한국철도학회논문집 (Journal of the Korean Society for Railway)

  • 제14권4호
  • /
  • Pages.320-326
  • /
  • 2011
  • /
  • 1738-6225(pISSN)
  • /
  • 2288-2235(eISSN)
한국철도학회 (The Korean Society for Railway)
권호 표지
DOI QR코드

DOI QR Code

Lamb파의 시간-반전과정 및 이미지기법을 이용한 손상탐지

Structural Damage Detection by Using the Time-Reversal Process of Lamb Waves and the Imaging Method

  • 전용주 (인하대학교 공과대학 기계공학과) ;
  • 이우식 (인하대학교 공과대학 기계공학과)
  • 투고 : 2011.03.17
  • 심사 : 2011.05.16
  • 발행 : 2011.08.26
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 Lamb파에 대한 시간-반전과정과 이미지기법을 기반으로 하여 기준 데이터를 사용하지 않는 구조물 건전성 모니터링(SHM) 기술을 제안하였다. 제안된 기술이 갖는 주요 세가지 특징은 다음과 같다: (1) 제안된 기술에서는 귀환신호를 직접 손상진단에 사용하기 때문에 귀환신호와 초기 입력신호의 차이로부터 손상신호를 구할 필요가 없다; (2) 기존의 기술에서 널리 사용되는 형상비교법을 사용하지 않고 귀환신호에서 얻는 비시간 정보를 활용하는 이미지기법을 사용하였다; (3) 손상 이미지를 보다 뚜렷하게 얻기 위하여 이미지에 대한 개선된 수학적 정의를 사용하였다. 본 연구에서 제안한 SHM기술은 손상을 평판의 몇몇 위치에 부가한 경우에 대한 손상탐지 실험을 수행함으로써 검증하였다.

This paper proposes a baseline-free SHM technique in which the time-reversal process of Lamb waves and the imaging method are used. The proposed SHM technique has three distinct features when compared with the authors' previously proposed one: (1) It use the reconstructed signal for damage diagnosis, without need to extract the damage signal as the difference between reconstructed signal and initial input signal; (2) It use the imaging method based on the time-offlight information from the reconstructed signal, instead of using a pattern comparison method; (3) In order to make the damage image more clear, the modified mathematical definition of damage image in a pixel is used. The proposed SHM technique is evaluated through the damage detection experiment for an aluminum plate with damage at different locations.

키워드

참고문헌

  1. R.J. Hansen, D.L. Hall, S.K. Kurtz (1995) A new approach to the challenge of machinery prognostics, Journal of Engineering Gas Turbines and Power, 117, pp. 320-325. https://doi.org/10.1115/1.2814097
  2. D. Montalvao, N.M.M. Maia, A.M.R. Ribeiro (2006) A review of vibration-based structural health monitoring with special emphasis on composite materials, The Shock and Vibration, 38(4), pp. 295-324. https://doi.org/10.1177/0583102406065898
  3. A. Raghavan, C.E.S. Cesnick (2007) Review of guided-wave structural health monitoring, The Shock and Vibration, 32(2), pp. 91-114.
  4. H.W. Park, H. Sohn, K.H. Law, C.R. Farrar (2007) Time reversal active sensing for health monitoring of a composite plate, Journal of Sound and Vibration, 302, pp. 50-66. https://doi.org/10.1016/j.jsv.2006.10.044
  5. H. Sohn, H.W. Park, K.H. Law, C.R. Farrar (2007) Damage detection in composite plates by using an enhanced time reversal method, Journal of Aerospace Engineering, 20(3), pp. 141-151. https://doi.org/10.1061/(ASCE)0893-1321(2007)20:3(141)
  6. H. Sohn, H.W. Park, K.H. Law, C.R. Farrar (2007) Combination of time reversal process and a comsecutive outlier analysis for base-line free damage diagnosis, Journal of Intelligent Material Systems and Structures, 18(7), pp. 335-346.
  7. M. Fink (1992) Time reversal of ultrasonic fields-part E: basic principles, IEEE Transactions on Ultrasonics Ferroeletrics and Frequency Control, 39(5), pp. 555-566. https://doi.org/10.1109/58.156174
  8. C.H. Wang, J.T. Rose, F.K. Chang (1998) A synthetic timereversal imaging method for structural health monitoring, Smart Materials & Structures, 13, pp. 415-423.
  9. I.A. Viktorov (1967) Rayleigh and lamb waves: physical theory and applications, Plenum Press, NY.
  10. H. Ko, U. Lee (2009) A guided wave-based structural damage detection method for structural health monitoring, Journal of the Korean Society for Railway, 12(3), pp. 412-419.
  11. U. Lee, J. Choi (2010) Structural damage diagnosis method by using the time-reversal property of guided waves, Journal of the Korean Society for Precision Engineering, 27(6), pp. 64-74.
  12. G.B. Santoni, L. Yu, B. Xu, V. Giurgiutiu (2007) Lamb wavemode tuning of piezoelectric wafer active sensors for structural health monitoring, Journal of Vibration and Acoustics, 129, pp. 752-762. https://doi.org/10.1115/1.2748469
  13. J.B. Ihn, F.K. Chang (2008) Pitch-catch active sensing methods in structural health monitoring for aircraft structures, Structural Health Monitoring, 7(1), pp. 5-15. https://doi.org/10.1177/1475921707081979
  14. S.R. Anton (2008) Baseline-free self-powered structural health monitoring, MS Thesis, Virginia Polytechnic Institute and State University.
  15. H. Sohn, G. Park, J.R. Wait, N.P. Limback, C.R. Farrar (2004) Wavelet-based active sensing for delamination detection in composite structures, Smart Materials and Structures, 13, pp. 153-160. https://doi.org/10.1088/0964-1726/13/1/017
  16. G. Strang, T. Nguyen (1997) Wavelets and filter banks, Wellesley-Cambridge Press, Wellesley, MA.