Journal of the Korea Institute of Information and Communication Engineering (한국정보통신학회논문지)

The Korea Institute of Information and Commucation Engineering (한국정보통신학회)
권호 표지
DOI QR코드

DOI QR Code

Design of Differential Voltage-to-Frequency Converter Using Current Conveyor Circuit

전류 컨베어 회로를 이용한 차동전압-주파수 변환기의 설계

  • Received : 2010.12.02
  • Accepted : 2011.01.08
  • Published : 2011.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes the differential voltage-to-frequency converter which is realized current conveyor circuits. The output frequency of the differential voltage-to-frequency converter is proportional to the difference of two input voltages. The designed circuit is simulated by HSPICE. The range of input voltage difference is from several volts to several milli-volts. From the simulation results the error is less than from -1.9% to +1.8% compared to the calculated values.

이 논문에서는 전류 컨베이어 회로를 이용하여 입력 전압의 차에 비례하는 주파수 신호를 생성하는 회로를 설계하였다. 설계된 회로는 HSPICE를 이용하여 회로의 동작을 분석하였으며, 입력 전압 차는 수V에서 수mV 단위까지 변화시키면서 출력 주파수를 시뮬레이션하였다. 회로의 시뮬레이션 결과 이론적인 계산값과 비교하였을 때 에러는 -1.9%에서 +1.8% 이내였다.

Keywords

References

  1. Sedra, A. and Smith K. C., "A Second Generation Current Conveyor and Its Applications", IEEE Trans. Circuit Theory, vol.17, pp.132-134, 1970. https://doi.org/10.1109/TCT.1970.1083067
  2. Minaei & Tuskog, "New Current-mode Currentcontrolled Universial Filter with Single Input and Thress Outputs", JEE vol.88, no.3, pp.333-337, 2001.
  3. Khan I.A. and Maheswari, S., "Simple First Order All-pass Sections Using a Single CCII", Internatioal Journal of Elec. vol.87, pp.303-306, 2000. https://doi.org/10.1080/002072100132200
  4. P.Kumar and K. Pal, "Universla Biquadratic Filter Using a Single Current Conveyor", J. of Active and Passive Elec. Dev. vol.3, pp.7-16, 2008.
  5. S. Rana and K. Pal, "Current Conveyor Simulation Circuits Using Operational Amplifiers", Jour. of Phys. Sciences, vol.11, pp.124-132, 2007.