The effects of turbulence models on the numerical analysis of CSTR

난류모델이 완전혼합반응조 수치해석에 미치는 영향 연구

  • Published : 2011.06.15

Abstract

The usages of CFD (Computational Fluid Dynamics) which is simulating turbulent flows in CSTRs (Complete Stirrer Tank Reactors) have been reported. Considering model strategies and simulation techniques, this paper is focused on the turbulence models. The results of this study would suggest multiple reference frameworks relevant to rotational flow simulation. Specifically, the analysis of turbulence dissipation rates referred to this study would solve the relevant environmental engineering problem and would be beneficial to the CFD in CSTRs using mechanical mixer.

Keywords

References

  1. 명국현 (1998) 난류모델링의 문제점 및 개선방안, 98년도 유체공학분문 학술강연회 강연집, 대한기계학회, pp.97-106.
  2. 명국현 (2002) CFD 입문, 문운당.
  3. 박노석 (2002) 물 동역학을 이용한 급속혼화조내 난류장 분석 및 수리학적 상사성의 Jar-test적용에 관한 연구, 박사학위논문, 한국과학기술원.
  4. 박노석, 박현오, 김성수, 차민환, 김사동(2010). 유공벽을 이용한 우류식 염소접촉조 사류 저감 방안 연구, 2010 공동 추계학술발표회 논문집, 대한상하수도학회, pp.29-30.
  5. 박한영, 조용, 김영준 (2010) 전산유체 따라잡기, 흥룡과학출판사
  6. 서용권, 강상모, 서이수 (2005) 전산유체역학, 동아대학교 출판부.
  7. 신병록, 장근식, 조강래 (1997) 전산유체역학 -기초와 응용-, 대영사.
  8. 이상형, 박노석, 박희경, 신항식, 황응주(2000) 3-D 전산유체를 이용한 급속 혼화에서의 난류 유동장 해석, 대한토목학회논문집, 대한토목학회, 제 20권 제 1-B호, pp. 139-146
  9. (주)태성앤스트 홈페이지. (http://www.anflux.com)
  10. ANSYS, Inc. (2007). ANSYS CFX Training. Training manual.
  11. Bridgeman, J., Jefferson, B., and Parsons, S.A. (2010) The development and application of CFD models for water treatment flocculators, Advances in Engineering Software, 41, pp.99-109. https://doi.org/10.1016/j.advengsoft.2008.12.007
  12. Camp, T. R., and Stein, P. C. (1943) Velocity Gradients and Internal Work in Fluid Motion, Journal of Boston Sco. of Civ. Eng, 30(10), 10, pp.210-237.
  13. CFD on-line. (http://www.cfd-online.com)
  14. Luo, C. (1997) Distribution of velocities and velocity gradients in mixing and flocculation vessels: comparison between LDV data and CFD predictions, Ph.D. thesis, New Jersey Institute of Technology.
  15. Perry, R. H., and Chilton, C. H. (1973) Chemical engineer's handbook, (5th edition), McGraw-Hill, New York