DOI QR코드

DOI QR Code

건물의 외주부 존에 대한 동적 부하모델 이용 피크냉방부하 저감효과 분석

Evaluation on Reducing Peak Cooling Load Based on Dynamic Load Model of Building Perimeter Zones

  • 이경호 (한국에너지기술연구원 태양열지열센터) ;
  • Lee, Kyoung-Ho (Solar Thermal and Geothermal Center, Korea Institute of Energy Research) ;
  • Brau, James E. (School of Mechanical Engineering, Purdue University)
  • 투고 : 2011.06.07
  • 심사 : 2011.07.01
  • 발행 : 2011.08.30

초록

In this paper, inverse building modeling was applied to building perimeter zones which have different window orientation. Two test zones of east-facing and west-facing zones in ERS(Energy Resource Station) building, which is representative of small commercial building, was used to test performance of cooling load calculation and peak cooling load reduction. The dynamic thermal load model for the east and west zone was validated using measured data for the zones and then it was used to investigate the effect of peak cooling load reduction by adjustment of indoor cooling temperature set points during on-peak time period. For the east zone, the peak load can be reduced to about 60% of the peak load for conventional control even without any precooling. For the west zone, PLR is nearly independent of the start of the on-peak period until a start time of 1pm. Furthermore, PLR has a small dependence on the precooling duration. Without any precooling, the peak cooling load can be reduced to about 35% of the peak load associated with conventional control.

키워드

참고문헌

  1. Lee,K.-H. and Braun,J.E.., Model-based Demand-Limiting Control of Building Thermal Mass, Building and Environment Vol.43, No.10, 2008, pp.1633-1646. https://doi.org/10.1016/j.buildenv.2007.10.009
  2. Price,B.A.and Smith,T.F., Description of the Iowa Energy Center Energy Resource Station: Facility Update III,Technical Report ME-TFS-00-001, The University of Iowa, 2000
  3. Lee,K.-H.and Braun,J.E., Evaluation of Methods for Determining Demand-Limiting Set point Trajectories in Buildings Using Short-Term Measurements, Building and Environment, Vol.43, No.10, 2008, p.1769-1783 https://doi.org/10.1016/j.buildenv.2007.11.003
  4. Wikipedia, mathematical mode
  5. Seem,J.E., Beckman,W.A., Mitchell,W., Transfer Functions for Efficient Calculations of Multi Dimensional Heat Transfer, Journal of Heat Transfer-Transactions of the ASME, 1989, Vol. 111, No.1, pp.5-12 https://doi.org/10.1115/1.3250659
  6. Chaturvedi,N., Braun,J.E., An Inverse Grey-Box Model for Transient Building Load Prediction, International Journal of HVAC&R Research, 2002, Vol.8, No.1, pp.73-100 https://doi.org/10.1080/10789669.2002.10391290
  7. NREG(Nonlinear regression) analysis, Fortran library
  8. University of Wisconsin at Madison, TRNSYS 15.0 Manual