DOI QR코드

DOI QR Code

Probability-based durability design software for concrete structures subjected to chloride exposed environments

  • Shin, Kyung-Joon (Department of Civil Engineering, Chungnam National University) ;
  • Kim, Jee-Sang (Department of Civil Engineering, Seokyeong University) ;
  • Lee, Kwang-Myong (Department of Civil and Environmental Engineering, Sungkyunkwan University)
  • Received : 2010.03.23
  • Accepted : 2010.10.11
  • Published : 2011.10.25

Abstract

Although concrete is believed to be a durable material, concrete structures have been degraded by severe environmental conditions such as the effects of chloride and chemical, abrasion, and other deterioration processes. Therefore, durability evaluation has been required to ensure the long term serviceability of structures located in chloride exposed environments. Recently, probability-based durability analysis and design have proven to be reliable for the service-life predictions of concrete structures. This approach has been successfully applied to durability estimation and design of concrete structures. However, currently it is difficult to find an appropriate method engineers can use to solve these probability-based diffusion problems. In this paper, computer software has been developed to facilitate probability-based durability analysis and design. This software predict the chloride diffusion using the Monte Carlo simulation method based on Fick's second law, and provides durability analysis and design solutions. A graphic user interface (GUI) is adapted for intuitive and easy use. The developed software is very useful not only for prediction of the service life but for the durability design of the concrete structures exposed to chloride environments.

Keywords

References

  1. Ang, H.S. and Tang, W. (1984), Probability concepts in engineering planning and design - decision risk and reliability, John Wiley & Sons, New York.
  2. Bamforth, P.B. (1998), "Spreadsheet model for reinforcement corrosion in structures exposed to chlorides", Concrete under Severe Conditions 2: Environment and Loading, E&FN SPON, London, 1, 64-75.
  3. Chiu, C.K., Noguchi, T. and Kanematsu, M. (2008), "Optimal maintenance plan for RC members by minimizing life-cycle cost including deterioration risk due to carbonation", J. Adv. Concrete Tech., 6(3), 469-480. https://doi.org/10.3151/jact.6.469
  4. Collepardi, M., Marcialis, A. and Turriziani, R. (1972), "Penetration of chloride ions into cement pastes and concrete", J. Am. Ceram. Soc., 55(10), 534-535. https://doi.org/10.1111/j.1151-2916.1972.tb13424.x
  5. Crank, J. (1975), The mathematics of diffusion, London: Arrowsmith: 11-24, 104.
  6. Duracrete Final Report (2000), DuraCrete probabilistic performance based durability design of concrete structures, Document BE95-1347/R17, The Netherlands.
  7. Edvardsen, C., Kim, Y.I. and Kim, J.C. (2005), "Practical implementation of a reliability-based concrete", Proceedings of International Conference on Concrete Repair, Rehabilitation and Retrofitting ICCRRR, Talor & Francis, Cape Town, South Africa, 21-23 Nov, 109.
  8. Edvardsen, C., Kim, Y.J., Park, S.J., Jeong, S.K. and Im, H.C. (2006), "Busan-geoje fixed link concrete durability design for bridges and tunnels", Proceedings of the ITA-AITES 2006 World Tunnel Congress and 32nd ITA General Assembly, 22-27 April 2006, Seoul, Korea.
  9. Ferreira, M., Jalali, S. and Gjrv, O.E. (2004), "Software for probability-based durability analysis of concrete structures", Concrete under Severe Conditions, 2 CONSEC'04, Seoul, Korea.
  10. Gehlen, C. and Schiessl, P. (1999), "Probability-based durability design for the western scheldt tunnel", Struct. Concrete, 2, 1-7.
  11. Kim, J.S., Jung, S.H., Kim, J.H., Lee, K.M., Bae, S.H. and Kim, Y.G. (2006), "Probabilistic durability of concrete bridge structures in Korea", Proceedings of the Third International Conference on Bridge Maintenance, Safety and Management, 16-19 July, Porto, Portugal.
  12. Luping, T. and Gulikers, J. (2007), "On the mathematics of time-dependent apparent chloride diffusion coefficient in concrete", Cement Concrete Res., 37(4), 589-595. https://doi.org/10.1016/j.cemconres.2007.01.006
  13. Mangat, P.S. and Molloy, B.T. (1995), "Chloride binding in concrete containing PFA, GBS or silica fume under sea water exposure", Mag. Concrete Res., 47(171), 129-141. https://doi.org/10.1680/macr.1995.47.171.129
  14. MATLAB (2004), Getting started guide, the MATH WORKS, Inc.
  15. Mehta, P.K. and Monteiro, P.J.M. (2006), Concrete: microstructure, properties, and materials, McGraw-Hill.
  16. Park, S.J., Kim, Y.J., Lim, H.C. and Jang, H.G. (2005), "High durability concrete for service life of 100 years applied in GK project", Mag. Korea Concrete Inst., 17(6), 62-71. (in Korean)
  17. Papadakis, V.G., Efstathiou, M.P. and Apostolopoulos, C.A. (2007), "Computer-aided approach of parameters influencing concrete service life and field validation", Comput. Concrete, 4(1), 1-18. https://doi.org/10.12989/cac.2007.4.1.001
  18. Ramezanianpour, A.A., Shahhosseini, V. and Moodi, F. (2009), "A fuzzy expert system for diagnosis assessment of reinforced concrete bridge decks", Comput. Concrete, 6(4), 281-303. https://doi.org/10.12989/cac.2009.6.4.281
  19. Sancharoen, P., Kato, Y. and Uomoto, T. (2008), "Probability-based maintenance planning for RC structures attacked by chloride", J. Adv. Concrete Tech., 6(3), 481-495. https://doi.org/10.3151/jact.6.481
  20. Sarja, A. and Vesikari, E. (1996), Durability design of concrete structures, E & FN Spon, London, UK.
  21. Schiessl, P. (2005), "New approach to service life design of concrete", Asian J. Civil Eng. (Building and Housing), 6(5), 393-407.
  22. Tang, L. and Nilsson, L.O. (1992), "Chloride diffusivity in high strength concrete at different ages", Nordic Concrete Res., 11, 162-171.
  23. Teply, B., Vorechovska, D. and Kersner, Z. (2010), "Performance-based design of concrete structures: durability aspects", Struct. Eng. Mech., 35(4), 535-538. https://doi.org/10.12989/sem.2010.35.4.535
  24. Thomas, M.D.A. and Bentz, E.C. (2000), Life-365 manual, Silica Fume Association.

