Velocity of Steering Column according to Spider Cross Angle in the Universal Joint," Proc. of KSAE Fall Conference, pp. 713-718, 2000.
  4. Song, J. H., Boo, K. S., and Lee, J. I., "Evaluation of Performance and Development of Control Method of a New Electric Power Steering System(EPS-TT)," Journal of the KSAE, Vol. 12, No. 5, pp. 154-161, 2004.
  5. Koo, K. M., Lee, J. H., Kim, J. M., and Park, J. N., "Evaluation of steering emotional quality with Intermediate Shaft Assembly according to Types and condition in steering system," KSAE Annual Conference, pp. 2501-2508, 2009.
  6. Jang, B. C. and So, S. G., "Co-Simulation Technology Development with Electric Power Steering System and Full Vehicle," J. of the KSPE, Vol. 21, No. 1, pp. 94-100, 2004.
  7. Choi, K. H., Jeong, Y. K., Lee, B. I., and Kim, H. Y., "Finite Element Analysis and Shape Design for Coated Intermediate Shaft of Steering System," KSAE Annual Conference, pp. 1284-1288, 2009.
  8. Ueda, H., "Technical Trends regarding Intermediate Shaft in Steering Systems," Koyo Engineering Journal, No. 168, pp. 14-17, 2005.