International Journal of Fluid Machinery and Systems

Korean Society for Fluid machinery (한국유체기계학회)
권호 표지
DOI QR코드

DOI QR Code

Unsteady Analysis of Impeller-Volute Interaction in Centrifugal Pump

  • Cheah, Kean Wee (Department of Mechanical Engineering, National University of Singapore) ;
  • Lee, Thong See (Department of Mechanical Engineering, National University of Singapore) ;
  • Winoto, Sonny H. (Department of Mechanical Engineering, National University of Singapore)
  • Received : 2011.05.04
  • Accepted : 2011.06.23
  • Published : 2011.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

An unsteady numerical analysis has been carried out to study the strong impeller volute interaction of a centrifugal pump with six backward swept blades shrouded impeller. The numerical analysis is done by solving the three-dimensional Reynolds Averaged Navier-Stokes codes with standard k-${\varepsilon}$ two-equations turbulence model and wall regions are modeled with a scalable log-law wall function. The flow within the impeller passage is very smooth and following the curvature of the blade in stream-wise direction. However, the analysis shows that there is a recirculation zone near the leading edge even at design point. When the flow is discharged into volute casing circumferentially from the impeller outlet, the high velocity flow is severely distorted and formed a spiraling vortex flow within the volute casing. A spatial and temporal wake flow core development is captured dynamically and shows how the wake core diffuses. Near volute tongue region, the impeller/volute tongue strong interaction is observed based on the periodically fluctuating pressure at outlet. The results of existing analysis also proved that the pressure fluctuation periodically is due to the position of impeller blade relative to tongue.

