DOI QR코드

DOI QR Code

Development and Implementation of a Skill Transfer System for a Self-Tapping Screw-Tightening Operation

  • Matsumoto, Toshiyuki (Department of Industrial and Systems Engineering, Aoyama Gakuin University) ;
  • Doyo, Daisuke (Faculty of Business Administration, Kanagawa University) ;
  • Shida, Keisuke (Department of Management and Information Systems Science, Nagaoka University of Technology) ;
  • Kanazawa, Takashi (Department of Administration Engineering, Keio University)
  • Received : 2010.10.06
  • Accepted : 2011.06.27
  • Published : 2011.09.01

Abstract

Self-tapping screws have some operational peculiarities. In spite of their economical advantage that requires no prior tapping operation, a weakness of self-tapping screw-tightening operations is that screws can easily be tightened at a non-right angle, thus resulting in an improper tightening strength. Increases in outsourced workers have reduced labor costs, but the accompanying high worker fluidity means that new workers are more frequently introduced into factories. It is necessary to train new workers for self-tapping screw-tightening operations, which occupies a considerable portion of ordinary assembly works. The purpose of this study is to develop and implement a skill transfer system for the operation. This study (1) proposes a set of characteristic values for evaluating the quality of the operation and develops a device that can measure these values; (2) proposes criteria for evaluating the resultant quality of the tightening; and (3) develops a skill training system for better work performance. Firstly, sets of characteristic values for evaluating the quality of the operation, namely, torque, vertical pressure forces and horizontal vibration forces, are proposed. A device that can measure these values is developed. Secondly, criteria for evaluating the resultant quality of the tightening are identified, involving tightening torque, maximum vertical pressure and timing, vibration area during the processing and tightening period, and work angle. By using such parameters, workers with the proper aptitude can be identified. Thirdly, a skill training system for the operation is developed. It consists of screwdriver operation training and screw-tightening training with feedback information about the results of the operation. Finally, the validity of the training system is experimentally verified using new operators and actual workers.

