DOI QR코드

DOI QR Code

Shape factors of cylindrical permeameters

  • Silvestri, Vincenzo (Department of Civil, Geological, and Mining Engineering, Ecole Polytechnique) ;
  • Samra, Ghassan Abou (Department of Civil, Geological, and Mining Engineering, Ecole Polytechnique) ;
  • Bravo-Jonard, Christian (Department of Civil, Geological, and Mining Engineering, Ecole Polytechnique)
  • Received : 2010.06.30
  • Accepted : 2011.02.24
  • Published : 2011.03.25

Abstract

This paper presents an analytical solution for steady state flow into a close-ended cylindrical permeameter. The soil medium is considered to be uniform, isotropic, and of infinite thickness. Laplace equation is solved by considering rotational symmetry and by using curvilinear coordinates obtained from conformal mapping. The deduced shape factors, which are compared to approximate relationships obtained from both numerical and physical modelling, and idealizations involving ellipsoidal cavities, are proposed for use in field measurements. It is shown that some of the shape factors obtained are significantly different from published values and show a much higher dependence of the rate of flow on the aspect ratio, than deduced from approximate solutions.

Keywords

References

  1. Al-Dhahir, Z.A. and Morgenstern, N.R. (1969), "Intake factors for cylindrical piezometers", Soil Sci., 107(1), 17- 21. https://doi.org/10.1097/00010694-196901000-00004
  2. Brand, E.W. and Premchitt, J. (1980), "Shape factors of cylindrical piezometers", Geotechnique, 30(4), 369-384. https://doi.org/10.1680/geot.1980.30.4.369
  3. Cassan, M. (1980), Les essais d'eau dans la reconnaissance des sols, Eyrolles, Paris.
  4. Chapuis, M. (1989), "Shape factors for permeability tests in boreholes and piezometers", Ground Water, 27(5), 647-654. https://doi.org/10.1111/j.1745-6584.1989.tb00478.x
  5. Gradshteyn, I.S. and Ryzhik, I.M. (1980), Table of integrals, series, and products, Academic Press, Inc., San Diego, California.
  6. Hvorslev, M.J. (1951), "Time lag and soil permeability in ground water observations", Bulletin No.36, U.S. Army Waterways Experiment Station, Vicksburg, MS.
  7. Kallstenius, T. and Wallgren, A. (1956), "Pore pressure measurements in field investigations", Royal Swedish Geotechnical Institute, No. 13, 58.
  8. Lafhaj, Z. and Shahrour, I. (2000), "Use of the boundary element method for the analysis of permeability tests in boreholes", Eng. Anal. Bound. Elem., 24(9), 695-698. https://doi.org/10.1016/S0955-7997(00)00042-4
  9. Lafhaj, Z. and Shahrour, I. (2002), "Use of electric analogy for the determination of the shape factor in complex soil conditions", Int. J. Phys. Model. Geotech., 2(4), 39-44. https://doi.org/10.1680/ijpmg.2002.2.4.39
  10. Mathias, S.A. and Butler, A.P. (2007), "Shape factors for constant-head double-packer permeameters", Water Resour. Res., 43, WO6430, doi: 10.1029/2006WR005279.
  11. Mathias, S.A. and Butler, A.P. (2006), "An improvement on Hvorslev's shape factors", Geotchnique, 56(10), 705-706. https://doi.org/10.1680/geot.2006.56.10.705
  12. Moon, P. and Spencer, D.E. (1961), Field theory for engineers, Van Nostrand Company, Inc., Princeton, NJ.
  13. Randolph, M.F. and Booker, J.R. (1982), "Analysis of seepage into a cylindrical permeameter", Proceedings of the 4th International Conference on Numerical Methods in Geomechanics, Edmonton, AB, Volume I, 349-357.
  14. Ratnam, S., Soga, K. and Whittle, R.W. (2001), "Revisiting Hvorslev's intake factors with the finite element method", Geotechnique, 51(7), 641-645. https://doi.org/10.1680/geot.2001.51.7.641
  15. Schmid, W.E. (1967), "Field determination of permeability by the infiltration test", Proceedings of a Symposium on Permeability and Capillarity of Soils, Atlantic City, N.J., 26 June-1 July 1966, American Society for Testing and Materials, Philadephia, PA, STP 417, 142-158.
  16. Schneebeli, G. (1954), "Mesure de la permeabilite d'un terrain", Comtes rendus des 3iemes Journees d'Hydraulique, Alger, 270-279.
  17. Smiles, D.E. and Youngs, E.G. (1965), "Hydraulic conductivity determinations by several field methods in a sand tank", Soil Sci., 99(2), 83-87. https://doi.org/10.1097/00010694-196502000-00003
  18. Tavenas, F., Diene, M. and Leroueil, S. (1990), "Analysis of the in situ constant-head permeability test in clays", Can. Geotech. J., 27(3), 305-314. https://doi.org/10.1139/t90-041
  19. Wilkinson, W.B. (1968), "Constant head in in situ permeability test in clay strata", Geotechnique, 18(2), 172-194. https://doi.org/10.1680/geot.1968.18.2.172
  20. Youngs, E.G. (1980), "Discussion on a note on Hvorslev's intake factors" by G. Lother, Geotechnique, 30(3), 328-331. https://doi.org/10.1680/geot.1980.30.3.328
  21. Youngs, E.G. (1968), "Shape factors for Kirkham's piezometer method for determining the hydraulic conductivity of soil in situ", Soil Sci., 106(3), 235-237. https://doi.org/10.1097/00010694-196809000-00014