참고문헌
- Myers, G. E. 1983. Formaldehyde emission from particleboard and plywood paneling: measurement, mechanism, and product standards. For. Prod. J. 33(5): 27-37.
- Myers, G. E. 1986a. Mechanisms of formaldehyde release from bonded wood products. In: Formaldehyde Release from Wood Products. Meyer B, Andrews BAK, Reinhardt RM. Ed., American Chemical Society pp. 87-106.
- Marutzky, R. 1986. Release of formaldehyde by wood products, In: Wood Adhesives: Chemistry and Technology, Vol. 2. Pizzi A, Ed., Marcel Dekker Inc., pp. 307-387.
- Park B. D., S. M. Lee, and J. K. Roh. 2009. Effects of formaldehyde/urea mole ratio and melamine content on the hydrolytic stability of cured urea-melamine-formaldehyde resin. Euro. J. Wood Prod. 67: 121-123. https://doi.org/10.1007/s00107-008-0277-x
- Pizzi, A., L. Lipschitz, and J. Valenzuela. 1994. Theory and practice of the preparation of low formaldehyde emission UF adhesives. Holzforschung 48(3): 254-261. https://doi.org/10.1515/hfsg.1994.48.3.254
- Hse, C. Y., Z. Y. Xia, and B. Tomita. 1994. Effects of reaction pH on properties and performance of urea-formaldehyde resins. Holzforschung 48(6): 527-534. https://doi.org/10.1515/hfsg.1994.48.6.527
- Gu, J. Y., M. Higuchi, M. Morita, and C. Y. Hse. 1996. Synthetic conditions and chemical structures of urea-formaldehyde resins II. Synthetic procedures involving a condensation step under strongly acidic conditions and the properties of the resins obtained. Mokkuzai Gakkaishi 42(2): 149-156.
- Myers, G. E. 1984. How mole ratio of UF resin affects formaldehyde emission and other properties: A literature critique. For Prod J. 34(5): 35-41.
- Park, B. D., E. C. Kang, and J. Y. Park. 2006. Effects of formaldehyde to urea mole ratio on thermal curing behavior of urea-formaldehyde resin and properties of particleboard. J. Appl. Polym. Sci. 101: 1787-1792. https://doi.org/10.1002/app.23538
- Myers, G. E. 1986b. In: Proceedings of Wood Adhesives in 1985: Status and needs. Christiansens, A. W.; Gillespie, R.; Myers, G. E.; River, B. H. Eds. Forest Products Research Society pp. 119-156.
- Zinn, T. W., D. Cline, and W. F. Lehmann. 1990. Long-term study of formaldehyde emission decay from particleboard. For. Prod. J. 40(6): 15 -18.
- Myers, G. E. and M. Nagaoka. 1981. Emission of formaldehyde by particleboard: Effect of ventilation rate and loading on air-concentration levels. For. Prod. J. 31(7): 39-44.
- Myers, G. E. 1984. Effects of ventilation rate and board loading on formaldehyde concentration: a critical review of the literature. For. Prod. J. 34(10): 59-68.
- Chuang, I. S. and G. E. Maciel. 1993. NMR study of the stabilities of urea-formaldehyde resins components toward hydrolytic treatments. J. Appl. Polym. Sci. 52: 1637-1651.
- Tohmura, S., C. Y. Hse, and M. Higuchi. 2000. Formaldehyde emission and high-temperature stability of cured urea-formaldehyde resins. Wood Sci. 46: 303-309. https://doi.org/10.1007/BF00766221
- Ringena, O., R. Janzon, G. Pfizenmayer, M. Schulte, and R. Lehnen. 2006. Estimating the hydrolytic durability of cured wood adhesives by measuring formaldehyde liberation and structural stability. Holz als Roh-und Werkstoff 64: 321-326. https://doi.org/10.1007/s00107-005-0087-3
- Myers, G. E. 1982. Hydrolytic stability of cured urea-formaldehyde resins, Wood Sci. 15: 127- 138.
- Kavvouras, P. K., D. Koniditsiotis, and J. Petinarakis. 1998. Resistance of cured urea-formaldehyde resins to hydrolysis: A method of evaluation. Holzforschung 52(1): 105-110. https://doi.org/10.1515/hfsg.1998.52.1.105
- Nessuer, H. and W. Schall. 1970. Experiments for the determination of hydrolysis phenomena in particleboards. Holzforschung Holzverwert, 22(6): 116-120.
