DOI QR코드

DOI QR Code

균일침전법을 이용한 아나타제형 TiO2 분말의 제조 및 특성 평가

Synthesis and Characterization of Anatase TiO2 Powder using a Homogeneous Precipitation Method

  • 최순옥 (강원대학교 신소재공학과) ;
  • 조지희 (강원대학교 신소재공학과) ;
  • 임성환 (강원대학교 신소재공학과) ;
  • 정은영 (현대자동차 남양연구소 재료분석팀)
  • Choi, Soon Ok (Department of Advanced Materials Science and Engineering, Kangwon National University) ;
  • Cho, Jee Hee (Department of Advanced Materials Science and Engineering, Kangwon National University) ;
  • Lim, Sung Hwan (Department of Advanced Materials Science and Engineering, Kangwon National University) ;
  • Chung, Eun Young (Materials Technology & Analysis Team, Research & Development Division, Hyundai Motor Co. & Kia Motors Corp)
  • 투고 : 2011.01.27
  • 발행 : 2011.05.25

초록

This paper studies the experimental method that uses the homogeneous precipitation method to prepare mica flakes coated with anatase-type titania pearlescent pigment with urea as precipitant. The optimum technology parameters, the chemical composition, the microstructure, and the color property of resulting pigments are discussed. The coating principle of mica coated titania with various coating thickness is analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy(TEM) and tested by spectrophotometer analysis. The colored nanocrystalline pigments with different morphology and coating thickness 45-170 nm were prepared by homogeneous precipitation treatment of $TiOSO_4$(titanum oxysulfate) aqueous solutions. Characterizations on the pigments show that the pearlescent effects of the pigments depend mainly on mica size, thickness of the metal oxide deposit, its chemical composition, and crystal structure.

키워드

과제정보

연구 과제 주관 기관 : 교육인적자원부, 한국연구재단

참고문헌

  1. J. -H. Cho and S. -H. Lim, Dye pigments 69, 192 (2006). https://doi.org/10.1016/j.dyepig.2005.03.002
  2. J. -H. Cho, Y. -D. Tak, Y. -W. Kim, and S. -H. Lim, Met. Mater. Int. 15, 1001 (2009). https://doi.org/10.1007/s12540-009-1001-z
  3. E. -Y. Chung, C. -K. Im, and S. -H. Lim, JSAE Annual Congress Proceedings 16, 17 (2005).
  4. R. Maisch, Prog. Org. Coat. 22, 261 (1993). https://doi.org/10.1016/0033-0655(93)80028-9
  5. A. Sh. Gershenkop, L. G. Gerasimova, M. S. Khokhulya, N. M. Zhadanova, and R. F. Okhrimenko, Inorg. Mater. 37, 531 (2001). https://doi.org/10.1023/A:1017501522564
  6. F. J. Maile, G. Pfaff, and P. Reynders, Prog. Org. Coat. 54, 150 (2005). https://doi.org/10.1016/j.porgcoat.2005.07.003
  7. J. Tan, F. Xiansong, H. Wenxiang, and C. Xiuzeng, W. Li, Dyes Pigments 56, 93 (2003). https://doi.org/10.1016/S0143-7208(02)00103-1
  8. W. Stoecklein, PCI, 48 (2001).
  9. R. Maisch, Prog. Org. Coat. 27, 145 (1996). https://doi.org/10.1016/0300-9440(95)00530-7
  10. S. -H. Lee, J. Korean Ind. & Eng. Chem. 8, 903 (1995).
  11. G.-H. Kim, W.-J. Lee, D.-G. Kim, S.-K. Lee, S.-H. Lee, and I.-S. Kim, Kor. J. Met. Mater. 48, 543 (2010).
  12. V. Stengl, J. Subrt, S. Bakardjieva, A. Kalendova, and P. Kalenda, Dyes Pigments 58, 239 (2003). https://doi.org/10.1016/S0143-7208(03)00086-X
  13. S. Taruta, K. Watanabe, K. Kunio, and N. Takusagawa, J Non Cryst Solids 321, 96 (2003). https://doi.org/10.1016/S0022-3093(03)00105-4
  14. G. B. Song, J. K. Liang, F. S. Liu, T. J. Peng, and G. H. Rao, Thin solid film 491, 110 (2005). https://doi.org/10.1016/j.tsf.2005.05.035
  15. Y.-C Park, H. -J. Kim, C. -H. Kwak, and T.-S. Suh, J. Korean Ind. & Eng. Chem. 8, 709 (1997).
  16. H.-N. Lee, Surface Science Reports 48, 53 (2003). https://doi.org/10.1016/S0167-5729(02)00100-0
  17. P. Eskelinen, M. Ritala, and M. Leskela, J. Solid State Chem. 103, 160 (1993). https://doi.org/10.1006/jssc.1993.1088