DOI QR코드

DOI QR Code

Study on Isothermal Crystallization Behavior and Surface Properties of Non-Oriented PLA Film with Annealing Temperature

어닐링 온도에 따른 무배향 PLA 필름의 등온결정화 거동과 표면물성에 관한 연구

  • Kim, Jihye (Department of Chemical Engineering, Sungkyunkwan University) ;
  • Kim, Moon-Sun (Bio/Nano-Fusion Material Research Center, Sungkyunkwan University) ;
  • Kim, Byung-Woo (Department of Chemical Engineering, Sungkyunkwan University)
  • 김지혜 (성균관대학교 화학공학과) ;
  • 김문선 (성균관대학교 바이오/나노융합재료연구단) ;
  • 김병우 (성균관대학교 화학공학과)
  • Published : 2011.10.01

Abstract

In the study, annealing temperature was optimized by comparing with avrami crystallization rate and constant (k) using non-oriented PLA film as a base film. Crystallization rate constant of PLA film was 1.64, 1.68, and 1.26 at $120^{\circ}C$, $130^{\circ}C$, and $140^{\circ}C$, respectively. Annealing temperature was mainly affected on the surface properties such as rougnness (Ra) and kinetic friction coefficient (${\mu}_k$). Roughness of PLA film was 0.006 ${\mu}m$ at $80^{\circ}C$ and increased to 0.009 ${\mu}m$ 0.015 ${\mu}m$, 0.027 ${\mu}m$, and 0.029 ${\mu}m$ at $110^{\circ}C$, $120^{\circ}C$, $130^{\circ}C$ and $140^{\circ}C$, respectively. Kinetic friction coefficient decreased 0.45 to 0.43, 0.33, 0.31, 0.27 as annealing temperature was at $80^{\circ}C$, $110^{\circ}C$, $120^{\circ}C$, $130^{\circ}C$, and $140^{\circ}C$, respectivly. In addition, rate constant (k) was 0.58, 0.46, and 0.39 with adding 1 wt%, 3 wt%, and 5 wt% talc, respectively.

본 연구에서는 무배향 PLA 필름의 어닐링(annealing) 단계를 통하여 온도별 PLA 필름의 avrami 결정화 속도식을 도출하고 결정화 속도상수(k)를 비교함으로써 최적화된 어닐링 온도를 제안하였다. 120, 130, $140^{\circ}C$ 온도에서 결정화된 필름의 결정화 속도상수(k)는 각각 1.64, 1.68, 1.26이었다. 필름표면에 대한 어닐링은 필름의 표면조도와 동마찰계수에 영향을 주는데 80, 110, 120, 130, $140^{\circ}C$의 온도조건에서 표면조도(Ra)는 각각 0.006, 0.009, 0.015, 0.027, 0.029 ${\mu}m$로 높아졌고 동마찰계수(${\mu}_k$)는 0.45, 0.43, 0.33, 0.31, 0.27로 낮아졌다. 탈크를 1, 3, 5 wt%씩 첨가하는 경우 PLA 필름의 결정화 속도상수(k)는 0.58, 0.46, 0.39로 낮아졌다.