Cited by

  1. Assessment of some parameters of corrosion initiation prediction of reinforced concrete in marine environments vol.13, pp.1, 2014, https://doi.org/10.12989/cac.2013.13.1.071
  2. Transient Chloride Ion Diffusion in a Homogeneous Concrete Column vol.39, pp.5, 2014, https://doi.org/10.1007/s13369-014-1051-5
  3. Numerical investigation on tortuosity of transport paths in cement-based materials vol.13, pp.3, 2014, https://doi.org/10.12989/cac.2014.13.3.309
  4. Testing of the permeability of concrete box beam with ion transport method in service vol.15, pp.3, 2015, https://doi.org/10.12989/cac.2015.15.3.461
  5. Probabilistic Generalization of a Comprehensive Model for the Deterioration Prediction of RC Structure under Extreme Corrosion Environments vol.10, pp.9, 2018, https://doi.org/10.3390/su10093051
  6. Probabilistic time-dependent sensitivity analysis of HPC bridge deck exposed to chlorides vol.19, pp.3, 2011, https://doi.org/10.12989/cac.2017.19.3.305
  7. Prediction of the remaining service life of existing concrete bridges in infrastructural networks based on carbonation and chloride ingress vol.21, pp.3, 2011, https://doi.org/10.12989/sss.2018.21.3.305
  8. The effect of microscopic cracks on chloride diffusivity of recycled aggregate concrete vol.170, pp.None, 2011, https://doi.org/10.1016/j.conbuildmat.2018.03.045
  9. A simplified probabilistic model for the combined action of carbonation and chloride ingress vol.71, pp.7, 2019, https://doi.org/10.1680/jmacr.18.00140
  10. Reliability index assessment by different methods in the concrete bridges subjected to corrosion vol.4, pp.4, 2019, https://doi.org/10.1080/24705314.2019.1657706