초록
Software Defined Radio(SDR)에서는 ADC를 안테나 가까이에 위치시키는 것을 목표로 하고 있다. 하지만 실제 RF 대역의 신호를 ADC를 이용해 디지털화 하는 방법은 아직 어렵다. 그래서 RF 대역의 신호를 IF 대역으로 하향 변환 후 샘플링을 하는 방법이 연구되고 있다. 이런 방법의 하나로, Sub-Sampling 방식은 발진기 없이 RF 대역의 신호를 IF로 변환할 수 있는 방법이다. Sub-Sampling 방법을 이용한다면 2개 이상의 밴드를 하향 변환할 수 있지만, RF 필터의 성능으로 인해 하향 변환된 신호간에 간섭이 작용할 수 있어 성능을 저하시킨다. 본 논문에서는 time division multiplexing(TDM) 방식을 이용해 2개 이상의 신호를 시간적으로 분리시킴으로써 RF 필터의 좋지 않은 성능으로 인해 발생할 수 있는 신호간 간섭을 피할 수 있는 방법을 제안한다. 이 방식은 샘플앤홀더에서 두 신호에 대한 시간적 분리와 Sub-Sampling을 동시에 구현함으로써 하드웨어적인 큰 변화 없이 신호를 수신할 수 있다.
Software defined radio(SDR) has a goal that places the analog-to-digital converter(ADC) as near the antenna as possible. But current technique actually can't do analog-to-digital converting about RF band signals. So one method is studying that samples RF band signals to IF band. One of the ways Sub-Sampling technique can convert signals from RF band to IF band without oscillator. If Sub-Sampling technique is used, over 2 bands can convert signals from RF band to IF band. But due to the filter performance in RF band, it is possible to generate interference between signals that is converted in low frequency band. The effect degrades performance. In this paper, we propose one method that uses time division multiplexing(TDM) method as a solution to avoid interference between signals. By doing TDM and Sub-Sampling at the same time that method can get signals without large changes of structures.