과제정보
연구 과제 주관 기관 : 한국산업기술진흥원
참고문헌
- T. A. Osswald, L.-S. Turng, and P. J. Gramann, Injection Molding Handbook, Hanser, Munich, 2001.
- M.-Y. Lyu and H.-Y. Kim, Polymer Science and Technology, 20, 157 (2009).
- M.-Y. Lyu, J.-H. Mo, and W.-J. Jeong, Elastomers and Composites, 38, 295 (2003).
- J. H. Mo and M.-Y. Lyu, Transact. Mater. Proc., 13, 515 (2004).
- J. S. Hong, S. R. Park, and M.-Y. Lyu, Polymer(Korea), 35, 1 (2011).
- K. Park, J.-H. Ahn, and C.-H. Yim, KSME, 27, 507 (2003). https://doi.org/10.3795/KSME-A.2003.27.4.507
- J. H. Cho, S. R. Park, H. Kim, and M.-Y. Lyu, Polymer(Korea), 36, 131 (2012).
- S. J. Liao, D. Y. Chang, H. J. Chen, L. S. Tsou, J. R. Ho, H. T. Yau, and W. H. Hsieh, Polym. Eng. Sci., 44, 917 (2004). https://doi.org/10.1002/pen.20083
- H. Oktem, T. Erzurumlu, and I. Uzman, Materials & Design, 28, 1271 (2007). https://doi.org/10.1016/j.matdes.2005.12.013
- M.-A Kang and M.-Y. Lyu, Polymer(Korea), 32, 502 (2008).
- Z. Lu and K. F. Zhang, Polym. Eng. Sci., 49, 1661 (2009). https://doi.org/10.1002/pen.21167
- P. Larpsuriyakul and H.-G. Fritz, Polym. Eng. Sci., 51, 411 (2011). https://doi.org/10.1002/pen.21849
- Y. Zhou and P. K. Mallick, Mater. Sci. Eng., 393, 303 (2005). https://doi.org/10.1016/j.msea.2004.10.038
- J. L. Thomason, Compos. Sci. Technol., 59, 2315 (1999). https://doi.org/10.1016/S0266-3538(99)00083-4
- A. Bernasconi, P. Davoli, A. Basile, and A. Filippi, Inter. J. Fatigue, 29, 199 (2007).
- E. Kontou and A. Kallimanis, Compos. Sci. Technol., 66, 1588 (2006). https://doi.org/10.1016/j.compscitech.2005.11.017
- C. M. Sonsino and E. Moosbrugger, Inter. J. Fatigue, 30, 1279 (2008). https://doi.org/10.1016/j.ijfatigue.2007.08.017
- M. Lee, J. H. Kim, S. R. Park, and M.-Y. Lyu, Elastomers and Composites, 44, 373 (2009).
- H. Kim, M. Lee, and M.-Y. Lyu, Polymer(Korea), 36, 555 (2012).
피인용 문헌
- Observation of Two-Dimensional Shaped Aluminum Flake Orientation During Injection Molding and Its Orientation Mechanism pp.2092-7673, 2019, https://doi.org/10.1007/s13233-019-7097-1
- 유리섬유 강화 폴리카보네이트의 환상형상부품 사출성형시 성형수축에 관한 연구 vol.48, pp.4, 2012, https://doi.org/10.7473/ec.2013.48.4.300
- A Study on the Mechanical Property and 3D Fiber Distribution in Injection Molded Glass Fiber Reinforced PA66 vol.29, pp.3, 2014, https://doi.org/10.3139/217.2844
- 나일론66/탄소필러 복합체의 가공조제에 따른 물성 및 용융흐름특성 연구 vol.42, pp.3, 2012, https://doi.org/10.7317/pk.2018.42.3.478
- Effect of warpage on the operation of a rapid cooling and heating device vol.41, pp.8, 2012, https://doi.org/10.1007/s40430-019-1806-8