DOI QR코드

DOI QR Code

Condensing Characteristics of Pin-finned Surfaces on Pool Boiling in FC-72

풀비등에서 소형 사각기둥핀 배열형상에 따른 FC-72의 응축특성

  • 강상우 (한국과학기술연구원 에너지메카닉스센터) ;
  • 김서영 (한국과학기술연구원 에너지메카닉스센터)
  • Received : 2011.02.25
  • Accepted : 2011.06.09
  • Published : 2011.07.10

Abstract

As the electronic industry rapidly develops, the heat flux from state-of-the-art electronics increases up to $10^6\;W/m^2$. For this reason, the development of a new cooling technology for high heat flux applications is strongly required. Recently, some cooling technologies using boiling and condensation of working fluid are being adopted to overcome such a technical barrier. In the present study, a smooth boiling surface ($14{\times}14\;mm^2$) was immersed in FC-72 and its vapor was condensed by four different types of condensation surfaces ($30{\times}30\;mm^2$ base). The condensing surfaces were composed of a smooth surface and $1{\times}1\;mm^2$ pin-finned surfaces of 2 mm height with 0.3, 0.5 and 1 mm array spacing. Boiling and condensing characteristics were investigated in detail on their combinations of boiling and condensing surfaces. For a smooth boiling surface the results obtained showed that the pin-finned condensing surface with 1 mm array spacing yielded the best performance and the smooth condensation surface did the worst. Furthermore hysteresis phenomena could be reduced by using enhanced condensing surfaces.

Keywords

References

  1. Baker, E., 1973, Liquid immersion cooling of small electronic devices, Microelectronics and reliability, Vol. 12, pp. 163-173. https://doi.org/10.1016/0026-2714(73)90462-9
  2. Oktay, S., 1982, Departure from natural convective( DNC) in low temperature boiling heat transfer encountered in cooling micro-electronic LSI devices, Proc. 7 th Int. Heat Transfer Conference, Munich, Germany, Vol. 4, pp. 113-118.
  3. Marto, P. J. and Lepere, Lt. V. J., 1982, Pool boiling heat transfer from enhanced surface to dielectric fluid, ASME J. Heat Transfer, Vol. 104, pp, 292-299. https://doi.org/10.1115/1.3245086
  4. Bar-Cohen, A. and Schweitzer, H., 1985, Thermosyphon boiling in vertical channels, ASME J. Heat Transfer, Vol. 107, pp. 772-778. https://doi.org/10.1115/1.3247503
  5. Anderson, T. M. and Mudawwar, I., 1988, Microelectronic cooling by enhanced pool boiling of dielectric fluorocarbon liquid, ASME Proc. of the 1988 Natural Heat Transfer conference, Vol. 1, pp. 551-560.
  6. Maddoz, D. E. and Mudawwar, I., 1988, Single and two-phase convective heat transfer from smooth and enhanced microelectronic heat source in rectangular channel, ASME Proc. Of the 1988 Natural Heat Transfer conference, Vol. 1, pp. 533-541.
  7. Rainey, K. N., You, S. M. and Lee, S., 2003, Effect of pressure, subcooling, and dissolved gas on pool boiling heat transfer from microporous, square pin-finned surface in FC-72, Int. J. Heat and Mass Transfer, Vol. 46, pp. 23-35. https://doi.org/10.1016/S0017-9310(02)00257-0
  8. Pioro, I. L., Rohsenow, W. and Doerffer, S. S., 2004, Nucleate pool-boiling heat transfer. I: review of parametric effects of boiling surface, Int. J. Heat and Mass Transfer, Vol. 47, pp. 5033-5044. https://doi.org/10.1016/j.ijheatmasstransfer.2004.06.019
  9. Rainey, K. N. and You, S. M., 2000, Pool boiling heat transfer from plain and microporous square pin, finned surfaces in saturated FC- 72, J. Heat Transfer, Vol. 122, No. 3, pp. 509-516. https://doi.org/10.1115/1.1288708
  10. Abuaf, N., Black, S. H. and Staub, F. W., 1985, Pool boiling performance of finned surfaces in R-113, Int. J. of Heat and Fluid Flow, Vol. 6, No. 1, pp. 23-30. https://doi.org/10.1016/0142-727X(85)90028-1
  11. Guglielmini, G., Misale, M. and Schenone, C., 1996, Experiments on pool boiling of a dielectric fluid on extended surfaces, Int. Communications in Heat and Mass Transfer, Vol. 23, No. 4, pp. 451-462. https://doi.org/10.1016/0735-1933(96)00030-9
  12. McGillis, W. R., Carey, V. P. Fitch, J. S., and Hamburgen, W. R., 1991, Pool boiling enhancement techniques for water at low pressure, Proc., Seventh Annual IEEE Semiconductor Thermal Measurement and Management Symposium, IEEE, New York, pp. 64- 72.