유연 기판 위에 증착된 IZO 박막의 구조적 및 전기적 특성

Structural and electrical characteristics of IZO thin films deposited on flexible substrate

  • 이봉근 (한국기술교육대학교 신소재공학과) ;
  • 이규만 (한국기술교육대학교 신소재공학과)
  • Lee, B.K. (Dept. of Materials Engineering, Korea University of Technology and Education) ;
  • Lee, K.M. (Dept. of Materials Engineering, Korea University of Technology and Education)
  • 투고 : 2011.05.05
  • 심사 : 2011.05.31
  • 발행 : 2011.06.30

초록

In this study, we have investigated the structural and electrical characteristics of IZO thin films deposited on flexible substrate for the OLED (organic light emitting diodes) devices. For this purpose, PES was used for flexible substrate and IZO thin films were deposited by RF magnetron sputtering under oxygen ambient gases (Ar, $Ar+O_2$) at room temperature. In order to investigate the influences of the oxygen, the flow rate of oxygen in argon mixing gas has been changed from 0.1sccm to 0.5sccm. All the samples show amorphous structure regardless of flow rate. The electrical resistivity of IZO films increased with increasing flow rate of $O_2$ under $Ar+O_2$. All the films showed the average transmittance over 85% in the visible range. The OLED device was fabricated with different IZO electrodes made by configuration of IZO/a-NPD/DPVB/$Alq_3$/LiF/Al to elucidate the performance of IZO substrate. OLED devices with the amorphous-IZO (a-IZO) anode film show better current density-voltage-luminance characteristics than that of OLED devices with the commercial crystalline-ITO (c-ITO) anode film. It can be explained that very flat surface roughness and high work function of a-IZO anode film lead to more efficient hole injection by reduction of interface barrier height between anode and organic layers. This suggests that a-IZO film is a promising anode materials substituting conventional c-ITO anode in OLED devices.

키워드

참고문헌

  1. K. Ishibashi, K. Hirata, and N. Hosokawa, "Mass spectrometric ion analysis in the sputtering of oxide targets", J.Vac. Sci. Technol. A, 10, pp. 1718-1722, 1992. https://doi.org/10.1116/1.577776
  2. K. Tominaga, T. Ueda, T. Ao, M. Kataoka, and I. Mori, "TO films prepared by facing target sputtering system", Thin Solid Films, 281-282, pp. 194-197, 1996. https://doi.org/10.1016/0040-6090(96)08611-7
  3. Y. Hoshi, H. Kato, and K. Funatsu, "ITO films deposited by facing target sputtering", J. mat. sci., 18, pp. 359-362, 2003.
  4. N. Taga, M. Maekawa, Y. Shigesato, I. Yasui, M. Kamei and T. E. Haynes, "Deposition of Heteroepitaxial $In_{2}O_{3}$ Thin Films by Molecular Beam Epitaxy", Jpn. J. Appl.Phys. 37, pp. 6524-6529, 1998. https://doi.org/10.1143/JJAP.37.6524
  5. D. C. Paine, B. Yaglioglu, "Amorphous IZO-based transparent thin film transistors", Thin solid films 516, pp. 5894-5898, 2007.
  6. H.-K. Kim, D.-G. Kim, K.-S. Lee, M. S. Huh, S. H. Jeong, and K. I. Kim, "The Application of Anode Material (ITAZO) and Hole Transportation Material (NiO) in Organic Solar Cell", 1. Photonics and Optoelectronics 2009, pp. 1-4, 2005.
  7. 노경현, 최문구, 박승환, 주홍렬, 정창오, 정규하, 박장우, "비정질 투명전도막$In_{2}O_{3}:Zn$의 전기적 광학적 특성", 한국광학회지, 13, pp. 455-459, 2002.
  8. C. Nunes de Carvalho, A. M. Botelho do Rego, A. Amaral, P. Brogueira and G. Lavareda, "Effect of substrate temperature on the surface structure, composition and morphology of indium-tin oxide films", Surface and Coatings Technology, 124, pp. 70-75, 2000. https://doi.org/10.1016/S0257-8972(99)00619-2
  9. 박영란, 김용성, "In 도핑된 ZnO 박막의 투명 전극과 유기 발광 다이오드 특성", 한국세라믹학회지, 44, pp. 303-307, 2007.
  10. 조한나, 리유에롱, 민수련, 정지원, "Indium Zinc Oxide 박막 특성에 대한 O2 농도와 열처리 온도의 영 향", 한국공업화학학회지, 17, pp. 644-647, 2006.
  11. J. J. Ho and C. Y. Chen, "ower effects in Indium-Zinc Oxide Thin Films for OLEDs on Flexible Application", J. Electrochem. Soc., 152, pp. G57-G61, 2005. https://doi.org/10.1149/1.1829431
  12. Y. S. Jung, J. Y. Seo, D. K. Lee and D. Y. Jeon, "Influence of DC magnetron sputtering parameters on the properties of amorphous indium zinc oxide thin film", Thin Solid Films, 445, pp. 63-71, 2003. https://doi.org/10.1016/j.tsf.2003.09.014
  13. J.-H. Bea, J.-M. Moon, and H.-K. Kim, "Electrical, Optical and Structural Properties of Indium Zinc Oxide Top Cathode Grown by Box Cathode Sputtering for Top-emitting OLEDs", The Journal of the Korean Institute of Electrical and Electronic Material Engineers, 19, pp. 442-449, 2006. https://doi.org/10.4313/JKEM.2006.19.5.442