초록
본 연구에서는 GFRP/Mg 단일겹치기 접착 조인트의 접착부재 형상에 따른 응력집중 완화효과를 평가하였다. 이를 위해 6가지 서로 다른 접착부재의 끝단부 형상에 대해 비선형 유한요소 해석을 수행하였다. 또한, 서로 다른 끝단부 형상에 따른 접착층내 응력의 3차원 구 배를 고찰하였다. 해석결과, 접착부재가 순방향 테이퍼를 갖고 필렛이 없는 모델 (모델 2번)이 가장 높은 응력 값을 보였다. 반면, 사각형 접착부재에 필렛이 부과된 모델 (모델 3번)과 역방향 테이퍼를 갖고 필렛이 부과된 모델 (모델 5번)은 기준모델에 비해 65.7%와 65.6%의 응력저감 효과가 있었다.
In this study, the stress reduction effect was evaluated for GFRP/Mg single lap bonded joints according to six different adherend shapes. Six different types of the single lap joint specimen were modeled and assessed using geometrically nonlinear finite element analysis. Moreover, three dimensional effect of stress distribution for the different adherend shapes was investigated. From the analysis, the dissimilar single lap bonded joint with the normal tapering and without the spew fillet (model 2) showed the highest stress values. In contrast, the peel stress values of both the square ended adherends with the spew fillet (model 3) and the reverse tapered adherends with the spew fillet (model 5) were 65.8% and 65.5% lower than the reference model.