Keywords

References

  1. Stepanoff, A.J., 1957, "Centrifugal and Axial Flow Pumps: Theory, Design and Application," 2nd Ed. Krieger, Melbourne, FL.
  2. Gulich, J.F., 2008, "Centrifugal Pumps," Springer.
  3. Eckardt, D., 1975, "Instantaneous Measurements in the Jet-Wake Discharge Flow of a Centrifugal Compressor," ASME J. of Engineering for Power, 97(3), pp. 337-346. https://doi.org/10.1115/1.3445999
  4. Bwalya, A.C., and Johnson, M.W., 1996, "Experimental Measurements in a Centrifugal Pump," ASME J. of Fluids Eng., Vol. 116, pp. 692-697.
  5. Howard J.H.G. and Kittmer C.W., 1975, "Measured Passage Velocities in a Radial Impeller with Shrouded and Unshrouded Configurations," ASME J. of Engineering for Power, pp. 207-213.
  6. Murakami M., Kikuyama K., and Asakura, 1980, "Velocity and Pressure Distributions in the Impeller passages of Centrifugal Pump," ASME J. of Fluids Eng., Vol.102, pp. 420-426. https://doi.org/10.1115/1.3240714
  7. Hong S.S. and Kang S.H., 2002, "Exit Flow Measurement of a Centrifugal Pump Impeller," KSME International Journal, Vol. 16, No. 9, pp. 1147-1155. https://doi.org/10.1007/BF02984434
  8. Pedersen, N., Larsen, P.S., and Jacobsen, C.B., 2003, "Flow in a Centrifugal Pump at Design and Off-Design Conditions - Part I: Particle Image Velocimetry (PIV) and Laser Doppler Velocimetry (LDV) Measurement," ASME J. of Fluids Eng., Vol. 125, pp. 61-72. https://doi.org/10.1115/1.1524585
  9. Liu, C.H., Vafidis, C., and Whitelaw, J.H., 1994, "Flow Characteristics of a Centrifugal Pump," ASME J. of Fluids Eng., Vol. 116, pp. 303-309. https://doi.org/10.1115/1.2910272
  10. Abramian, M., and Howard, J.H.G., 1994, "Experimental Investigation of the Steady and Unsteady Relative Flow in a Model Centrifugal Impeller Passage," ASME J. of Fluids Eng., Vol. 116, pp. 269-279.
  11. Wuibaut, G., Bois, G., Dupont, P., Caignaert, G., and Stanislas, M., 2002, "PIV Measurements in the Impeller and the Vaneless Diffuser of a Radial Flow Pump in Design and Off-Design Operating Conditions," ASME J. of Fluids Eng., Vol 124, pp. 791-797. https://doi.org/10.1115/1.1486473
  12. Westra, R.W., Broersma, L., van Andel, K., and Kruyt, N.P., 2010, "PIV Measurements and CFD Computations of Secondary Flow in a Centrifugal Pump Impeller," ASME J. of Fluids Eng., Vol. 132, pp. 061104-1-8 https://doi.org/10.1115/1.4001803
  13. Visser, F.C., Brouwers, J.J.H., and Jonker, J.B., 1999, "Fluid Flow in a Rotating Low-specific-speed Centrifugal Impeller Passage," Fluid Dynamics Research, 24, pp. 275-292. https://doi.org/10.1016/S0169-5983(98)00033-1
  14. Choi, Y.D., Kurokawa, J., and Matsui, J., 2006, "Performance and Internal Flow Characteristics of a Very Low Specific Speed Centrifugal Pump," ASME J. of Fluids Eng., Vol 128, pp. 341-349. https://doi.org/10.1115/1.2169815
  15. Dong, R., Chu, S., and Katz, J., 1992, "Quantitative Visualization of the Flow within the Volute of a Centrifugal Pump. Part B: Results and Analysis," ASME J. of Fluids Eng., Vol. 114, pp. 396-403. https://doi.org/10.1115/1.2910044
  16. Chu, S., Dong R., and Katz, J., 1995, "Relationship between Unsteady Flow, Pressure Fluctuations, and Noise in a Centrifugal Pump; Part B: Effects of Blade-Tongue Interactions," ASME J. of Fluids Eng., Vol. 177, pp. 30-35.
  17. Al-Qutub, A., Khalifa, A., and Khulief, Y., 2009, "Experimental Investigation of the Effect of Radial Gap and Impeller Blade Exit on Flow Induced Vibration at the Blade Passing Frequency in a Centrifugal Pump," Vol. 2009, Article I.D 704845.
  18. Dong, R., Chu S., and Katz, J., 1997, "Effect of Modification to Tongue and Impeller Geometry on Unsteady Flow, Pressure Fluctuations, and Noise in a Centrifugal Pump," ASME J. of Turbomachinery, Vol. 119, pp. 506-515. https://doi.org/10.1115/1.2841152
  19. Lipski, W., 1979, "The Influence of Shape and Location of the Tongue of Spiral Casing on the Performance of Single Stage radial Pumps," Proc. Of 6th Conference Fluid Machinery, Budapest, pp. 673-680.
