Journal of Power Electronics

  • 제11권5호
  • /
  • Pages.719-725
  • /
  • 2011
  • /
  • 1598-2092(pISSN)
  • /
  • 2093-4718(eISSN)
전력전자학회 (The Korean Institute of Power Electronics)
권호 표지
DOI QR코드

DOI QR Code

Robust DTC Control of Doubly-Fed Induction Machines Based on Input-Output Feedback Linearization Using Recurrent Neural Networks

  • Payam, Amir Farrokh (Center of Excellence on Applied Electromagnetic Systems, University of Tehran) ;
  • Hashemnia, Mohammad Naser (Department of Electrical Engineering, Sharif University of Technology) ;
  • Fai, Jawad (Center of Excellence on Applied Electromagnetic Systems, University of Tehran)
  • 투고 : 2010.07.28
  • 발행 : 2011.09.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper describes a novel Direct Torque Control (DTC) method for adjustable speed Doubly-Fed Induction Machine (DFIM) drives which is supplied by a two-level Space Vector Modulation (SVM) voltage source inverter (DTC-SVM) in the rotor circuit. The inverter reference voltage vector is obtained by using input-output feedback linearization control and a DFIM model in the stator a-b axes reference frame with stator currents and rotor fluxes as state variables. Moreover, to make this nonlinear controller stable and robust to most varying electrical parameter uncertainties, a two layer recurrent Artificial Neural Network (ANN) is used to estimate a certain function which shows the machine lumped uncertainty. The overall system stability is proved by the Lyapunov theorem. It is shown that the torque and flux tracking errors as well as the updated weights of the ANN are uniformly ultimately bounded. Finally, effectiveness of the proposed control approach is shown by computer simulation results.

