Journal of Korea Technical Association of The Pulp and Paper Industry (펄프종이기술)

Korea Technical Association of the Pulp and Paper Industry (한국펄프종이공학회)
권호 표지

Development of Modified Printing Hanji Using Alternative Plant Fibers (II) - Printability of Printing Hanji Made of Alternative Plant Fibers -

대체 식물 자원을 이용한 인쇄용 개량한지의 개발 연구(제 2보) - 대체 식물 자원 섬유를 이용한 개량 한지의 인쇄 특성 연구 -

  • 이지영 (경상대학교 임산공학과(IALS)) ;
  • 서정민 (무림P&P(주) 연구소) ;
  • 김철환 (경상대학교 임산공학과(IALS)) ;
  • 엄태진 (경북대학교 임산공학과) ;
  • 박현진 (경상대학교 임산공학과(IALS)) ;
  • 김성호 (경상대학교 임산공학과(IALS)) ;
  • 김경철 (경상대학교 임산공학과(IALS))
  • Received : 2011.04.26
  • Accepted : 2011.06.12
  • Published : 2011.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study was carried out to develop the printing Hanji made of mixed raw materials with mulberry bast fibers and alternative plant fibers such as bamboo, soybean stalks, pepper stalk and sea tangle. All alternative plant fibers were produced by the kraft pulping method with 2 stages of bleaching, and used to prepare the modified traditional paper, Hanji for printing purpose. Printing quality of modified Hanji was analyzed by measuring area and Formcircle of halftones and comparing a letter shape printed on paper. The Hanji made of 60% of mulberry bast fibers and 40% of bamboo bleached kraft pulp showed the best printing quality with the smallest area and the largest Formcircle in all modified Hanji. Through the image analysis of form circles of the letters printed on the Hanji, it could also be confirmed that the best printability of the modified Hanji was made using bamboo fibers.

Keywords

References

  1. 임강혁, 최태호, 닥나무 인피섬유의 절단장이 펄프화 및 한지의 물성에 미치는 영향(제1보) - 국내 닥 백피의 특성, 펄프종이기술 40(2): 57-64 (2008).
  2. 조남석, 최태호, 민두식, 닥나무류를 이용한 새로운 한지 개발에 관한 연구(제2보), 펄프종이기술 24(3): 19-26 (1992).
  3. 강진하, 박성철, 미생물 셀룰로오스를 이용한 한지의 인쇄적성 개선에 관한 연구, 펄프종이기술 40(2): 23-29 (2008).
  4. Kang, J.H., Seo, S.M. and Park, S.C., Studies on the Printability of Hanji by Sizing and Calendering, J. Korea TAPPI 37(5): 70-77 (2005).
  5. Seo, S.M., Kang, J.H. and Lim, H.A., Studies on the printability Improvement of Hanji by Surface Sizing with Mixed Agents, J. Korea TAPPI 38(5): 38-46 (2006).