Abstract
Concrete filled steel tubes(CFST) is considered as a column having better structural stability and better performance of fire resistance than that made with H-section and hollow section in itself. To get the fire resistance of the CFST, two kinds of concrete strength were used, 21 MPa, 40 MPa and 4 sorts of the applied loads were calculated and used to the specimens such as 3.5 m long, round and rectangular section. After various fire tests under 4 sorts of load ratios, the fire resistance of the CFST is not possible to get over 1 hour because of the rapid decrease of concrete strength. The below 50% of the applied load is recommended to obtain over 1 hour fire resistance of the CFST.
콘크리트 충전강관기둥부재는 내력 및 내화적 효과가 우수한 것으로 인식되고 있으며, 이에 관련된 연구가 지속되는 추세이다. 콘크리트는 강관내부에 충전, 구속되므로 구조적 성능이 유지되면서 열용량의 효과가 발휘되어야 일정 시간이상의 내화성능이 발현될 것으로 판단된다. 따라서 본 논문의 목적은 21 MPa의 일반 콘크리트와 40 MPa의 고강도 콘크리트의 내화성능에 기여하는 정도를 파악하고, 향후 공학적 내화설계의 기반자료 제공을 위하여 축력비 100%, 80%, 60% 및 50%를 재하하는 내화시험을 수행하여, 강재의 표면온도, 콘크리트의 온도를 측정하였다. 콘크리트가 충전된 강관기둥부재는 30분이상의 내화성능 되지 못하였으며, 이는 콘크리트의 조기 균열에 의한 내력적 성능저하로 판단되었다. 따라서 일정시간 이상의 내화성능 확보는 작용 하중비를 50 %이하로 설정하는 것이 권장되었다.