The Trapped Field Decay of YBCO Superconductor Composite with Times

시간 경과에 따른 YBCO 초전도 복합체의 포획 자기장 감쇄

  • Lee, M.S. (Department of Advanced Materials Engineering Chungbuk National University) ;
  • Jang, G.E. (Department of Advanced Materials Engineering Chungbuk National University) ;
  • Jun, B.H. (Korea Atomic Energy Research Institute Superconductor Laboratory) ;
  • Ha, D.W. (Superconductivity Lab., Korea Electrotechnology Research institute) ;
  • Son, M.H. (Superconductivity Lab., Korea Electrotechnology Research institute) ;
  • Han, Y.H. (Transmission and Distribution Lab., Korea Electric Power Research Institute) ;
  • Park, B.J. (Transmission and Distribution Lab., Korea Electric Power Research Institute)
  • Received : 2011.03.01
  • Accepted : 2011.03.21
  • Published : 2011.04.30

Abstract

We studied the trapped field properties of bulk Y-Ba-Cu-O superconductors by applying 3 T of the permanent or $Nb_3Ti$ superconducting magnet. The 28 mm circular type of YBCO bulk superconductor was prepared and then hole at the center of bulk, parallel to the c-axis, was mechanically drilled. Typical size of hole in YBCO bulk was 10 mm in diameter. In order to examine the trapped field variation in terms of different impregnated materials, a hole in YBCO bulk was filled with resin and indium respectively. The trapped field decay due to flux flow was determined in terms of time. Our preliminary result indicates the trapped field value measured on the YBCO without hole after 30 minute by applying 3 T, was 6,500 G, which is much higher than that, 4,500 G, measured on YBCO with hole. Also, we confirmed that the tendency of a trapped field decrement with time was almost the same regardless of the impregnated materials in YBCO.

Keywords

References

  1. M. Murakami, N. Sakai, T. Higuchi, S.I. Yoo, "Meltprocessed light rare earth element -Ba-Cu- O", Supercond. Sci. Technol, 9, 1015 (1996). https://doi.org/10.1088/0953-2048/9/12/001
  2. H. Ikuta, A. Mase, Y. Yanagi, M. Yoshikawa,Y. Itoh, T. Oka, U. Mizutani, "Melt-processed Sm-Ba-Cu-O superconductors trapping strong magnetic field", Supercond. Sci. Technol. 11 (1998) 1345. https://doi.org/10.1088/0953-2048/11/11/001
  3. D. Cardwell, "Processing and properties of large grain (RE)BCO", Mater. Sci. Eng. B 53 (1998) 1-10. https://doi.org/10.1016/S0921-5107(97)00293-6
  4. U. Mizutani, H. Ikuta, T. Hosokawa, H. Ishihara, K. Tazoe, T. Oka, Y. Itoh, Y. Yanagi, M. Yoshikawa, "Applications of superconducting permanent magnets driven by static and pulsed field", Supercond. Sci. Technol. 13 (2000) 836-840. https://doi.org/10.1088/0953-2048/13/6/343
  5. J. Hull, "Supeerconducting bearings", Supercond. Sci. Technol. 13 (2000) R1. https://doi.org/10.1088/0953-2048/13/2/201
  6. Y. Ren, R. Weinstein, J. Liu, R.P. Sawh, C. Foster, "Damage caused by magnetic pressure at high trapped field in quasi-permanent magnets composed of melt-textured Y-Ba-Cu-O superconductor", Physica C, 251, 15(1995). https://doi.org/10.1016/0921-4534(95)00398-3
  7. M. Tomita, M. Murakami, K. Katagiri, "Reliability of mechanical properties for bulk superconductors with resin impregnation", Physica C, 378-381, 783- 787 (2002). https://doi.org/10.1016/S0921-4534(02)01543-5
  8. M. Tomita, M. Murakami, "Effect of resin layer on the thermal stress of bulk superconductors", Physica C, 392-396, 493-498 (2003).
  9. M. Tomita, M. Murakami, "High-temperature superconductor bulk magnets that can trap magnetic fields of over 17 tesla at 29 K", Nature, 421, 517-520 (2003). https://doi.org/10.1038/nature01350
  10. M. Murakami, M. Morita, K. Doi, K. Miyamoto, "A New Process with the Promise of High Jc in Oxide Superconductor", Jpn. J. Appl. Phys, 28, 1189-1194 (1989). https://doi.org/10.1143/JJAP.28.1189
  11. G. E. Jang, W. S. Oh, C. J. Kim, Y. H. Han, S. Y. Jung and T. H. Sung, "The effect of impregnation by resin and CNT compound on the mechanical and magnetic properties of YBCO superconductor", Physica C, 468, 1411-1414 (2008). https://doi.org/10.1016/j.physc.2008.05.252