DOI QR코드

DOI QR Code

Fabrication and Characteristics of Micro Platform for Micro Gas Sensor with Low Power Consumption

마이크로 가스센서의 저전력 구동을 위한 마이크로 플랫폼의 제작과 특성

  • Received : 2011.07.28
  • Accepted : 2011.09.16
  • Published : 2011.09.30

Abstract

A Micro platform for micro gas sensor consisted of micro heater, insulator, and sensing electrode on 2 ${\mu}m$ thick $SiN_x$ membrane. Three types of micro platforms were designed and fabricated with membrane sizes. Total size of micro platform was 2.6 mm by 2.6 mm. Measured power consumptions were 28 mW, 28 mW, and 32.5 mW for Type 1, Type 2, and Type 3. At this moment, temperatures of membranes on the platforms were $295^{\circ}C$, $297^{\circ}C$, and $296^{\circ}C$, respectively. Fabricated micro platform considered appropriate to apply for low power consumption micro gas sensor. Micro gas sensors were prepared by the sequence that $SnO_2$ nanopowder pastes were dropped on membrane of Type 1 platforms, dried in oven, heat-treated with micro heaters in platforms. One of the micro gas sensors was tested for gas response to 1157 ppm, 578 ppm, and 231 ppm of methane and 1.68 ppm, 0.84 ppm, and 0.42 ppm of $NO_2$.

Keywords

References

  1. J. Cerda Belmonte, J. Puigcorbe, J. Arbiol, A.Vila, J.R. Morante, N. Sabate, I. Gracia, and C. Cane, "Hightemperature low-power performing micromachined suspended micro-hotplate for gas sensing applications", Sensors and Actuators B., vol. 114, pp. 826-835, 2006. https://doi.org/10.1016/j.snb.2005.07.057
  2. Jean-Baptiste Sanchez, Franck Berger, Michel Fromm, and Marie-Helene Nadal, "A selective gas detection micro-device for monitoring the volatile organic compounds pollution", Sensors and Actuators B., vol. 119, pp. 227-233, 2006. https://doi.org/10.1016/j.snb.2005.12.028
  3. B. H. Weiller, J. D. Fowler, D. Briand, N. F. de Rooij, C. J. Taylor, M. L. Homer, and M. A. Ryan, "Space applications of micro hot plate chemical sensors", IMCS The 11th International Meeting on Chemical Sensors, Brescia, Italy, 2006.
  4. D. Briand, S. Colin, J. Courbat, S. Raible, J. Kappler, N.F. de Rooij, "Metal oxide gas sensors on polyimide micro-hotplates", IMCS The 11th International Meeting on Chemical Sensors, Brescia, Italy, 2006.
  5. Kwang-Yong Choi, Joon-Shik Park, Kwang-Bum Park, Hyun Jae Kim, Hyo-Derk Park, and Seong-Dong Kim, "Low power micro-gas sensors using mixed $SnO_2$ nanoparticles and MWCNTs to detect $NO_2, NH_3$, and xylene gases for ubiquitous sensor network applications", Sensors and Actuators B., vol. 150, pp. 65-72, 2010. https://doi.org/10.1016/j.snb.2010.07.041

Cited by

  1. A Simple Plane-Shaped Micro Stator Using Silicon Substrate Mold and Enamel Coil vol.22, pp.5, 2013, https://doi.org/10.5369/JSST.2013.22.5.333