Journal of Power Electronics

  • 제11권4호
  • /
  • Pages.471-478
  • /
  • 2011
  • /
  • 1598-2092(pISSN)
  • /
  • 2093-4718(eISSN)
전력전자학회 (The Korean Institute of Power Electronics)
권호 표지
DOI QR코드

DOI QR Code

Development of a Unified Research Platform for Plug-In Hybrid Electrical Vehicle Integration Analysis Utilizing the Power Hardware-in-the-Loop Concept

  • Edrington, Chris S. (Center for Advanced Power Systems, Florida State University) ;
  • Vodyakho, Oleg (Center for Advanced Power Systems, Florida State University) ;
  • Hacker, Brian A. (Center for Advanced Power Systems, Florida State University)
  • 투고 : 2011.01.01
  • 발행 : 2011.07.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper addresses the establishment of a kVA-range plug-in hybrid electrical vehicle (PHEV) integration test platform and associated issues. Advancements in battery and power electronic technology, hybrid vehicles are becoming increasingly dependent on the electrical energy provided by the batteries. Minimal or no support by the internal combustion engine may result in the vehicle being occasionally unable to recharge the batteries during highly dynamic driving that occurs in urban areas. The inability to sustain its own energy source creates a situation where the vehicle must connect to the electrical grid in order to recharge its batteries. The effects of a large penetration of electric vehicles connected into the grid are still relatively unknown. This paper presents a novel methodology that will be utilized to study the effects of PHEV charging at the sub-transmission level. The proposed test platform utilizes the power hardware-in-the-loop (PHIL) concept in conjunction with high-fidelity PHEV energy system simulation models. The battery, in particular, is simulated utilizing a real-time digital simulator ($RTDS^{TM}$) which generates appropriate control commands to a power electronics-based voltage amplifier that interfaces via a LC-LC-type filter to a power grid. In addition, the PHEV impact is evaluated via another power electronic converter controlled through $dSPACE^{TM}$, a rapid control systems prototyping software.

키워드

참고문헌

  1. O. Tremblay, L. Dessaint, and A. Dekkiche, "A Generic battery model for the dynamic simulation of hybrid electric vehicles", in Proc. IEEE Vehicle Power and Propulsion Conference (VPPC-2007), pp. 284-289, Sep. 2007.
  2. M. Majima, K. Hanafusa, Y. Oka, G. Tanaka, H. Yoshida, E. Yagasaki, and T. Tada, "Development of 1 kWh (300 Ah) class lithium-ion battery," J. Power Sources, Vol. 68, No. 2, pp. 448-450, Oct. 1997. https://doi.org/10.1016/S0378-7753(96)02582-7
  3. T. Horiba, K. Hironaka, T. Matsumura, T. Kai, M. Koseki, and Y. Muranaka, "Manganese type lithium ion battery for pure and hybrid electric vehicles," J. Power Sources, Vol. 97-98, pp. 719-721, Jul. 2001. https://doi.org/10.1016/S0378-7753(01)00599-7
  4. M. Chen and G.A. Rincon-Mora, "Accurate electrical battery model capable of predicting runtime and I-V performance," IEEE Trans. Energy Convers., Vol. 21, No. 2, pp. 504-511, Jun. 2006. https://doi.org/10.1109/TEC.2006.874229
  5. P. Rong and M. Pedram, "An analytical model for predicting the remaining battery capacity of lithium-ion batteries," IEEE Trans. Very Large Scale Integr. (VLSI) Syst., Vol. 14, No. 5, pp. 441-451, May 2006. https://doi.org/10.1109/TVLSI.2006.876094
  6. P. Mauracher and E. Karden, "Dynamic modeling of lead/acid batteries using impedance spectroscopy for parameter identification," Journal of Power Sources, Vol. 67, No. 1-2, pp 69-84, Jul./Aug. 1997. https://doi.org/10.1016/S0378-7753(97)02498-1
  7. M. Steurer, C. S. Edrington, M. Sloderbeck, Ren Wei and J. Langston, "A megawatt-scale power hardware-in-the-loop simulation setup for motor drives," IEEE Trans. Ind. Electron., Vol. 57, No. 4, pp. 1254-1260, Apr. 2010. https://doi.org/10.1109/TIE.2009.2036639
  8. X. Wu, S. Lentijo, A. Deshmuk, A. Monti, and F. Ponci, "Design and implementation of a power-hardware-in-the-loop interface: a nonlinear load case study," in Proc. IEEE Applied Power Electronics Conference and Exposition (APEC 2005), Vol. 2, pp. 1332-1338, Mar. 2005.
  9. A. Gebregergis and P. Pillay, "Implementation of fuel cell emulation on DSP and dSPACE controllers in the design of power electronic converters," IEEE Trans. Ind. Appl., Vol. 46, No. 1, pp. 285-294, Jan./Feb. 2010. https://doi.org/10.1109/TIA.2009.2036676
  10. O. Vodyakho, C. Edrington, M. Steurer, and F. Fleming, "Synchronization of Three-phase converters and virtual microgrid implementation utilizing the power-hardware-in-the-loop concept," in Proc. IEEE Applied Power Electronics Conference and Exposition (APEC 2010), pp.216-222. Feb, 2010.
  11. ABB Automation Technology Products. ControlIT AC 800PEC Software Guide - Software Version 3.5. ABB, 2004.
  12. IP Reference-Carrier-Modulator Rev 3, ABB, 2004.
  13. Z. Ullah, B. Burford, S. Dillip, "Fast intelligent battery charging: neuralfuzzy approach," IEEE Aerospace and Electronic Systems Magazine, Vol. 11, No. 6, pp. 26-34, Jun. 1996. https://doi.org/10.1109/62.500207

피인용 문헌

  1. MRAS Based Speed Estimator for Sensorless Vector Control of a Linear Induction Motor with Improved Adaptation Mechanisms vol.15, pp.5, 2015, https://doi.org/10.6113/JPE.2015.15.5.1274
  2. Accurate Modeling of Prismatic Type High Current Lithium-Iron-Phosophate (LiFePO4) Battery for Automotive Applications vol.04, pp.06, 2012, https://doi.org/10.4236/epe.2012.46061