References
- Kim, J. H., Choi, J. H., and Kim, K. Y., 2009, "Design Optimization of a Centrifugal Compressor Impeller Using Radial Basis Neural Network Method," ASME Turbo Expo 2009, Florida, USA, GT2009-59666.
- Benini, E., 2004, "Three-Dimensional Multi-Objective Optimization of a Transonic Compressor Rotor," AIAA Journal of Propulsion and Power, Vol. 20, No. 3, pp. 559∼565. https://doi.org/10.2514/1.2703
- Samad, A., and Kim, K. Y., 2009, "Application of Surrogate Modeling to Design of a Compressor Blade to Optimize Stacking and Thickness," International Journal of Fluid Machinery and Systems, Vol. 2, No. 1, pp. 1∼12. https://doi.org/10.5293/IJFMS.2009.2.1.001
- Rabe, D. C., and Hah, C., 2002, "Application of Casing Circumferential Grooves for Improved Stall Margin in a Transonic Axial Compressor," ASME Turbo Expo 2002, Amsterdam, Netherlands, GT2002-30641.
- Houghton, T., and Day, I., 2009, "Enhancing the Stability of Subsonic Compressor Using Casing Grooves," ASME Turbo Expo 2009, Florida, USA, GT2009-59210.
- Muller, M. W., Schiffer, H. P., and Hah, C., 2007, "Effect of Circumferential Grooves on the Aerodynamic Performance of an Axial Single-Stage Transonic Compressor," ASME Turbo Expo 2007, Montreal, Canada, GT2007-27365.
- Tuo, W., Lu, Y., Yuan, W., Zhou, S., and Li, Q., 2009, "Experimental Investigation on the Effects of Unsteady Excitation Frequency of Casing Treatment on Transonic Compressor Performance," ASME Turbo Expo 2009, Florida, USA, GT2009-59281.
- Brignole, G. A., Danner, F. C. T., and Kau, H. P., 2008, "Time Resolved Simulation and Experimental Validation of the Flow in Axial Slot Casing Treatments for Tansonic Axial Compressors," ASME Turbo Expo 2008, Berlin, Germany, GT2008-50593.
- Kim, J. H., Choi, K. J., Husain, A., and Kim, K. Y., 2011, "Multiobjective Optimization of Circumferential Casing Grooves for a Transonic Axial Compressor," AIAA Journal of Propulsion and Power, Vol. 27, No. 3, pp. 730∼733. https://doi.org/10.2514/1.50563
- Myers, R. H., and Montgomery, D. C., 1995, Response Surface Methodology: Process and Product Optimization Using Designed Experiments, John Wiley & Sons, New York, USA.
- Deb, K., and Goel, T., 2001, "A Hybrid Multi-Objective Evolutionary Approach to Engineering Shape Design," Proceeding of Evolutionary Multi-Criterion Optimization Conference, Zurich, Swizerland, pp. 385∼399.
- Reid, L., and Moore, R. D., 1978, "Design and Overall Performance for Four Highly-Loaded, High-Speed Inlet Stage for an Advanced, High-Pressure-Ratio Core Compressor," NASA TP-1337.
- ANSYS CFX-11.0, 2006, ANSYS CFX-Solver Theory Guide, ANSYS Inc.
- Chen, H., Huang, X., and Fu, S., 2006, "CFD Investigation on Stall Mechanisms and Casing Treatment of a Transonic Compressor," 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Sacramento, CA, AIAA Paper 2006-4799.
- Choi, K. J., and Kim, J. H., and Kim, K. Y., 2010, "Design Optimization of Circumferential Casing Grooves for a Transonic Axial Compressor to Enhance Stall Margin," ASME Turbo Expo 2010, Glasgow, UK, GT2010-22396.
-
$JMP{\circedR}$ $< 6.0.0, 2005, The Statistical Discovery Software, Version 6.0.0, SAS Institute, INC., Cary, North Carolina, USA. - Deb, K., 2001, Multi-Objective Optimization Using Evolutionary Algorithms, 1st ed., John Wiley & Sons Inc., Chichester, England.
-
$MATLAB{\circedR}$ 7.0, 2004, The Language of Technical Computing, Release 14, The Mathworks Inc., Natick, MA, USA. - Guinta, A. A., 1997, "Aircraft Multidisciplinary Design Optimization Using Deisng of Experimental Theory and Response Surface Modeling Mothods," Ph. D. Dissertant, Department of Aerospace Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA.
- Wilke, I., Kau, H. P., and Brignole, G., 2005, "Numerically Aided Design of a High-Efficient Casing Treatment of a Transonic Compressor," ASME Turbo Expo 2005, Nevada, USA, GT2005-68993.