한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)

  • 제22권7호
  • /
  • Pages.683-693
  • /
  • 2011
  • /
  • 1226-3133(pISSN)
  • /
  • 2288-226X(eISSN)
한국전자파학회 (The Korean Institute of Electromagnetic Engineering and Science)
권호 표지
DOI QR코드

DOI QR Code

광대역 특성을 갖는 집중 소자를 이용한 고출력 증폭기용 마이크로파 바이어스-티의 설계

Design of a Microwave Bias-Tee Using Lumped Elements with a Wideband Characteristic for a High Power Amplifier

  • Oh, Hyun-Seok (Department of Radio Science & Engineering, Chungnam National University) ;
  • Jeong, Hae-Chang (Department of Radio Science & Engineering, Chungnam National University) ;
  • Yeom, Kyung-Whan (Department of Radio Science & Engineering, Chungnam National University)
  • 발행 : 2011.07.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문에서는 고출력 증폭기의 바이어스를 위한 대전류 마이크로파 광대역 바이어스-티의 설계를 보였다. DC 블록용 커패시터는 큰 어드미턴스를 가지도록 커패시터의 병렬합을 이용하고, DC 공급 및 RF 초크용 인덕터는 광대역의 큰 임피던스를 가지는 인덕터의 직렬합을 이용하여 설계하였다. DC 블록이나 RF 초크에 사용되는 인덕터나 커패시터는 자기 공진 주파수(SRF: Self Resonance Frequency)를 가지고 있어 사용 대역이 제약된다. 이를 해결하기 위해 RF 초크에서는 저항을 추가하여 공진 주파수에서 품질 계수를 조정함으로써 해결하였다. 그리고 DC 블록에서는 별도의 품질 계수 조정없이 병렬합만으로 가능하였다. 이 결과를 이용하여 1608 칩 형태의 집중 소자들을 표면 실장 기법(surface mount)으로 PCB 패턴에 조립하여 바이어스-티를 제작하였다. 제작된 바이어스-티는 10 MHz~10 GHz에서 측정된 반사 손실이 10 dB 이하를 가지며, 입력 임피던스는 광대역에서 50 ohm 근처의 값을 만족하는 것을 확인하였다.

In this paper, a design of high current and broad-band microwave bias-tee was presented for a stable bias of a high power amplifier. An input impedance of bias-tee should be shown to 50 ohm with the wideband in order to be stably-biased the amplifier. For this design of the bias-tee, a capacitor of bias-tee for a DC block was designed with a high wide-band admittance by a parallel sum of capacitors, and a inductor for a RF choke and a DC feeding was designed with a high wide-band impedance by a series sum of inductors. As this inductor and capacitor for the sum has each SRF, band-limitation of lumped element was driven from SRF. This limitation was overcome by control of a resonance's quality factor with adding a resistor. 1608 SMD chips for design's element was mounted on the this pattern for the designed bias-tee. The fabricated bias-tee presented 10 dB of return loss and wide-band about 50 ohm input impedance at 10 MHz~10 GHz.

키워드

참고문헌

  1. TGF2023-10, 50 Watt Discrete Power GaN on Sic HEMT, Triquint Semiconductor, Nov. 2009.
  2. J. R. Andrews, "Broadband coaxial bias-tees", Picosecond Pulse Labs, Application Note AN-1e, Nov. 2000.
  3. C. Baylis, L. Dunleavy, and W. Clausen, "Design of bias tees for a pulsed-RF test system using accurate component models", Microwave Journal, Horizon House Publication, vo. 49, no. 10, Oct. 2006.
  4. G. W. Johnson, Wideband Bias Tee, Nov. 2008. available: http://web.mac.com/gwj/Site/Bias_Tee.html
  5. E. Cullens, K. Vanhille, and Z. Popovic, "Miniature bias-tee networks integrated in micro-coaxial lines", Proceeding of the 40th European Microwave Conference, pp. 413-416, Sep. 2010.
  6. Advanced Design System(ADS) 2009, Agilent Technology, 2009.
  7. 염경환, 능동초고주파회로 설계 입문(개정판), 홍릉과학출판사, 2008년 6월.
  8. G. Gonzalez, Microwave Transistor Amplifiers Analysis and Design, 2nd Edition, Prentice Hall Inc., pp. 212-293, 1997.
  9. Murata Manufacturing Co. Ltd., Chip Monolithic Ceramic Capacitors, Sep. 2009.
  10. H. Otto, Noise Reduction Techniques in Electronic Systems, 2nd Edition, John Wiley & Sons, pp. 137-158, 1988.
  11. Coilcraft, Inc., Mini $Spring^{TM}$ Air Core Inductors, Document 107-1, Oct. 2008.
  12. Coilcraft, Inc., High Current Air Core Inductors, Document 625-1, Oct. 2010.
  13. Coilcraft, Inc., Square Air Core Inductors, Document 617-1, Oct. 2009.
  14. FBMH3225HM601NT, Rectangular Ferrite Beads (High Current FB Series M Type), Taiyo Yuden, 2011.
  15. Spectrum Software, Creating Ferrite Bead Models, 2011. available at: www.spwctrum-soft.com/news/winter2011/ferritebead.stm

피인용 문헌

  1. Design of a Planar Wideband Microwave Bias-Tee Using Lumped Elements vol.24, pp.4, 2013, https://doi.org/10.5515/KJKIEES.2013.24.4.384