References
- Ma, J. and Jiang, J., 2011, Applications of Fault Detection and Diagnosis Methods in Nuclear Power Plants: A Review, Progress in Nuclear Energy, Vol. 53, No. 3, pp. 255-266. https://doi.org/10.1016/j.pnucene.2010.12.001
- Stoisser, C. M. and Audebert, S., 2008, A Comprehensive Theoretical, Numerical and Experimental Approach for Crack Detection in Power Plant Rotating Machinery, Mechanical System and Signal Processing, Vol. 22, No. 4, pp. 818-844. https://doi.org/10.1016/j.ymssp.2007.11.013
- Staszewski, W. J., et al., 1999, Cross-wavelet Analysis for Lamb Wave Damage Detection in Composite Materials Using Optical Fibers, Key Engineering Materials, Vol. 167-168, No. 2, pp. 166-170.
- Cheng, Y. M., Lee, D. H. and Jung, H. K., 2004, Ultrasonic Guided Wave Parameters for Detection of Axial Cracksin Feeder Pipes of PHWR Nuclear Power Plants, Ultrasonics, Vol. 42, No. 4, pp. 883-888. https://doi.org/10.1016/j.ultras.2004.01.073
- Goktepe, M., 2001, Non-destructive Crack Detection by Capturing Local Flux Leakage Field, Sensors and Actuators, Vol. 91, No. 6, pp. 70-72. https://doi.org/10.1016/S0924-4247(01)00511-8
- Pandey, A. K., Biswas, M. and Samman, M. M., 1991, Damage Detection from Changes in Curvature Mode Shapes, Journal of Sound and Vibration, Vol. 145, No. 2, pp. 321-332. https://doi.org/10.1016/0022-460X(91)90595-B
- Loutridis, S. J., 2004, Damage Detection in Gear Systems Using Empirical Mode Decomposition, Engineering Structures, Vol. 26, No. 12, pp. 1833- 1841. https://doi.org/10.1016/j.engstruct.2004.07.007
- Miles, T. J., et al., 1999, Torsional and Bending Vibration Measurement on Rotors Using Laser Technology, Journal of Sound and Vibration, Vol. 226, No. 3, pp. 441-467. https://doi.org/10.1006/jsvi.1999.2253
- Yu, L. and Giurgiutiu, V., 2008, In Situ 2-D Piezoelectric Wafer Active Sensors Arrays for Guided Wave Damage Detection, Ultrasonics, Vol. 48, No. 2, pp. 117-134. https://doi.org/10.1016/j.ultras.2007.10.008
- Fulmek, P. L., et al., 2002, Capacitive Sensor for Relative Angel Measurement, IEEE Trans. on Instrumentation and Measurement, Vol. 51, No. 6, pp. 1145-1149. https://doi.org/10.1109/TIM.2002.808052
- Lee, H. C. and Kim, Y. Y., 2002, Wave Selection Using a Magnetomechanical Sensor in a Solid Cylinder, Journal of Acoustical Society of America, Vol. 112, No. 3, pp. 953-960. https://doi.org/10.1121/1.1497623
- Lee, H. C., 2008, Mode-selective Ultrasonic Wave Sensor and Its Characteristics, Journal of Mechanical Science and Technology, Vol. 22, No. 2, pp. 247-254. https://doi.org/10.1007/s12206-007-1107-5
- Han, S. W., Lee, H. C. and Kim, Y. Y., 2003, Noncontact Damage Detection of a Rotating Shaft Using the Magnetostrictive Effect, Journal of Nondestructive Evaluation, Vol. 22, No. 4, pp. 141-150. https://doi.org/10.1023/B:JONE.0000022033.96593.79
- Darpe, A. K., 2007, A Novel Way to Detect Transverse Surface Crack in a Rotating Shaft, Journal of Sound and Vibration, Vol. 305, No. 8, pp. 151-171. https://doi.org/10.1016/j.jsv.2007.03.070
- Lee, H. C. and Bae, W., 2010, Study on the Elimination of Irreversible Magnetic Components Using Anhysteretization in a Magnetostrictive Vibration Sensor, Transactions of Korean Society for Noise and Vibration Engineering, Vol. 20, No. 9, pp. 841-848. https://doi.org/10.5050/KSNVE.2010.20.9.841
- Mallat, S., 1998, A Wavelet Tour of Signal Processing, Academic Press, London.
- Williams, R. C., 1959, Theory of Magnetostrictive Delay Lines for Pulse and Continuous Wave Transmission, IRE Trans. on Ultrasonic Engineering, Vol. 7, No. 1, pp. 16-38.
Cited by
- Study on the Development of Noncontact Vibration Exciter for Thin Plates Using Magnetism vol.26, pp.1, 2016, https://doi.org/10.5050/KSNVE.2016.26.1.104