참고문헌
- Hamaguchi, H., Spikes, H., and Cameron, A., "Elastohydrodynamic Properties of Water in Oil Emulsions," Wear, Vol. 43, pp. 17-24, 1977. https://doi.org/10.1016/0043-1648(77)90039-4
- Dow, T., 1977, "A Rheology Model for Oil-in-Water," CASA Technical Paper #Ms77-339.
- Nakahara, T., Makino, T. and Kyogoku, K., "Observations of Liquid Droplet Behavior and Oil Film Formation in O/W Type Emulsion Lubrication," ASME Journal of Tribology, Vol. 110, pp. 348-353, 1988. https://doi.org/10.1115/1.3261630
- Lunberg, J., "Rheological Model of a Dilute Emulsion," STLE Tribology Transactions, Vol. 31, pp. 83-90, 1988. https://doi.org/10.1080/10402008808981802
- Paranjpe, R. S., "Analysis of Non-Newtonian Effects in Dynamically Loaded Finite Journal Bearings Including Mass Conserving Cavitation," ASME Journal of Tribology, Vol. 114, pp. 736-744, 1992. https://doi.org/10.1115/1.2920943
- Dien, I. K. and Elrod, H. G., "A Generalized Steady-State Reynolds Equation for non-Newtonian Fluids, with Application to Journal Bearings," J. Lubrication Technology, Vol. 105, pp. 385-390, 1983. https://doi.org/10.1115/1.3254619
- Nayfeh, A. H., 1973, Perturbation Methods, John Wiley & Sons, Inc.
- Dai, F. and Khonsari, M. M., "A Theory of Hydrodynamic Lubrication Involving the Mixture of Two Fluids," Int. J. Engng. Sci., Vol. 61, pp. 634-641, 1994.
- Taylor, C. M., "Turbulent Lubrication Theory Applied to Fluid Film Bearing Design," Proc. Inst. Mech. Engrs., Vol. 184, Part 3L, pp. 40-47, 1969-1970.
- Constantinescu, V. N., "Basic Relationships in Turbulent Lubrication and Their Extension to Include Thermal Effects," Trans. of the ASME, J. of Lubrication Technology, Vol. 95, pp. 147-154, 1973. https://doi.org/10.1115/1.3451755
- Safar, Z. and Szeri, A. Z., "Thermohydrodynamic Lubrication in Laminar and Turbulent Regimes," Trans. of the ASME, J. of Lubrication Technology, Vol. 96, pp. 48-57, 1974. https://doi.org/10.1115/1.3451908
- Chun, S. M. and Lalas, D. P., "Parametric Study of Inlet Oil Temperature and Pressure for a Half-Circumferential Grooved Journal Bearing," STLE Tribology Transaction, Vol. 35, no. 2, pp. 213-224, 1992. https://doi.org/10.1080/10402009208982111
- Chun, S. M., "Aeration Effects on the Performance of a Turbocharger Journal Bearing," Tribology International, Vol. 41, pp. 296-306, 2008. https://doi.org/10.1016/j.triboint.2007.08.006
- Chun, S. M., "A Parametric Study on bubble lubrication of High-Speed Journal Bearings," Tribology International, Vol. 35, No. 1, pp. 1-13, 2002. https://doi.org/10.1016/S0301-679X(01)00072-X
- Holman, J. P., 2002, Heat Transfer, 9th edition, Appendix A, Table A-9, McGraw-Hill Companies, Inc.
- Chun, S. M., "Study on Mixing Flow Effects in a High-Speed Journal Bearing," Tribology International, vol. 34, no. 6, pp. 397-405, 2001. https://doi.org/10.1016/S0301-679X(01)00030-5
피인용 문헌
- The Performance Comparison between the Mixture of Each Liquid to be Blended and Multi-grade Engine Oil as a Single Fluid in a High Speed Thermo-hydrodynamic Journal Bearing vol.28, pp.2, 2012, https://doi.org/10.9725/kstle.2012.28.2.081
- Development of a Simulation Program to Predict the Performance of the Multi-grade Lubricant before Blending Base Oil with Additives vol.28, pp.2, 2012, https://doi.org/10.9725/kstle.2012.28.2.047