References
-
K. P. Kang, K. H. Lee, Y. S. Kim, M. W. Ji, Y. S. Suh, 2008, Prediction of phase transformation of boron steel sheet during hot press forming using material properties modeler and
$DEFORM^{TM}$ -HT, Trans. Mater. Process., Vol. 17, No. 4, pp. 249-256. https://doi.org/10.5228/KSPP.2008.17.4.249 - D. H. Lee, T. J. Kim, J. D. Lim, H. J. Lim, 2009, Development of high strength steel body by hot stamping, Trans. Mater. Process., Vol. 18, No. 4, pp. 304-309. https://doi.org/10.5228/KSPP.2009.18.4.304
-
R. Kolleck, J. Aspacher, R. Veit, 2009, Efficiency of hot forming processes, Proc. 2nd Int. Conf. on Hot Steel Metal Forming of High-Performance Steel
$CHS^2$ (eds. M. Oldenburg, K. Steinhoff, B. Prakash), Verlah Wissenschaftliche Scripten, Auerbach, Germany, pp. 173-179. -
H. So, H. Hoffmann, R. Golle, 2009, Blanking of press hardened ultra high strength steel, Proc. 2nd Int. Conf. on Hot Steel Metal Forming of High-Performance Steel
$CHS^2$ (eds. M. Oldenburg, K. Steinhoff, B. Prakash), Verlah Wissenschaftliche Scripten, Auerbach, Germany, pp. 137-146. -
I. Vall, B. Casas, N. Rodriguez, 2009, Improving die durability in hot stamping and hard cutting, Proc. 2nd Int. Conf. on Hot Steel Metal Forming of High-Performance Steel
$CHS^2$ (eds. M. Oldenburg, K. Steinhoff, B. Prakash), Verlah Wissenschaftliche Scripten, Auerbach, Germany, pp. 331-338. -
I. Picas, R. Hernandez, D. Casellas, B. Casas, I. Valls, 2008. Tool performance in cutting of hot stamped steels, Proc. 1st Int. Conf. on Hot Steel Metal Forming of High-Performance Steel
$CHS^2$ (eds. M. Oldenburg, K. Steinhoff, B. Prakash), GRIPS media GmbH, Bad Harzburg, Germany, pp. 179-189. - W. S. Lim, K. J. Nam, H. S. Choi, B. M. Kim, 2010, A study on optimization of cooling channel design for uniform hardness of hat-shape component in hot stamping, Proc. Kor. Soc. Mech. Eng. Fall Conf., Kor. Soc. Mech. Eng., Busan, Korea, pp. 12-17.
- M. Naderi, L, Durrenberger, A, Molinari, W. Bleck, 2008, Constitutive relationships for 22MnB5 boron steel deformed isothermally at high temperatures, Mater. Sci. Eng., A, Vol. 478, pp. 130-139. https://doi.org/10.1016/j.msea.2007.05.094
Cited by
- Effect of hot-stamping process conditions on the changes in material strength vol.16, pp.4, 2015, https://doi.org/10.1007/s12239-015-0063-9
- Effect of the Die Temperature and Blank Thickness on the Formability of a Laser-Welded Blank of a Boron Steel Sheet with Removing Al-Si Coating Layer vol.6, 2014, https://doi.org/10.1155/2014/925493
- Blank Shape Design Process for a Hot Stamped Front Pillar and its Experimental Verification vol.21, pp.3, 2012, https://doi.org/10.5228/KSTP.2012.21.3.186
- Evaluation of Contact Heat Transfer Coefficient and Phase Transformation during Hot Stamping of a Hat-Type Part vol.8, pp.4, 2015, https://doi.org/10.3390/ma8042030