설비공학논문집 (Korean Journal of Air-Conditioning and Refrigeration Engineering)

  • 제23권4호
  • /
  • Pages.303-311
  • /
  • 2011
  • /
  • 1229-6422(pISSN)
  • /
  • 2465-7611(eISSN)
대한설비공학회 (The Society of Air-Conditioning and Refrigerating Engineers of Korea)
권호 표지
DOI QR코드

DOI QR Code

확장표면을 적용한 액체식 제습기의 열물질 전달 모델링

Modelling of the Heat and Mass Transfer in a Liquid Desiccant Dehumidifier with Extended Surface

  • 장영수 (국민대학교 발효융합학과) ;
  • 이대영 (한국과학기술연구원 에너지메카닉스센터)
  • Chang, Y.S. (Dept. Advanced Fermentation Fusion Science and Technology, Kookmin University) ;
  • Lee, D.Y. (Energy Mechanics Center, Korea Institute of Science and Technology)
  • 투고 : 2010.09.27
  • 심사 : 2011.03.28
  • 발행 : 2011.04.10
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study presents a new idea of liquid desiccant dehumidifier with extended surface to improve the compactness. Extended surface is inserted between vertical cooling tubes, and the liquid desiccant flows down along the tube walls and the extended surface as well. Though the extended surface contributes to the increase in the mass transfer area, the effect tends to be limited because less conductive non-metallic materials need to be applied due to the high corrosiveness of liquid desiccant. To analyze the effects of the extended surface insertion, mathematical modelling and numerical integration are performed for the heat and mass transfer in the liquid desiccant dehumidifier. The results show that, though the liquid desiccant on the extended surface is heated due to the moisture absorption, the temperature can be maintained by periodic mixing at the contact points between the tube and the extended surface with the liquid desiccant stream from the tube side at a relatively low temperature. This implies the absorption heat from the extended surface side can be removed effectively by mixing, which leads to a substantial improvement of the dehumidification in the liquid desiccant dehumidifier with extended surface. When the interval of the extended surface, $p_e/L$, is less than 0.1, the dehumidification is shown to increase by more than two times compared with that without extended surface.

키워드

참고문헌

  1. Mei, L. and Dai, Y. J., 2008, A technical review on use of liquid-desiccant dehumidification for air-conditioning application., Renewable and Sustainable Energy Reviews, Vol. 12, pp. 662-689. https://doi.org/10.1016/j.rser.2006.10.006
  2. Lowenstein, A., Slayzak, S. and Kozubal, E., 2006, A zero carryover Liquid-desiccant air conditioner for solar applications, Proc. ISEC 2006, pp. 1-9.
  3. Lee, M., Chang, Y.-S. and Lee, D.-Y., 2009, Experimental study on liquid desiccant distribution characteristics at a dehumidifier with extended surface, Proceedings of the 2009 summer annual conference of SAREK, pp. 645- 649.
  4. Yin, Y. and Zhang, X., 2010, Comparative study on internally heated and adiabatic regenerators in liquid desiccant air conditioning system, Building and Environment, Vol. 45, pp. 1799-1807. https://doi.org/10.1016/j.buildenv.2010.02.008
  5. Ren, C. Q., Tu, M. and Wang, H H, 2007, An analytical model for heat and mass transfer processes in internally cooled or heated liquid desiccant-air contact units, International Journal of Heat and Mass Transfer, Vol. 50, pp. 3545-3555. https://doi.org/10.1016/j.ijheatmasstransfer.2006.12.034
  6. Liu, X. H., Chang, X. M., Xia, J. J., and Jiang, Y., 2009, Performance analysis on the internally cooled dehumidifier using liquid desiccant, Building and Environment, Vol. 44, pp. 299-308. https://doi.org/10.1016/j.buildenv.2008.03.009
  7. Yin, Y., Zhang, X., Peng, D., and Li, X., 2009, Model validation and case study on internally cooled/heated dehumidifier/regenerator of liquid desiccant systems, International Journal of Thermal Sciences, Vol. 48, pp. 1664-1671. https://doi.org/10.1016/j.ijthermalsci.2008.12.017
  8. Lee, D. - Y., Lee, J. W. and Kang, B. H., 2005, An experimental study on the effects of porous layer treatment on evaporative cooling of inclined surface, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 17, No.1, pp. 25-32.
  9. Kakac, S., Shah, R. K. and Aung W., 1987, Handbook of Single-Phase Convective Heat Transfer, John Wiley and Sons, Inc.
  10. Song, G.-E. and Lee, D.-Y., 2006, A method to reduce flow depth of a plate heat exchanger without a loss of heat transfer performance, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 18, No.2, pp. 129-136.
  11. Conde, M. R., 2004, Properties of aqueous solutions of lithium and calcium chlorides : formulations for use in air conditioning equipment design, lnt. J. Thermal Sciences, Vol. 43, pp. 367-382. https://doi.org/10.1016/j.ijthermalsci.2003.09.003
  12. Kaviany, M, 1991, Principles of heat transfer in porous media, Ch. 2 Fluid mechanics, Springer- Verlag New York Inc.