Korean Journal of Computational Design and Engineering (한국CDE학회논문집)

Society for Computational Design and Engineering (한국CDE학회)
권호 표지

A Preliminary Study for Quantifying Appearance Assessment of Assembly Seam Gaps - Case Study of Drawer Assembly

조립품 심(seam)의 갭(gap)에 대한 정량적 심미평가의 기초연구 - 서랍장을 대상으로 한 사례연구

  • 이해승 (홍익대학교 대학원 기계공학과) ;
  • 이래우 (홍익대학교 대학원 기계공학과) ;
  • 임현준 (홍익대학교 기계시스템디자인공학과)
  • Received : 2011.08.05
  • Accepted : 2011.08.31
  • Published : 2011.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

Esthetic appeal of a product is often affected by the appearance quality of seams forming between components of the product. The appearance quality of seams is, however, assessed in a very subjective and qualitative manner that heavily depends on the evaluator. This paper presents a preliminary study to quantify such assessment by formulating a quantitative index which is a linear function of the seam gap sizes, seam gap ranges, and the size uniformity of seam gaps. By considering a highly simplified problem of a drawer system and utilizing subjective assessments by twenty evaluators, the index has been formulated. The validity of this index has been confirmed by observing its behavior with changes of the component tolerances. Also, the utility of this index has been demonstrated through a selective assembly scheme applied to the drawer system problem. Though the index formulated in this study for seam appearance quality may be useful, future studies are necessary to make the model readily applicable to real problems.

Keywords

References

  1. Welker, B. R., "Feature Based Variation Modeling of Preliminary Injection Molded Parts," Master Degree Thesis, Massachusetts Institute of Technology, June 1998.
  2. Franciosa, P., Gerbino, S. and Patalano, S., "Variational Modeling and Assembly Constraints in Tolerance Analysis of Rigid Part Assemblies: Planar and Cylindrical Features", International Journal of Advanced Manufacturing Technology, Vol. 49, pp. 239-251, 2010. https://doi.org/10.1007/s00170-009-2400-5
  3. 탁정기, "제품개발 단계에서 최적공차 설계를 위한 누적공차 해석 적용," 한국자동차공학회 2005년 추계학술대회논문집, pp. 1743-1752, 2005.
  4. Stadzisz, P. C. and Henrioud, J. M., "An Integrated Approach for the Design of Multi-product Assembly Systems," Computers in Industry, Vol. 36, pp. 21-29, 1998. https://doi.org/10.1016/S0166-3615(97)00094-8
  5. Moroni, G. and Polini, W., "Tolerance-based Variations in Solid Modeling," Journal of Computing and Information Science in Engineering, Vol. 3, pp. 345-352, 2003. https://doi.org/10.1115/1.1631581
  6. Ceglarek, D. J. and Shi, J., "Tolerance Analysis for sheet Metal Assembly Using a Beam-Based Model," ASME International Mechanical Engineering Congress and Exposition, DE-vol. 94, pp. 153-159, 1997
  7. 이래우, "슬라이드 형 휴대전화기의 갭 품질 개선을 위한 부품의 공차해석 및 설계," 석사 학위 논문, 홍익대학교, pp. 22-36, 2010.
  8. Maxfield, J., Juster, N. P., Dew, P. M., Taylor, S., Fitchie, M., Ion, W. J., Zhao, J. and Thompson, M., "Predicting Product Cosmetic Quality Using Virtual Environment," Proc. ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Baltimore, MD, September 10-13, 2000.
  9. Juster, N. P., Fitchie, M., Taylor, S., Dew, P., Maxfield, J. and Zhao, J., "Visualising the Impact of Tolerances on Cosmetic Product Quality," Proc. International Conference on Engineering Design Glasgow, August 21-23, 2001.
  10. Wickman, C. and Soderberg, R., "Defining Quality Appearance Index Weights by Combining VR and CAT Technologies," Proc. ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Pittsburgh, PA, September 9-12, 2001.
  11. Soderberg, R. and Lindkvist, L., "Automated Seam Variation and Stability Analysis for Automotive Body Design," Geometric Product Specification and Verification: Integration of Functionality, pp. 255-264, 2003.
  12. Wickman, C. and Soderberg, R., "Comparison of Non-Nominal Geometry Models Represented in Physical Versus Virtual Environments," Journal of Computing and Information Science in Engineering, Vol. 4, pp. 171-177, 2004. https://doi.org/10.1115/1.1765120
  13. Wickman, C. and Soderberg, R., "Perception of Gap and Flush in Virtual Environments," Journal of Engineering Design, Vol. 18, pp. 175-193, 2007. https://doi.org/10.1080/09544820600751023
  14. Soderberg, R. and Lindkvist, L., "Stability and Seam Variation Analysis for Automotive Body Design," Journal of Engineering Design, Vol. 13, No. 2, pp. 173-187, 2002. https://doi.org/10.1080/09544820210129788
  15. 김병억, 이웅직, 디자인 개론, 태학원, pp. 33-34, 1999
  16. Ceglarek, D. and Shi, J., "Dimensional Variation Reduction for Automotive Body Assembly," Journal of Manufacturing Review, Vol. 8, No. 2, pp. 139-154, 1995
  17. Mease, D., Nair, V. N. and Sudjianto, A., "Selective Assembly in Manufacturing: Statistical Issues and Optimal Binning Strategies," American Statistical Association and the American Society for Quality Technometrics, Vol. 46, No. 2, pp. 165-175, 2004.