Abstract
The TPMS(Tire Pressure Monitoring System) is an electronic system designed to display the air pressure inside the pneumatic tires and report real-time tire-pressure information to the driver of the vehicle, either via a gange, a pictogram display, or a simple low-pressure warning light. Although the data measured by TPMS sensor is transmitted to internal signal processer in a vehicle through wireless communication, the receiver may suffers from various interferences such as amateur radio station, RFID(Radio-Frequency IDentification) for controlling container, RKE(Remote Keyless Entry) signal, and so on. In this paper, we consider beamforming technology to suppress various high-power interference signals for the TPMS wireless communications. Also, we propose the proper data structure and antenna arrangement for the beamformer inside the vehicle. The performance for the interference suppression is illustrated by computer simulation example.
TPMS(Tire Pressure Monitoring System)는 차량의 주행 또는 정차시 타이어의 압력 또는 온도 등에 따른 이상 유무를 측정하여 수신기의 표시장치에 해당 상황을 나타내주도록 설계된 안전 보조 시스템이다. TPMS의 센서부에서 측정한 데이터를 자동차 내부의 신호처리부로 무선통신을 이용하여 전송하는데, 통신 시에 다양한 간섭으로 인한 통신 장애가 발생할 수 있다. 대표적인 TPMS 간섭으로 아마추어 무선국, 컨테이너 관리용 RFID(Radio-Frequency IDentification), RKE(Remote Keyless Entry) 신호 등을 들 수 있다. 이러한 다양하면서도 높은 전력을 가지는 간섭들을 제거하기 위하여 본 논문에서는 빔형성(Beamforming) 기술을 고려한다. 이에 따른 데이터 구조 및 빔형성기에 알맞는 차량내부의 안테나 배치 등을 제안한다. 컴퓨터 시뮬레이션을 통하여 본 논문에서 제안된 기술의 간섭제거 성능을 확인 할 것이다.