참고문헌
- Hutchison, J. W., 1976, “ISA Handbook of ControlValves,” Instrument Society of America, USA.
- Skousen, P. L., 2004, “Valve Handbook,” McGraw-Hill,USA.
- Kimura, T., Tanaka, T., Fujimoto, K. and Ogawa, K.,1995, “Hydrodynamic Characteristics of a ButterflyValve-Prediction of Pressure Loss Characteristics,”ISA Transactions, Vol. 34, pp. 319-326. https://doi.org/10.1016/0019-0578(95)00024-0
- Eom, K., 1998, “Performance of Butterfly Valves as aFlow Controller,” ASME Journal of Fluids Engineering,Vol. 110, pp. 16-19.
- 윤준용, 이승준, 김승석, 2004, “공동현상 방지를 위한 버터플라이 밸브의 유동장 해석,” 유체기계저널, Vol. 7, No. 1, pp. 9-16.
- Park, J.Y. and Chung, M.K., 2006, “Study on Hydrodynamic Torque of a Butterfly Valve,” ASME Journal of Fluids Engineering, Vol. 128, pp. 190-195. https://doi.org/10.1115/1.2137348
- 신명섭, 이상일, 박경진, 윤준용, 2008, “특성함수를 이용한 펌프 제어 밸브의 편심축 결정,” 유체기계저널, Vol. 11, No. 3, pp. 43-49. https://doi.org/10.5293/KFMA.2008.11.3.043
- Yi, S.I., Shin, M.K., Shin, M.S., Yoon, J.Y. and Park,G.J., 2008, “Optimization of the eccentric check butterflyvalve considering the flow characteristics and structuralsafety,” Proc. IMechE, Part E : Journal of ProcessMechanical Engineering, Vol. 222, No. 1, pp. 63-73.
- Song, X.G., Wang, L., and Park, Y.C, 2009, “Analysisand optimization of a butterfly valve disc,” Proc. IMechE,Part E : Journal of Process Mechanical Engineering,Vol. 223, No. 2, pp. 81-89. https://doi.org/10.1243/09544089JPME236
- ISO 10631, 1994, “Metallic butterfly valves for general purposes,” International Organization for Standardization, Geneva, Switzerland.
- ANSI/ASME B16.34., 2004, “Valves-Flanged, Threaded, and Welding End,” The American Society of Mechanical Engineers, New York, USA.
- ANSI/AWWA C504, 2006, “Rubber-seated butterfly valves,” American Water Works Association, Colorado, USA.
- KS B2333, 2008, “수도용 버터플라이 밸브,” 한국표준협회.
- ISO 5028, 2008, “Industrial valves-Pressure testing ofmetallic valves,” International Organization for Standardization,Geneva, Switzerland.
- IEC 60534-4, 2006, “Industrial-process control valves,Part 4 : Inspection and routine testing,” InternationalElectrotechnical Commission, Geneva, Switzerland.
- KS B2304, 2001, “밸브의 검사 통칙,” 한국표준협회.
- ANSYS User’s Manual version 11.0, ANSYS Inc.,USA.
피인용 문헌
- Effect Analysis of Design Variables on the Disc in a Double-Eccentric Butterfly Valve vol.2014, pp.1537-744X, 2014, https://doi.org/10.1155/2014/305085
- Numerical performance and safety analyses of a retainer-type ball valve for use in a high-pressure district heating pipeline vol.231, pp.6, 2017, https://doi.org/10.1177/0954408916666303