Abstract
As the building structures are higher and bigger, the high-performance steels of high strength, toughness, and low yield ratio had been required and developed. In this paper the behavior of the moment connection with bolted web and high strength steel was studied by using the finite-element analysis computer program of ABAQUS. The analysis model is based on the test results and the same cyclic load history was applied at the FE(Finite Element) model until it failed in the test. Through the FEA, several indicators hardly measured from the test were acquired. These indicators related to stress and strain were selected from three plastic rotation stages: 0.003 rad, 0.03 rad, and final failure rotation. Specifically, at the final failure stage, the strain indicators producing the full plastic behavior were suggested as a mechanical property for steel.
건축물이 크고 높아질수록 고강도 강재의 필요성이 부각 되었고 이러한 요구에 따라 강도와 항복비가 개선된 성능을 가진 강재들이 개발되고 있다. 본 연구에서는 고강도강재를 사용한 웨트볼트 접합방식을 가지는 모멘트접합부의 거동을 ABAQUS를 사용한 유한요소해석을 통하여 파악하였다. 해석모델은 이미 수행되어진 실험체를 대상으로 하였으며 파괴시까지의 반복하중을 해석모델에 가력하였다. 유한요소해석결과 실제실험으로는 얻기 힘든 여러 가지의 반응지수들을 구하였다. 이러한 지수들은 응력과 변형에 관계한 값으로 소성회전각이 0.003rad, 0.03rad 그리고 파괴시까지 3단계에서 구하였다. 특히 파괴단계에서 일정한 값을 가지는 변형지수는 충분한 소성거동을 하는 접합부의 강재에 요구되어지는 기계적 성질로 제시하였다.