Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Optimum Line Heating Condition for Straightening a Thin Plate Welded Structure

박판재 용접 구조물의 선상 가열 교정에서 최적 조건의 선정에 관한 연구

  • Park, Jun-Hyoung (Dept. of Mechanical Engineering, Graduate School of Yeungnam University) ;
  • Kim, Jae-Woong (School of Mechanical Engineering, Yeungnam University)
  • 박준형 (영남대학교 대학원 기계공학과) ;
  • 김재웅 (영남대학교 공과대학 기계공학부)
  • Received : 2010.02.11
  • Accepted : 2010.09.02
  • Published : 2011.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to establish the optimum line heating condition to straighten the excessive bending distortion of a thin plate welded structure. For it, the extensive FEA and experiments were performed to evaluate the effect of heat source, heating speed and position on the straightening of a thin plate welded structure. In accordance with the results obtained by FEA and experiments, the straightening effect of line heating was strongly depends on the variables used in this study. With the results, the optimum line heating condition was established by using the response surface method and verified through comparing it with the numerical analysis result.

Keywords

References

  1. K.Y. Benyounis, A.G. Olabi, M.S.J. Hashmi : Effect of laser welding parameter on the heat input and weld-bead profile, Journal of Materials Processing Technology, 164-165 (2005), 978-985 https://doi.org/10.1016/j.jmatprotec.2005.02.060
  2. P. Dong : Residual stress and distortions in welded structures, Journal of Science and Technology of Welding and Joining, 10-4 (2005), 389-398 https://doi.org/10.1179/174329305X29465
  3. C.-G Kim, J.-W Kim, and K.-C Kim : A study on the distortion of a thin plate panel by laser welding, Journal of KWS, 25-1 (2007), 49-56 (in Korea) https://doi.org/10.5781/KWJS.2007.25.1.049
  4. P. Michaleis and A. Debiccari : A predictive technique for buckling analysis of thin section panels due to welding, Journal of Ship Production, 12-4 (1996), 269-275
  5. C.-I. Kim, Design and Fabrication of Weld Structures, Wonchang Press, Korea, 1996 (in Korea)
  6. Stahl_Eisen-Werkstoffclaetter(SEW) des Vereins Deutscher Eisenhuettenleute Verlag Stahleisen mbh, Duesseldorf, 1992
  7. J. Goldak, A. Chakravarti, and M.bibby : A New Finite Element Model for Welding Heat Sources, Metallurgy Transactions B, 18B (1984), 299-305