Acknowledgement
Supported by : 연구재단
References
- ASTM manual on Zirconium and Hafnium ASTM special technical publication 639 J. H. Schemel.
- Erich Tenckhoff, Deformation mechanisms, texture, and anisotropy in Zirconium and Zircaloy, Special technical publication, STP 966.
- Zirconium alloy fuel clad tubing engineering guide, First edition December 1989, Sandvik Special Metals Corporation.
- E. Tenckhoff and P. L. Rittenhouse, Annealing textures in Zircaloy tubing, Oak Ridge national laboratory, Received 5 Sep. (1969).
- S. Y. Lee, K. T. Kim, and S. I. Hong, J. Nucl. Mater. 392, 63 (2009). https://doi.org/10.1016/j.jnucmat.2009.03.045
- S. Ko, S. I. Hong, and K. T. Kim, J. Nucl. Mater. 404, 154 (2010). https://doi.org/10.1016/j.jnucmat.2010.07.023
- Know-why technology on specifications II. Zirconium alloy, KNF, 2004.12.
- Jinyuan Yan, Crystallographic texture and creep anisotropy cold worked and recrystallized Zirlo, Department of nuclear engineering north carolina state university raleigh, NC 27695-7909, March (2005).
- Jean-Paul Mardon, Daniel Charquet, Jean Senevat, Optimization of PWR Behavior of Stress-Relieved Zircaloy-4 Cladding Tubes by Inspection Process, Zirconium in the Nuclear Industry: Tenth International Symposium, Jun. STP 1245 (1993).
- Takao konishi, Masahiro Honji, Tatsuhisa Kojima, and Hideaki Abe, Effect of Cold Reduction on Anisotropy of Zircaloy Tubing, Seventh International Symposium, Jun. STP 939 (1985).
- M. L. Picklesimer, Anisotropy in Zircaloy, Seventh International Symposium, Jun. STP 939 (1985).
- Nuclear Zirconium Alloy Market, Special Ux Consulting Report, Ux Consulting Nov. 2008.
- James P. Schaffer, Ashok Saxena, Stephen D. Antolovich, Thomas H. Sanders, and Steven B. Warner, Science and Design of Engineering Materials, Richard D. Irwin, Inc. (1995).
- George P. Sabol et al., Development of a Cladding Alloy for High Burnup, Zirconium in the Nuclear Industry: Eighth International Symposium, STP1023 (1993).
- Toshiya Kido et al., Quantitative Assessment of Irradiation Effect on Creep and Corrosion Properties of Zr-base Alloys. Zirconium in the Nuclear Industry: Thirteenth International Symposium, STS 1423 (1998).
- F. Garzarolli, H. Stehle, and E. Steinberg, Behavior and Properties of Zircaloys in Power Reactors, zirconium in the Nuclear Industry : Eleventh International Symposium, STP 1295 (1996).
- J. J. Kearns, Thermal Expansion and Preferred Orientation in Zircaloy, WAPD-TM-472 (1965).
- H. Inui, S. I. Hong, and C. Laird, Acta Metall. et Mater. 38, 2261 (1990). https://doi.org/10.1016/0956-7151(90)90093-V
- Y. C. Choi, S. Ko, K. I. Chang, N. C. Cho, and S. I. Hong, J. Nucl. Mater. 383, 270 (2009). https://doi.org/10.1016/j.jnucmat.2008.09.023
- K. I. Chang and S. I. Hong, J. Nucl. Mater. 373, 16 (2008). https://doi.org/10.1016/j.jnucmat.2007.04.045
- S. I. Hong, Mater. Sci. Eng. 79, 1 (1986). https://doi.org/10.1016/0025-5416(86)90380-0
- S. I. Hong, Mater. Sci. Eng. 120, 1 (1984).
- S. I. Hong, Mater. Sci. Eng. 91, 137 (1987). https://doi.org/10.1016/0025-5416(87)90291-6
- S. I. Hong, Mater. Sci. Eng. 76, 77 (1985). https://doi.org/10.1016/0025-5416(85)90082-5
- Microstructural and mechanical characterization of asreceived and annealed Zircaloy-4 claddings produced by various manufacturers, KNF (1996).
- W. Liu, Q. Li, B. Zhou, Q. Yan, and M. Yao, J. Nucl. Mater. 341, 97 (2005). https://doi.org/10.1016/j.jnucmat.2005.01.007
- H. Jeong, H. G. Kim, and T. H. Kim, J. Nucl. Mater. 317, 1 (2003). https://doi.org/10.1016/S0022-3115(02)01676-8
- B. Cox, J. Nucl. Mater. 336, 331 (2005). https://doi.org/10.1016/j.jnucmat.2004.09.029
- K. N. Choo, Y. H. Kang, S. I. Pyun, and V. F. Urbanic, J. Nucl. Mater. 209, 226 (1994). https://doi.org/10.1016/0022-3115(94)90256-9
- Y. H. Jeong, H. G. Kim, D. J. Kim, B. K. Choi, and J. H. Kim, J. Nucl. Mater. 323, 72 (2003).
- J. M. Kim, Y. H. Jeong, and Y. H. Jung, J. Nucl. Mater. 104, 145 (2000).
- M. H. Lee, Y. H. Jung, B. K. Choi, S. Y. Park, H. G. Kim, J. Y. Park, Y. H. Jeong, J. Kor. Inst. Met. & Mater. 47, 474 (2009).