한국주조공학회지 (Journal of Korea Foundry Society)

  • 제31권3호
  • /
  • Pages.137-144
  • /
  • 2011
  • /
  • 1598-706X(pISSN)
  • /
  • 2288-8381(eISSN)
한국주조공학회 (Korea Foundry Society)
권호 표지
DOI QR코드

DOI QR Code

회주철 판형 주조품의 공정 셀 수와 칠 깊이에 미치는 두께, 기본 원소 및 접종제의 영향

Effects of Thickness, Base Element and Inoculants on the Number of Eutectic Cells and Chill Depth of Gray Cast Iron Plate Casting

  • 김태형 (영남대학교 신소재공학부) ;
  • 오정혁 (영남대학교 신소재공학부) ;
  • 권해욱 (영남대학교 신소재공학부)
  • Kim, Tae-Hyeong (Dept. of Mat. Sci. & Eng., Graduate School, Yeungnam Univ.) ;
  • Oh, Jung-Hyuck (Dept. of Mat. Sci. & Eng., Graduate School, Yeungnam Univ.) ;
  • Kwon, Hae-Wook (Dept. of Mat. Sci. & Eng., Graduate School, Yeungnam Univ.)
  • 투고 : 2011.05.10
  • 심사 : 2011.06.14
  • 발행 : 2011.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The effects of thickness, base element and inoculants on the number of eutectic cells and chill depth of gray cast iron plate casting were investigated. Meanwhile the number of eutectic cells increased by inoculation, chill depth decreased. The former decreased and the latter increased by holding the melt at the temperature range between 1,450 and $1,500^{\circ}C$. The former was more for the thinner casting with the thickness of 5 mm than the other. The result of thermal analysis coincided well with the change of macrostructure. The former increased and the latter decreased with the increased contents of carbon, silicon and the silicon content by inoculation. The former decreased and the latter increased with increased manganese content. The performance of the Superseed Extra was the best among 5 inoculants.

키워드

참고문헌

  1. H. I. Park and M. H. Kim : J. of KFS, "A consideration for the Alloy Design of High Strength Grast Cast Irons.", 8(2) (1988) 174-184
  2. C. R. Loper, Jr. : Foundry, "Inoculation of Cast Iron", Sept., (1996) 42-48.
  3. C. R. Loper, Jr. : J. of KFS, "Nucleation of Graphite in Cast Irons", 17(4) (1997) 327-337
  4. J. F. Wallace : Trans. AFS, "Effects of Minor Elements on the Structure of Cast Irons", 83 (1975) 363-377
  5. J. F. Wallace and R. D. Maier : Proc. of AFS-CMI Conf., "How Inoculation Works", Feb, (1979) 41-75
  6. T. Skaland et. al. : Met. Trans. "A Model for the Graphite Formation in Ductile Cast Iron, Part I, Inoculation Mechanisms", 24 (1993) 2321-2333 https://doi.org/10.1007/BF02648605
  7. T. Mizoguchi, J. H. Perepezko and C. R. Loper, Jr. : Trans. AFS, "Nucleation during the Solidification of Cast Irons", 95 (1997)
  8. H. Horie : J. of JFS, "Effects of Fading on Mechanical Properties and Sulfide Shape on Rare Earth Element Added Flake Graphite Cast Iron", J. of JFES, 74(9) (2002) 584-589
  9. H. S. Lee and H. Kwon : J. of KFS, "Effect and Fading Behavior of Inoculants in the Cast Iron Melt", 23(3) (2003) 122-129
  10. T. Kanno : J. of JFES, "Prediction of Chilling Tendency in Cast Iron Using Three Cups Thermal Analysis System", 70(11) (1998) 773-778
  11. W. S. Nam and H. Kwon : J. of KFS, "Effect of S, Ce and Bi on the Performance of 1.0wt%Ba-Fe-Si Inoculant in Gray Cast Iron Melts", 24(5) (2004) 295-303
  12. D. R. Askeland, P. K. Trojan and R. A. Flinn : Trans. AFS, " Investigation of Mechanism of Dross Formation in Ductile Iron", 78 (1970) 125-132