Keywords

References

  1. Yoon, C. S. and Ji, D. S., "Preparation of PLA/PEG Bolock Copolymer via Melt Blend," Text. Sci. Eng., 43(5), 235-244(2006).
  2. Kang, K. S. and Shin, B. Y., "Modification of PLA Irradiation of Beam in the Presence of Functional Monomer: Rheological and Thermal Properties," Korean Chem. Eng. Res., 46(1), 124-130(2007). https://doi.org/10.1021/ie060857q
  3. Lee, B. I., Kim, S. H. and Lee, M. S., "Preparation and Physical Properties of Biode gradible Poly(L-lactic)/Silica Composites," Text. Sci. Eng., 45(5), 269-275(2008).
  4. Li, H. and Huneault, M. A., "Effects of Nucleation and Plasticization on the Crystallization of Poly(lactic acid)," Polym., 48(23), 6855-6866(2007). https://doi.org/10.1016/j.polymer.2007.09.020
  5. Harris, A. M. and Lee, E. C., "Improving Mechanical Performance of Injection Molded PLA by Controlling Crystallinity," J. Appl. Polym. Sci., 107(4), 2246-2255(2008). https://doi.org/10.1002/app.27261
  6. Xiao, H., Yang, L., Ren, X., Jiang, T. and Yeh, T., "Kinetics and Crystal Structure of Poly(latic acid) Crystallized Nonisothermally: Effect of Plasticizer and Nucleating Agent," Polym. Compos. 1-12(2010).
  7. Yuksekkalayci, C., Yilmazer, U. and Orbey, N., "Effect of Nucleating Agent and Processing Conditions on the Mechanical, Thermal, and Ooptical Properties of Biaxially Oriented Polypropylene Films," Polym. Eng. Sci., 39(7), 1216-1222(1999). https://doi.org/10.1002/pen.11508
  8. Tsai, C. C., Wu, R. J., Cheng, H. Y., Li, S. C., Siao, Y. Y., Kong, D. C. and Jang, G. W., "Crystallinity and Dimensioal Stability of Biaxial Oriented Poly(Latic Acid) Films," Polym. Degrad. Stabil., 95, 1292-1298(2010). https://doi.org/10.1016/j.polymdegradstab.2010.02.032
  9. Gohil, R. M., "Mophology-Property Relationship in Oriented PET Film: Microstructural Reorganization during Heat Treatment," J. Appl. Polym. Sci., 52(7), 925-944(1994). https://doi.org/10.1002/app.1994.070520711
  10. Yu, L., Liu, H., Xie, F., Chen, L. and Li, X., "Effect of Annealing and Orientation on Microstructures and Mechanical Properties of Polylactic Acid," Polym. Eng. Sci., 48(4), 634-641(2008). https://doi.org/10.1002/pen.20970
  11. Kim, Y. W. and Kim, M. S., "Polyester Film," Polym. Sci., Tech., 3(3), 185-209(1992).
  12. Fakirov, S., Fischer, E. W., Hoffmann, R. and Schmidt, G. F., "Structure and Properties of Poly(ethylene terephthalate) Crystallized by Annealing in the highly Oriented State: 2. Melting Behaviour and the Mosaic Block Structure of the Crystalline Layers," Polym., 18(11), 1121-1129(1977). https://doi.org/10.1016/0032-3861(77)90105-7
  13. Rao, Y., Greener, J., Avila-Orta, C. A., Hsiao, B. S. and Blanton, T. N., "The Relationship between Microstructures and Toughness of Biaxially Oriented Semicrystalline Polyester Films," Polym., 49(10), 2507-2514(2008). https://doi.org/10.1016/j.polymer.2008.03.046
  14. Park, S. D., Todo, M. and Arakawa, K., "Effect of Annealing on the Fracture Toughness of Poly(lactic acid)," J. Mater. Sci., 39, 1113-1116(2004). https://doi.org/10.1023/B:JMSC.0000012957.02434.1e
  15. Papageorgiou, G. Z., Achilias, D. S., Bikiaris, D. N. and Karayannidis, G. P., "Crystallization Kinetics and Nucleation Activity of Filler in Polypropylene/Surface-Treated $SiO_{2}$ Nanocomposites," Thermochim. Acta, 427(1-2), 117-128(2005). https://doi.org/10.1016/j.tca.2004.09.001
  16. Lim, L. T., Auras, R. and Rubino, M., "Processing Technologies for Poly(lactic acid)," Prog. Polym. Sci., 33(8), 820-852(2008). https://doi.org/10.1016/j.progpolymsci.2008.05.004
  17. Kim, H. C., Lee, H. S., Kim, H. Y., Pak, P. K. and Lee, B. O., "Crystallization Behaviour for Poly(ethyleneterephthalate) Containing Metal and Phosphorous Compounds," Polym.(Korea), 23(1), 25-31(1999).
  18. Radhakrishnan, S. and Sonawane, P. S., "Role of Heat Transfer and Thermal Conductivity in the Crystallization Behavior of Polypropylene-Containing Additives: A Phenomenological Model," J. Appl. Polym. Sci., 89(11), 2994-2999(2003). https://doi.org/10.1002/app.12422
  19. Radhakrishnan, S., Sonawane, P. and Pawaskar, N., "Effect of Thermal Conductivity and Heat Transfer on Crystallization, Structure, and Morphology of Polypropylene Containing Different Fillers," J. Appl. Polym. Sci., 93(2), 615-623(2004). https://doi.org/10.1002/app.20462

Cited by

  1. Synthesis of PLLA-block-PMMA Copolymer and Characteristics of Biaxially Oriented PLA Film Including the Same vol.26, pp.3, 2015, https://doi.org/10.14478/ace.2014.1121
  2. Hydrogen Reduction of NiO Particles in a Single-Stage Fluidized-Bed Reactor without Sticking vol.26, pp.2, 2016, https://doi.org/10.3740/MRSK.2016.26.2.79
  3. APP 핵제를 첨가한 PLA 필름의 등온결정화 특성에 관한 연구 vol.50, pp.3, 2011, https://doi.org/10.9713/kcer.2012.50.3.582
  4. Hydrogen Reduction of a Black Nickel Oxide Ore in a Fluidized-Bed Reactor without Sticking vol.27, pp.2, 2011, https://doi.org/10.3740/mrsk.2017.27.2.63
  5. 다양한 산소 투과도를 가진 커버필름과 산소지시물질로 제작된 인쇄형 TTI vol.24, pp.2, 2011, https://doi.org/10.20909/kopast.2018.24.2.41