DOI QR코드

DOI QR Code

The Study of Flexural Strength of Full Zirconia Crown using Block after Clinical Work

Full Zirconia Crown용으로 사용되는 block의 제조사의 굴곡강도와 임상작업후의 굴곡강도에 관한 연구

  • 정효경 (대구보건대학교 치기공과) ;
  • 곽동주 (대구보건대학교 치기공과)
  • Received : 2011.10.26
  • Accepted : 2011.12.28
  • Published : 2011.12.30

Abstract

Purpose: The purpose of this study was to evaluate flexural strength of full zirconia crown using block after clinical work. Methods: The three point bending test was used to measure the flexural strength of zirconia block. Statistical analysis was done using the Statistical Package for Social Sciences version 19.0 for Windows. As for the analysis methods, the study used analysis of variance, Tukey's test. Results: The ave Rage value of flexural strengths of WIELAND, Zirkonzahn, Hass, D-MAX were 516.2 MPa, 612.6MPa, 566.2MPa, 744.6MPa. The ave Rage value of Surface Roughness of WIELAND, Zirkonzahn, Hass, D-MAX were 0.39Ra, 0.33Ra, 0.33Ra, 0.47Ra. Conclusion: Flexural strength of zirconia block decreased after clinical work. Flexural strength of zirconia block is equal to or higher than flexural strength of dental metal, so zirconia block can be used as dental material.

Keywords

References

  1. 김명화. 다양한 표면 처리 방법이 Y-TZP 지르코니아의 미세 구조와 굴곡 강도에 미치는 영향. 전남대학교 대학원 석사학위논문, 2009.
  2. 박지현. CAD/CAM과 Copy Milling 방법으로 제작한 지르코니아 코어의 변연 적합도에 관한 비교연구. 서울대학교 대학원 석사학위논문, 2010.
  3. 박재홍. 수종 지르코니아 세라믹의 굴곡강도에 관한 연구. 고려대학교 대학원 석사학위논문, 2003.
  4. 서준용, 박인임, 이근우. CAD/CAM을 이용한 구치부 전부도재 고정성 국소의치 지르코니아 코어의 연결 부 설계에 따른 파절강도. 대한치과보철학회지, 44 (1), 29-39, 2006.
  5. Abduo J. LYONS K, Swain M. Fit zirconia fixed partial denture: a systemic review. J Oral Rehabil, 37(8), 66-76, 2010.
  6. Christel P, Meunier A, Heller M, Torre JP, Peille CN. Mechanical properties and shortterm in-vivo evaluation of yttrium-oxidepartially- stabilized zirconia. J Biomed Mater Res, 23(1), 45-61. 1989. https://doi.org/10.1002/jbm.820230105
  7. Filser F, Kocher P, Gauckler LJ. Net-shaping of ce Ramic components by direct ce Ramic machining. Assembly Autom, 23(1), 382-390, 2003. https://doi.org/10.1108/01445150310501217
  8. Guazzato M, Albakry M, Ringer SP, Swain MV. Strength, f Racture toughness and microstructure of a selection of all-ce Ramic materials. Part I. Pressable and alumina glass-infilt Rated ce Ramics. Dent Mater, 20 (1), 441-448, 2004. https://doi.org/10.1016/j.dental.2003.05.003
  9. Hang Wang, Moustafa N, Aboushelib, Albert J. Feilzer. Strength influencing variables on CAD/CAM zirconia frameworks. Dental materials, 24(1), 633-638, 2008. https://doi.org/10.1016/j.dental.2007.06.030
  10. Piconi C, Maccauro G. Review zirconia as a ce Ramic biomaterial. Biomaterials, 20(1), 1-25, 1999. https://doi.org/10.1016/S0142-9612(98)00010-6
  11. Shimizu K, Oka M, Kumar P, Kotou Ra Y, Yamamuro T, Makinouchi K. Time-dependent changes in the mechanical properties of zirconia ce Ramic. J Biomed Mater Res, 27(7), 29-34, 1993.
  12. Suarez MJ, Lozano JF, Paz Saliod M, Maritinez F. There year clinical evaluation of In-Cream Zirconia posterior FPDs. Int J Prosthodnt, 17 (6), 35-38, 2004.
  13. Virkar AV, Matsumoto RLK. Ferroelastic Domain Switching as a Toughenin Mechanism in Tet Ragonal Zirconia. J Am Ceram. Soc, 69(1), 244- 260, 1986.
  14. Witek SR, Butler EP. Zirconia particles coarsening and the effect of zirconia additions on the mechanical properties of cetain commercial aluminas, J Am Ceram Soc, 69(1), 523-529, 1986. https://doi.org/10.1111/j.1151-2916.1986.tb04787.x

Cited by

  1. 치과용 생체보철물 제작을 위한 TZP 단일구조 전부도재관 블럭의 물성과 저온열화 후 굴곡강도에 관한 연구 vol.34, pp.2, 2011, https://doi.org/10.14347/kadt.2012.34.2.083