- Myers, G. E. and J. A. Koutsky. 1990. Formaldehyde liberation and cure behavior of ureaformaldehyde resins. Holzforschung 44(2): 117- 126. https://doi.org/10.1515/hfsg.1990.44.2.117
- Elbert, A. A. 1995. Influence of hardener sys tems and wood on the formaldehyde emission from urea-formaldehyde resin and particleboard. Holzforschung 49(4): 358-362. https://doi.org/10.1515/hfsg.1995.49.4.358
- Robitschek, R. and R. L. Christensen. 1976. Degradation phenomena in urea-formaldehyde resin-bonded particleboard. For. Prod. J. 26(12): 43-46.
- Park, B. D. and H. W. Jeong. 2009. Hydrolytic stability and microstructure of cured urea-formaldehyde resins. Presented at the International Conference on Wood Adhesives, September 28-30, 2009. Harveys Resort Hotel & Casino, Lake Tahoe, Nevada, USA.
- Stuligross, J. and J. A. Kousky. 1985. A morphological study of urea-formaldehyde resins, J. Adhesion 18: 281-299. https://doi.org/10.1080/00218468508080464
- Johns, W. E. and A. K. Dunker. 1986. Ureaformaldehyde resins. In: Formaldehyde Release from Wood Products, Meyer B, Andrews BAK, Reinhardt RM. Ed., The American Chemical Society pp. 76-86.
- Celzard, A., A. Pizzi, and V. Fifero. 2008. Physical gelation of water-borne thermosetting resins by percolation theory-urea-formaldehyde, melamineurea- formaldehyde, and melamine-formaldehyde resins. J. Polym. Sci.: Part B: Polym. Phys. 46: 971-978. https://doi.org/10.1002/polb.21433
- Despres, A. and A. Pizzi. 2006. Colloidal aggregation of aminoplastic polycondensation resins: urea-formaldehyde versus melamine-formaldehyde and melamine-urea-formaldehyde resins. J. Appl. Polym. Sci. 100: 1406-1412. https://doi.org/10.1002/app.23230
- Pratt, T. J., W. E. Johns, R. M. Rammon, and W. L. Plagemann. 1985. A novel concept on the structure of cured urea-formaldehyde resin. J. Adhesion 17: 275-295. https://doi.org/10.1080/00218468508081165
- Motter, W. K. 1990. The Formation of the Colloidal phase in Low Mole Ratio Urea- Formaldehyde Resins. Ph. D. Thesis, Department of Mechanical and Materials Engineering, Washington State University, Pullman, WA, USA.
- Levendis, D., A. Pizzi, and E. Ferg. 1992. The correlation of strength and formaldehyde emission with crystalline/amorphous structure of UF resins. Holzforschung 46(3): 263-269. https://doi.org/10.1515/hfsg.1992.46.3.263
- Dunker, A. K., W. E. Johns, R. Rammon, B. Framer, and S. Johns. 1986. Slightly bizarre protein chemistry: urea-formaldehyde resin from a biochemical perspective. J. Adhesion 19: 153-176. https://doi.org/10.1080/00218468608071219
피인용 문헌
- Microstructure of Cured Urea-Formaldehyde Resins Modified by Rubber Latex Emulsion after Hydrolytic Degradation vol.42, pp.5, 2014, https://doi.org/10.5658/WOOD.2014.42.5.605
- Hardness evaluation of cured urea–formaldehyde resins with different formaldehyde/urea mole ratios using nanoindentation method vol.49, pp.10, 2013, https://doi.org/10.1016/j.eurpolymj.2013.06.013
- Urea-formaldehyde resins: production, application, and testing vol.223, 2017, https://doi.org/10.1088/1757-899X/223/1/012053
- Micro-Morphological Features of Cured Urea-Formaldehyde Adhesives Detected by Transmission Electron Microscopy vol.92, pp.2, 2016, https://doi.org/10.1080/00218464.2014.1003545
- Morphological, chemical and crystalline features of urea–formaldehyde resin cured in contact with wood vol.56, 2014, https://doi.org/10.1016/j.eurpolymj.2014.04.014
- MRT Letter: High resolution SEM imaging of nano-architecture of cured urea-formaldehyde resin using plasma coating of osmium vol.76, pp.11, 2013, https://doi.org/10.1002/jemt.22272
- Quantification of hydrolytic degradation of cured urea-formaldehyde resin adhesives using confocal laser scanning microscopy vol.74, 2017, https://doi.org/10.1016/j.ijadhadh.2016.12.004
- Analysis of the hydrolysates from cured and uncured urea-formaldehyde (UF) resins with two F/U mole ratios vol.72, pp.9, 2018, https://doi.org/10.1515/hf-2018-0010