References
- Williams, M. C., Strakey, J. and Sudoval, W., 2006, "U.S. DOE Fossil Energy Fuel Cell Program," Journal of Power Sources, Vol. 159, pp. 1241-1247. https://doi.org/10.1016/j.jpowsour.2005.12.085
- Perry, M. L., Fuller, T. F., 2002, "A Historical Perspective of Fuel Cell Technology," Journal of Electrochemical Society, Vol. 149, pp.59-67.
- Bernay, C., Marchand, M. and Cassir, M., 2002, "Prospects of Different Fuel Cell Technologies for Vehicle Applications," Journal of Power Sources, Vol. 108, pp. 139-152. https://doi.org/10.1016/S0378-7753(02)00029-0
- Boettner, D. D., Paganelli, G., Guezennec, Y. G., Rizzoni, G, Moran, M. J., 2002, "Proton Exchange Membrane Fuel Cell System Model of Automotive Vehicle Simulation and Control," Journal of Energy Resources Technology, Vol. 124, pp. 20-27. https://doi.org/10.1115/1.1447927
- Zhao, H., Burke, A. F., 2009, "Optimization of Fuel Cell System Operation Conditions for Fuel Cell Vehicles," Journal of Power Sources, Vol. 186, pp. 408-416. https://doi.org/10.1016/j.jpowsour.2008.10.032
- Bao, C., Ouyang, M., Yi. B., 2006, "Modeling and Optimization of the Air System in Polymer Exchange Membrane Fuel Cell System," Journal of Power Sources, Vol. 156, pp. 232-243. https://doi.org/10.1016/j.jpowsour.2005.06.008
- Park, S. K., Choe, S. Y. and Choi, S. H., 2008, "Dynamic Modeling and Analysis of a Shell-and-Tube Type Gas-to-Gas Membrane Humidifier for PEM Fuel Cell Applications," International Journal of Hydrogen Energy, Vol. 33, pp. 2273-2282. https://doi.org/10.1016/j.ijhydene.2008.02.058
- Kadylak, D., Cave, P., Merida, W., 2009, "Effectiveness Correlations for Heat and Mass Transfer in Membrane Humidifiers," International Journal of Heat and Mass Transfer, Vol. 52, pp. 1504-1509. https://doi.org/10.1016/j.ijheatmasstransfer.2008.09.002
- Badami, M., Mura, M., 2010, "Theoretical Model with Experimental Validation of a Regenerative Blower for Hydrogen Recirculation in a PEM Fuel Cell System," Energy Conversion and Management, Vol. 51, pp. 553-560. https://doi.org/10.1016/j.enconman.2009.10.022
- Frano, B., 2005, PEM Fuel Cell, Elsevier, pp. 40-50.
- Lee, J. M., Choi, J. Y., Yi, J. H., Suh, I. Y., 2009, "A State of Authentication & Development of Small PCS for Fuel Cell," KIPE Summer Annual Meeting, pp. 211-213.
- Jay, T. P., Anna, G. S. and Huei Peng, 2005, Control of Fuel Cell Power Systems, Springer, pp. 17-21.
- Erbes, M. R., Gay, R. R., 1989, "GATE/CYCLE Predictions of the Off-Design Performance of Combined-Cycle Power Plant," Simulation of Thermal Energy Systems, ASME AES-Vol. 6/HTD, Vol. 124, pp. 43-51.
- Ji, S. W., Kim, T. S., 2009, "Performance Analysis of a Polymer Electrolyte Membrane Fuel Cell Coupled with Air Supply Unit," KSME Fall Annual Meeting, pp. 2523-2528.
- Jung, J. S., Lee, C. S., 1989, "Design of the Heat Dissipation Rate of Automotive Radiation," Trans. KSAE, Vol. 11, No. 5, pp. 65-75.
- Kays, W. M., London, A. L., 1984, Compact Heat Exchangers (3rd edition), Krieger Publishing Company, p. 270.
- Shin, C. H., Lee, S. H., Park, W. G. and Jang, G. L., 2006, "The Study About the Performance-Analysis of a Automotive Engine Cooling System," Trans. KSAE, Vol. 14, No. 2, pp. 39-48.