DOI QR코드

DOI QR Code

Torso Pattern Design for Korean Middle-Aged Women using 3D Human Body Scan Data

차원 인체 스캔 데이터를 활용한 한국 중년여성 토르소 원형 설계

  • Kim, Hye-Jin (Department of Clothing & Fashion, Graduate School, Yeungnam University) ;
  • Park, Soon-Jee (School of Textiles, Yeungnam University)
  • 김혜진 (영남대학교 대학원 의류패션학과) ;
  • 박순지 (영남대학교 섬유패션학부)
  • Received : 2011.02.25
  • Accepted : 2011.04.03
  • Published : 2011.08.31

Abstract

The purpose of this study is to provide Torso pattern for Korean middle-aged women using 3D human body scan data. 155 women in their 40's or 50's were measured by Martin's anthropometry. Merging the data of 914 middle aged women provided by Korean agency for technology and standards, total of 1,069 subjects' data were analyzed. For data analysis, ANOVA, factor analysis and cluster analysis were done using SPSS PC+. And representative subject of each cluster was selected and they participated in 3D scanning and Torso pattern suggested for middle-aged women Torso pattern which investing the amount of ease according to each group for diffuse front interscye 30%, armscye circumference 30%, back interscye 40% using 3D human body scan data. The results of this study are as follows. Firstly, as a result of the factor analysis, the first factor was 'obesity index of body', The second factor was 'verticality size of body', The third factor was 'verticality length of upper bodice', The fourth factor was 'drop value to represent silhouette', and the fifth factor was 'physique of upper bodice'. And, middle-aged women type were classified 3 types according to the cluster analysis. Type 1(Y-type) was the long upper Torso with wide shoulder. Type 2(H-type) was flat-body type with comparatively thin upper bodice and thin lower bodice. And type 3(A-type) was the obese type with comparatively thin upper bodice and fat lower bodice. Secondly, using CAD program, point filtering was performed and approximated surface model was made. It used that generated surface smoothing corrected for abnormally extruded points and scattered points based on the curvature information. And 3D surfaces were flatted onto the plane by the internal tools of CAD program. Difference ratios of outline length and area between 3D curves and 2D plane were 0.42% and 0.54%, respectively. Third, wearing test by the sensory evaluation showed that distinct difference almost every category. The movement functionality test shows that, in all the tests which reveal significant differences, especially, 'comparison pattern A' experienced inconvenience to neck width and neck depth.

Keywords

References

  1. 김혜경, 김순자. (1995). 중년여성의 의복구성을 위한 상반신 체형분류. 한국의류학회지, 19(6), 1027-1039.
  2. 남윤자, 최경미. (2002). 3차원 인체측정 기술의 의류산업에의 활용. 섬유기술과 산업, 6(3/4), 218-227.
  3. 박순지, 김혜진. (2010). 밀착의형 3차원 파라메트릭 모델을 활용한 상반신 원형의 다트 및 절개분리선 설정에 관한 연구. 한국의류산업학회지, 12(4), 467-476. https://doi.org/10.5805/KSCI.2010.12.4.467
  4. 박순지, 조영한, 박정환, 김재현, 서추연, 김태규, 이희정. (2007). CAD system을 활용한 의복 패턴용 3차원 인체 스캔데이터 표면 평면화. 한국정밀공학회 2007년도 추계학술대회논문집, 303-304.
  5. 박순지, 최신애. (2008). 3차원 인체 스캔 데이터를 활용한 Hip-Hugger 의류용 벨트 패턴 설계. 한국의류산업학회지, 10(5), 652-659.
  6. 윤미경, 남윤자, 최경미. (2007). 3차원 인체 형상을 이용한 20대 여성의 하반신 전개패턴에 관한 연구. 한국의류학회지, 31(5), 692-704. https://doi.org/10.5850/JKSCT.2007.31.5.692
  7. 임지영. (2008). 40.50대 중년여성의 기성복 구매 및 치수만족도 조사. 한국의류산업학회지, 10(3), 335-341.
  8. 산업자원부 기술표준원. (2005). 제 5차 한국인 인체치수조사 자료 - 직접측정에 의한 인체치수 통계.
  9. 최혜선, 이경미. (1995). 중년여성 기성복의 치수체계에 관한 연구. 대한가정학회지, 33(1), 187-201.
  10. 三吉滿智子. (2002). 복장조형학 이론편 (옹혜정 역). 서울: 교학연구사. (원저 2000 출판)
  11. 中擇 愈. (1999). 의복과 체형(나미향 역). 서울: 예학사. (원저 1996 출판)
  12. 朴淳志. (2003). 人體の三次元スキャニングデ-タから上半身原型の設計のための理論開發. 日本文化女子大學 博士學位論文.
  13. 吳艶君. (2009). 3D 체표 기능별 여유량을 고려한 여성 바지 패턴 설계. 충남대학교 대학원 석사학위논문.
  14. Park, S., & Miyoshi, M. (2003). Development of theory and auto CAD program for designing the individual bodice pattern from 3D scanning data of human body. Journal of ARAHE, 10(4), 216-225.
  15. Wang, C.C.L., Smith S.S-F., & Yuen, M.M.F. (2002). Surface flattening based on energy model. Computer-Aided Design, 34, 823-833. https://doi.org/10.1016/S0010-4485(01)00150-6
  16. Watanabe, K., Matsuyama, Y., & Furumatsu, Y. (2000). Three dimensional analysis of upper torso of elderly japanese women for clothing design. Journal of Japan Society of Home Economics, 51(11), 1045-1055.

Cited by

  1. Design of 3D compression upper wear based on skin deformation during arm abduction vol.24, pp.5, 2015, https://doi.org/10.5934/kjhe.2015.24.5.687
  2. Functional Underwear Development for Elderly Woman from 3D Body Model applying PCM treatment vol.18, pp.4, 2016, https://doi.org/10.5805/SFTI.2016.18.4.457
  3. Technical Design of Tight Upper Sportswear based on 3D Scanning Technology and Stretch Property of Knitted Fabric vol.14, pp.2, 2012, https://doi.org/10.5805/KSCI.2012.14.2.277
  4. Extracting Method of the Space Shapes between Clothing and the Human Body - Focusing on the Mold Bra for Small-breasted Women - vol.23, pp.4, 2014, https://doi.org/10.5934/kjhe.2014.23.4.653