Keywords

References

  1. Andrews, D. M., Potvin, J. R., Calder, I. C., Cort, J. A., Agnew, M., and Stephens, A. (2008), Acceptable peak forces and impulses during manual hose insertions in the automobile industry, International Journal of Industrial Ergonomics, 38(2), 193-201. https://doi.org/10.1016/j.ergon.2007.02.001
  2. Brookham, R. L., Wong, J. M., and Dickerson, C. R. (2010), A Upper limb posture and submaximal hand tasks influence shoulder muscle activity, International Journal of Industrial Ergonomics, 40(3), 337-344. https://doi.org/10.1016/j.ergon.2009.11.006
  3. Drury, C. G. (1980), Handles for Manual Materials Handling, Applied Ergonomics, 11(1), 35-42. https://doi.org/10.1016/0003-6870(80)90120-9
  4. Hatamura, Y. (2006), How to transfer of technology (in Japanese), ISBN 9784061498709, Kodansha Ltd, Tokyo Japan.
  5. Johnson, S. L. (1988a), Evaluation of Powered Screwdriver Design Characteristics, Human Factors, 30(1), 61-69. https://doi.org/10.1177/001872088803000106
  6. Johnson, S. L. (1988b), Powered Screwdriver Design and Use: Tool, Task, and Operator Effects, International Journal of Industrial Ergonomics, 2(3), 183-191. https://doi.org/10.1016/0169-8141(88)90019-4
  7. Joshi, A., Guttenberg, R., Leu, M., and Murray, S. (2008), Modeling of the hand-arm system for impact loading in shear fastener installation, International Journal of Industrial Ergonomics, 38(9-10), 715-725. https://doi.org/10.1016/j.ergon.2007.10.012
  8. Lin, J.-H., Maikala, R. V., McGorry, R., and Brunette, C. (2010), NIRS application in evaluating threadedfastener driving assembly tasks, International Journal of Industrial Ergonomics, 40(2), 146-152. https://doi.org/10.1016/j.ergon.2008.12.005
  9. Marras, W. S. and Lavender, S. A. (1991), The effects of method of use, tool design, and roof height on trunk muscle activities during underground scaling bar use, Ergonomics, 34(2), 221-232. https://doi.org/10.1080/00140139108967308
  10. Matsumoto, T., Tashiro, H. and Kanazawa, T. (1993), Proposal of a Set of New Indices for Evaluating the Quality of Screwdriver Operation and a Measurement Device (in Japanese), Journal of the Society of Plant Engineers Japan, 4(4), 12-20.
  11. Matsumoto, T. and Kanazawa, T. (1999), A Fundamental Study on the Effect of Driving Angle on the Work Quality of Self-tapping Screw Operation (in Japanese), Journal of the Society of Plant Engineers Japan, 11(2), 4-9.
  12. Matsumoto, T. (2000a), A Fundamental Study on the Effect of Resultant Angle on the Work Quality of Self-tapping Screw Operation (in Japanese), Journal of the Society of Plant Engineers Japan, 11(3), 3-10.
  13. Matsumoto, T., Shida, K., and Kanazawa T. (2000b), The Establishment of Work Performance Criteria for Self-threading Screw Tightening Operation (in Japanese), The Japanese Journal of Ergonomics, 36(4), 181-190. https://doi.org/10.5100/jje.36.181
  14. Matsumoto, T., Shida, K., and Kanazawa, T. (2000c), A Survey for Self-threading Screw Tightening Operation in an Actual Factory and a Proposal for Effective Method (in Japanese), IE Review, 41(3), 58-67.
  15. Matsumoto, T. (2001), The Relationship between Work Angle and Resulting Torque of Self-threading Screw Tightening Operation (in Japanese), Journal of the Society of Plant Engineers Japan, 12(4), 115-120.
  16. Matsumoto, T., Shida, K., and Kanazawa, T. (2002a), An Evaluation of the Effect of Work Direction and Location on the Work Quality and Efficiency of Self-threading Screw Tightening Operation (in Japanese), Journal of Japan Industrial Management Association, 52(6), 332-343.
  17. Matsumoto, T., Doyo, D., Ichikizaki, O., and Kanazawa, T. (2002b), A Fundamental Study on the Thrust Loading for a Driver in the Self-threading Screw Tightening Operation (in Japanese), The Japanese Journal of Ergonomics, 38(3), 143-151. https://doi.org/10.5100/jje.38.143
  18. Matsumoto, T., Sakashita, M., and Kanazawa, T. (2002c), Relationship between Tightening Torque and Quality Indices of Self-threading Screw Tightening Operation (in Japanese), Journal of the Society of Plant Engineers Japan, 14(1), 1-8.
  19. Matsumoto, T., Doyo, D., Shida, K., and Kanazawa, T. (2003), Application of a Training System for Selfthreading Screw Tightening Operation to Factory Workers who Have Different Skill Level (in Japanese), Journal of the Society of Plant Engineers Japan, 14(4), 256-264.
  20. Matsumoto, T., Doyo, D., Shida, K., and Kanazawa, T. (2007), Development of Skill Transfer System for Self-Tapping Screw Tightening Operation, Proceedings of the 8th Asia Pacific Industrial Engineering and Management System and 2007 Chinese Institute of Industrial Engineering Conference, Paper ID 180.
  21. Morozumi, M. (1990), Mathematical Analysis of Screws (in Japanese), The Japan Research Institute for Screw Threads and Fasteners, Tokyo Japan.
  22. Mukhopadhyay, P., O'Sullivan, L., and Gallwey, T. J. (2007), Estimating upper limb discomfort level due to intermittent isometric pronation torque with various combinations of elbow angles, forearm rotation angles, force and frequency with upper arm at $90^{\circ}$ abduction, International Journal of Industrial Ergonomics, 37(4), 313-325. https://doi.org/10.1016/j.ergon.2006.11.007
  23. Shida, K., Matsumoto, T., and Kanazawa, T. (2001), Development of a Training System for Self-threading Screw Tightening Operation (in Japanese), The Japanese Journal of Ergonomics, 37(1), 1-10. https://doi.org/10.5100/jje.37.1
  24. Yamada, M. and Kato, H. (2007), Technology and skill legend in the illustration (in Japanese), ISBN 978-4-495-57811-4, Doubunkan Ltd, Tokyo Japan.
  25. Yamamoto, A. (1992), Theory and Calculation of Screw Tightening (in Japanese), Yokendo Lltd, Tokyo Japan.
  26. Yamamoto, T. and Mori, K. (2002), A Study on the Skill Transfer Strategy by Cognitive Science Methods (in Japanese), Journal of Japan Industrial Management Association, 53(2), 161-169.
  27. Xu, X. S., Welcome, D. E., McDowell, T. W., Warren, C., and Dong, R. G. (2009), An investigation on characteristics of the vibration transmitted to wrist and elbow in the operation of impact wrenches, International Journal of Industrial Ergonomics, 39(1), 174-184. https://doi.org/10.1016/j.ergon.2008.05.006

Cited by

  1. A Fundamental Study for Creating 3D CG Animation of an Assembly Work vol.11, pp.2, 2011, https://doi.org/10.7232/iems.2012.11.2.188