참고문헌
- Lewis, N. S. et al., 2005, "Basic Research Needs For Solar Energy Utilization," Report of the Basic Energy Sciences Workshop on Solar Energy Utilization, April, 18-21.
- Royne, A. and Dey, C. J., 2007, "Design of a jet Impingement Cooling Device for Densely Packed PV Cells Under High Concentration," Solar Energy, Vol. 81, pp. 1014-1024. https://doi.org/10.1016/j.solener.2006.11.015
- Zubi, G., Bernal-Agustin, J. L. and Fracastoro, G. V., 2009, "High Concentration Photovoltaic Systems Applying III-V Cells," Renewable and Sustainable Energy Reviews, Vol. 13, pp. 2645-2652. https://doi.org/10.1016/j.rser.2009.07.002
- Shakouri, A. and Zhang, Y., 2005, "On Chip Solid State Cooling for Integrated Circuits," J. IEEE Trans. Components and Packaging Technologies, Vol. 28, pp. 65-69. https://doi.org/10.1109/TCAPT.2005.843219
- Anderson, W. G., Tamanna, S., Sarraf, D. B., Dussinger, P. M. and Hoffman Jr., R. W., 2008, "Heat Pipe Cooling of Concentrating Photovoltaic (CPV) Systems," 6th IECEC, July, 28-30, 2008, Cleveland, Ohio.
- Gray, A., 2007, "Modeling a Passive Cooling System for Photovoltaic Cells Under Concentration," HT2007, July, 8-12, 2007, Vancouver, Canada.
- Min, C., Nuofu, C., Xiaoli, Y., Yu, W., Yiming, B. and Xingwang, Z., 2009, "Thermal Analysis and Test for Single Concentrator Solar Cells," Journal of Semiconductors, Vol. 30, No. 4, pp. 044011. https://doi.org/10.1088/1674-4926/30/4/044011
- Sun, J., Israeli, T., Reddy, T. A., Scoles, K., Gordon, J. M. and Feuermann, 2005, "Modeling and Experimental Evaluation of Passive Heat Sinks for Miniature High-Flux Photovoltaic Concentrators," ASME J. Solar Energy Engineering, Vol. 127, pp. 138-145. https://doi.org/10.1115/1.1785799
- Zhu, L., Wang, Y. Fang Z., Sun, Y. and Huang, Q., 2010, "An Effective Heat Dissipation Method for Densely Packed Solar Cells Under High Concentrations," Solar Energy Materials & Solar Cells, Vol. 94, pp. 133-140. https://doi.org/10.1016/j.solmat.2009.08.014
- Cheknane, A., Benyoucef, B. and Chaker, A., 2007, "Performance of Concentrator Solar Cells with Passive Cooling," Semicond. Sci. Technol., Vol. 21, pp. 144-147.
- Feng, T. Q. and Xu, J. L., 2004, "An Analytical Solution of Thermal Resistance of Cubic Heat Spreaders for Electronic Cooling," Applied Thermal Engineering, Vol. 24, pp. 323-337. https://doi.org/10.1016/j.applthermaleng.2003.07.001
- Muzychka, Y. S., Culham, J. R. and Yovanovich, M. M., 2003, "Thermal Spreading Resistance of Eccentric Heat Sources on Rectangular Flux Channels," ASME J. Electronic Packaging, Vol. 125, pp. 178-185. https://doi.org/10.1115/1.1568125
- Bar-Cohen, A., Iyengar, M. and Kraus, A. D., 2003, "Design of Optimum Plate-Fin Natural Convective Heat Sinks," ASME J. Electronic Packaging, Vol. 125, pp. 208-216. https://doi.org/10.1115/1.1568361
피인용 문헌
- Development of Heating Device Using Concentrator Solar Cells vol.38, pp.1, 2014, https://doi.org/10.3795/KSME-B.2014.38.1.049
- Optical Analysis for Designing a Planar Solar Concentrator Based on Light Guide System vol.36, pp.1, 2012, https://doi.org/10.3795/KSME-A.2012.36.1.009
- Perfonnance Evaluation of Swaged- and Extruded-type Heat Sinks Used in Inverter for Solar Power Generation vol.37, pp.10, 2013, https://doi.org/10.3795/KSME-B.2013.37.10.933