  20. Parrondo-Gayo J.L., Gonzalez-Perez J., and Fernandez-Francos, J., 2002, "The Effect of the Operating Point on the Pressure Fluctuations at the Blade Passage Frequency in the Volute of a Centrifugal Pump," ASME J. of Fluids Eng., Vol. 124, pp. 784-790. https://doi.org/10.1115/1.1493814
  21. Gulich, J.F., 1999, "Impact of Three-dimensional Phenomena on the Design of Rotodynamic Pumps," Proc. Instn. Mech. Engrs., Vol. 213 Part C, pp. 59-70.
  22. Horlock, J.H. and Denton, J.D., 2005, "A Review of Some Early Design Practice Using Computational Fluid Dynamics and a Current Perspective," ASME J. of Turbomahcinery, Vol. 127, pp. 5-13. https://doi.org/10.1115/1.1650379
  23. Croba, D. and Kueny, J.L., 1996, "Numerical Calculation of 2D, Unsteady Flow in Centrifugal Pumps: Impeller and Volute Interaction," Int'l J. For Numerical Methods In Fluids, Vol. 22, pp. 467-481. https://doi.org/10.1002/(SICI)1097-0363(19960330)22:6<467::AID-FLD324>3.0.CO;2-O
  24. Morfiadakis, E. E., Voutsinas S. G., and Papantonis, D. E., 1991, "Unsteady Calculation in a Radial Flow Centrifugal Pump With Spiral Casing," Int'l J. For Numerical Methods In Fluids, Vol. 12, pp. 895-908. https://doi.org/10.1002/fld.1650120907
  25. Zhang, M.J., Pomfret, M.J., and Wong, C.M., 1996, "Three-Dimensional Viscous Flow Simulation In A Backswept Centrifugal Impeller At The Design Point," Int'l J. of Computers & Fluids, Vol. 25, No. 5, pp. 497-507. https://doi.org/10.1016/0045-7930(96)00008-4
  26. Zhang, M.J., Pomfret, M.J. and Wong, C.M., 1996, "Performance Prediction of a Backswept Centrifugal Impeller At Offdesign Conditions," Int'l J. For Numerical Methods in Fluids, Vol. 23, pp. 883-895. https://doi.org/10.1002/(SICI)1097-0363(19961115)23:9<883::AID-FLD454>3.0.CO;2-4
  27. He, L., and Sato, K., 2001, "Numerical Solution of Incompressible Unsteady Flows in Turbomachniery," ASME J. of Fluids Eng., Vol. 123, pp. 680-685. https://doi.org/10.1115/1.1383595
  28. Gonzalez, J., Fernandez, J., Blanco, E., and Santolaria, C., 2002, "Numerical Simulation of the Dynamic Effects Due to Impeller Volute Interaction in a Centrifugal Pump," ASME J. of Fluids Eng., Vol. 124, pp. 348-355. https://doi.org/10.1115/1.1457452
  29. Gonzalez, J., and Santolaria, C., 2006, "Unsteady Flow Structure and Global Variables in a Centrifugal Pump," ASME J. of Fluids Eng., Vol. 128, pp. 937-946. https://doi.org/10.1115/1.2234782
  30. Gonzalez, J., Manuel, J., Oro, M., Diaz, K.M.A. and Blanco, E., 2009, "Unsteady Flow Pattern for a Double Suction Centrifugal Pump," ASME J. of Fluids Eng., Vol. 131, pp. 071102-1-9. https://doi.org/10.1115/1.3153367
  31. Spence, R., and Amaral-Teixeira, J., 2008, "Investigation into Pressure Pulsations in a Centrifugal Pump Using Numerical Methods Supported by Industrial Test," Computers & Fluids, Vol. 37, pp. 690-704. https://doi.org/10.1016/j.compfluid.2007.10.001
  32. Feng, J.J., Benra, F.K. and Dohmen, H.J., 2007, "Numerical Investigation on Pressure Fluctuations for Different Configurations of Vaned Diffuser Pumps," International J. of Rotating Machinery, Vol. 2007, Article ID 34752.
  33. Feng, J.J., Benra, F.K., and Dohmen, H.J., 2009, "Comparison of Periodic Flow Fields in a Radial Pump among CFD, PIV, and LDV Results," International J. of Rotating Machinery, Vol. 2009, Article ID 410838
  34. Cheah K.W., Lee, T. S., and Winoto, S.H., 2011, "Numerical Study of Inlet and Impeller Flow Structures in Centrifugal Pump at Design and Off-design Points," International J. of Fluid Machinery and Systems, Vol. 4, No.1, pp. 25-32. https://doi.org/10.5293/IJFMS.2011.4.1.025
  35. Elholm, T., Ayder, E. and Van den Braembussche, R.A., 1992, "Experimental Study of the Swirling Flow in Volute of Centrifugal Pump," ASME J. of Turbomachinery, Vol. 114, pp. 366-372. https://doi.org/10.1115/1.2929153

Cited by

  1. Spiral Casing of a Volute Centrifugal Pump - Effects of the Cross Sectional Shape - vol.16, pp.4, 2013, https://doi.org/10.5293/kfma.2013.16.4.028
  2. Spiral casing of a volute centrifugal pump vol.28, pp.7, 2014, https://doi.org/10.1007/s12206-014-0626-0
  3. Effect of a volute on the unsteady flow in the vane diffuser of a centrifugal compressor vol.230, pp.8, 2016, https://doi.org/10.1177/0957650916673935