키워드

참고문헌

  1. R. Datta and V. Ranganathan, "Variable-Speed Wind Power Generation Using a Doubly Fed Wound Rotor Induction Machine: A Comparison with Alternative Schemes," IEEE Power Engineering Review, Vol. 22, No. 7, pp. 52-55, Jul. 2002.
  2. D. Casrdei, F. Profumo, G. Serra and A.Tani, "FOC and DTC: two viable schemes for induction motors torque control," IEEE Trans. Power Electron., Vol.17, No. 5, pp. 779-787, Sep. 2002. https://doi.org/10.1109/TPEL.2002.802183
  3. B. Hopfensperger, J. Atkinson, and R.A.Lakin, "Stator-flux-oriented control of a doubly-fed induction machine with and without position encoder," IEE Proc. Electr. Power Appl, Vol. 147, No. 4, pp. 241-250, Jul. 2000. https://doi.org/10.1049/ip-epa:20000442
  4. L. Xu, and W. Cheng, "Torque and reactive power control of a doublyfed wound rotor induction machine by position sensorless scheme," IEEE Trans, Ind. Appl, Vol. 31, No. 3, pp. 636-642, May/Jun. 1995. https://doi.org/10.1109/28.382126
  5. R.Pena, J. C.Clare, and G. M .Asher, "Doubly fed induction generator using back to back PWM convertor and its application to variable-speed wind energy generator," IEE Proc. Electr. Power. Appl, Vol. A3, No. 3, pp. 231-241, Nov. 1996.
  6. Z. Wang, F. Wang, M. Zong, and F. Zhang, "A new control strategy by combining direct torque control with vector control for doubly fed machines," in Proc.IEEE-Powercon'2004, Singapore, pp. 792-795, Nov. 2004.
  7. S .Peresada, A. Tilli, and A. Tonielli, "Robust active-reactive power control of a doubly-fed induction generator," in Proc.IEEE-IECON'98, Aachen, Germany, pp. 1621-1625, Sep. 1998.
  8. S. Peresada, A. Tilli, and A. Tonielli, "Indirect stator flux-oriented output feedback control of a doubly fed induction machine," IEEE Trans. Control Sys., Vol. 11, No. 6, pp. 875-888, Nov. 2003. https://doi.org/10.1109/TCST.2003.819590
  9. O. A. Mohammed, Z. Liu, and S. Liu, "Stator power factor adjustable direct torque control of doubly-fed induction machines," in PROC. ICEMDC, pp. 572-578, May 2005.
  10. Z. Liu, O. A. Mohammed, S. Liu, "A novel direct torque control of doubly-fed induction generator used for variable speed wind power generation", in PROC PES, pp. 1-6, Jun. 2007.
  11. R. Geetha, T. Thyagarajn, V. Subrshmanam, and R. Shilila, "Torque ripple minimization in Doubly Fed Induction Machine used in wind mills with Artificial Neural Network," Journal of Theoretical and Applied Information Technology, Vol. 7, No. 1, pp. 53-57, 2009.
  12. F. Bonnet, P. E. Vidal, and M. Pietrzak-David, "Direct torque control of doubly fed induction machine," Bulletin of the polish academy of sciences technical sciences, Vol. 54, No. 3, pp. 307-314, Oct. 2006.
  13. Marino R, Tomei P, Nonlinear Control Design-Geometric, Adaptive and Robust. Englewood Cliff: VJ: Prentice-Hall, 1995.
  14. I. Kanellakopoulos, P. V. Kokotovic and A. S. Morse, "Systematic Design of Adaptive Controllers for Feedback Linearizable Systems," IEEE Trans. Automat. Contr., Vol. 36, pp. 1241-1253, Nov. 1991. https://doi.org/10.1109/9.100933
  15. M. Krstic, I. Kannellakopoulos, and P. Kokotovic, Nonlinear and Adaptive Control Design, John Willey&Sons, 1995.
  16. R. D. Lorenz, T. A. Lipo, and D. W. Novotny, "Motion Control with Induction Motors," in PROC IEEE, Vol. 82, pp. 1215-1240, Aug. 1994. https://doi.org/10.1109/5.301685
  17. O. Omidvar, D.L. Elliott, Neural Systems for Control. Academic Press, 1997.
  18. A.M.A Amin, "Neural network-based tracking control system for slipenergy recovery drives," in PROC IEEE, Vol. 3, pp. 1247-1252, Jul. 1997.
  19. N. Sadegh, "Nonlinear identification and control via neural networks in Control Systems with Inexact Dynamic Models," ASME Winter Annual. Meeting, Vol. 33, 1991.
  20. F. Kwan, L. Lewis, "Robust Backstepping Control of Nonlinear Systems Using Neural Networks," IEEE Trans. Systems Man and Cybernetics- Part A: Systems and Humans, Vol. 30, No. 6, pp. 753-766, Nov. 2000. https://doi.org/10.1109/3468.895898
  21. S. Peresada, A.Tilli and A.Tonielli, "Robust Output Feedback Control of a Doubly Fed Induction Machine," in PROC IEEE, Vol. 3, pp. 1348- 1354, Nov./Dec. 1999.
  22. A .Farrokh Payam, "An Adaptive Input-Output Feedback Linearization Controller for Doubly-Fed Induction Machine Drives," Serbian Journal of Electrical Engineering, Vol. 5, No. 1, pp. 139-154, May 2008. https://doi.org/10.2298/SJEE0801139P
  23. B. Mirzaeian Dehkordi, A. Farrokh Payam, M. N. Hashemnia, and S. Sul, "Design of an adaptive back stepping controller for doubly-fed induction machine drives," Journal of Power Electronics, Vol. 9, No. 3, pp.343-353, May 2009.
  24. X. Lie, P. Cartwright, "Direct active and reactive power control of DFIG for wind energy generation", IEEE Trans Energy Convers., Vol. 21, No. 3, pp. 750-758, Sep. 2006. https://doi.org/10.1109/TEC.2006.875472
  25. T. Noguchi, H. Tomiki, S. Kondo, and I. Takahashi, "Direct power control of PWM converter without power-source voltage sensors," IEEE Trans on Ind. Appl., Vol. 34, No. 3, pp. 473–479, May/Jun. 1998. https://doi.org/10.1109/28.673716

피인용 문헌

  1. A Six-Phase CRIM Driving CVT using Blend Modified Recurrent Gegenbauer OPNN Control vol.16, pp.4, 2016, https://doi.org/10.6113/JPE.2016.16.4.1438
  2. PMSM Servo Drive for V-Belt Continuously Variable Transmission System Using Hybrid Recurrent Chebyshev NN Control System vol.10, pp.1, 2015, https://doi.org/10.5370/JEET.2015.10.1.408
  3. A PMSM Driven Electric Scooter System with a V-Belt Continuously Variable Transmission Using a Novel Hybrid Modified Recurrent Legendre Neural Network Control vol.14, pp.5, 2014, https://doi.org/10.6113/JPE.2014.14.5.1008
  4. An adaptive control scheme for doubly fed induction generators – wind turbine implementation vol.26, pp.2, 2014, https://doi.org/10.1080/0952813X.2013.813977
  5. A Backstepping Control of LSM Drive Systems Using Adaptive Modified Recurrent Laguerre OPNNUO vol.16, pp.2, 2016, https://doi.org/10.6113/JPE.2016.16.2.598
  6. Adaptive fuzzy vector control for a doubly-fed induction motor vol.151, 2015, https://doi.org/10.1016/j.neucom.2014.10.026
  7. Novel Modified Elman Neural Network Control for PMSG System Based on Wind Turbine Emulator vol.2013, 2013, https://doi.org/10.1155/2013/753756