Computers and Concrete

  • 제8권4호
  • /
  • Pages.371-388
  • /
  • 2011
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A constitutive model for fiber-reinforced extrudable fresh cementitious paste

  • Zhou, Xiangming (School of Engineering and Design, Brunel University) ;
  • Li, Zongjin (Department of Civil and Environmental Engineering, The Hong Kong University of Science and Technology)
  • 투고 : 2009.10.22
  • 심사 : 2010.08.18
  • 발행 : 2011.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, time-continuous constitutive equations for strain rate-dependent materials are presented first, among which those for the overstress and the consistency viscoplastic models are considered. By allowing the stress states to be outside the yield surface, the overstress viscoplastic model directly defines the flow rule for viscoplastic strain rate. In comparison, a rate-dependent yield surface is defined in the consistency viscoplastic model, so that the standard Kuhn-Tucker loading/unloading condition still remains true for rate-dependent plasticity. Based on the formulation of the consistency viscoplasticity, a computational elasto-viscoplastic constitutive model is proposed for the short fiber-reinforced fresh cementitious paste for extrusion purpose. The proposed constitutive model adopts the von-Mises yield criterion, the associated flow rule and nonlinear strain rate-hardening law. It is found that the predicted flow stresses of the extrudable fresh cementitious paste agree well with experimental results. The rate-form constitutive equations are then integrated into an incremental formulation, which is implemented into a numerical framework based on ANSYS/LS-DYNA finite element code. Then, a series of upsetting and ram extrusion processes are simulated. It is found that the predicted forming load-time data are in good agreement with experimental results, suggesting that the proposed constitutive model could describe the elasto-viscoplastic behavior of the short fiber-reinforced extrudable fresh cementitious paste.

키워드

참고문헌

  1. Adams, M.J., Briscoe, B.J. and Kamjab, M. (1993), "The deformation and flow of highly concentrated dispersions", Adv. Colloid Interfac., 44, 143-182. https://doi.org/10.1016/0001-8686(93)80023-5
  2. Al-Haik, M., Vaghar, M.R., Garmestani, H. and Shahaway, M. (2001), "Viscoplastic analysis of structural polymer composites using stress relaxation and creep data", Compos. Part B, 32(2), 165-170. https://doi.org/10.1016/S1359-8368(00)00042-1
  3. Aldea, C., Marikunte, S. and Shah, S.P. (1998), "Extruded fiber reinforced cement pressure pipes", Adv. Cement Based Mater., 8(2), 47-55. https://doi.org/10.1016/S1065-7355(98)00006-6
  4. Alfani, R., Grizzuti, N., Guerrini, G.L. and Lezzi, G. (2007), "The use of the capillary rheometer for the rheological evaluation of extrudable cement-based materials", Rheologica Acta, 46(5), 703-709. https://doi.org/10.1007/s00397-007-0164-0
  5. Aydin, I., Biglari, F.R., Briscoe, B.J., Lawrence, C.J. and Adams, M.J. (2000), "Physical and numerical modelling of ram extrusion of paste materials: conical die entry case", Comput. Mater. Sci., 18(2), 141-155. https://doi.org/10.1016/S0927-0256(00)00098-7
  6. Belytschko, T., Liu, W.K. and Moran, B. (2000), Nonlinear finite elements for continua and structures, John Wiley & Sons, New York.
  7. Chaboche, J.L. (1989), "Constitutive equations for cyclic plasticity and cyclic viscoplasticity", Int. J. Plasticity, 5(3), 247-302. https://doi.org/10.1016/0749-6419(89)90015-6
  8. Kobayashi, S., Oh, S. and Altan, T. (1989), Metal forming and the finite-element method, Oxford University Press.
  9. Kuder, K.G. and Shah, S.P. (2007a), "Tailoring extruded HPFRCC to be nailable", ACI Mater. J., 104(5), 526- 534.
  10. Kuder, K.G. and Shah, S.P. (2007b), "Rheology of extruded cement-based materials", ACI Mater. J., 104(3), 283- 290.
  11. Li, Zongjin and Li, Xiangyu (2007), "Squeeze flow of viscoplastic cement-based extrudate", J. Eng. Mech. - ASCE, 133(9), 1003-1008. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:9(1003)
  12. Li, Z.J., Mu, B. and Chui, S.N.C. (1999), "Systematic study of properties of extrudates with incorporated metakaolin or silica fume", ACI Mater. J., 96(5), 574-579.
  13. Li, Z.J., Mu, B. and Chui, S.N.C. (2001), "Static and dynamic behavior of extruded sheets with short fibers", J. Mater. Civil Eng. - ASCE, 13(4), 248-254. https://doi.org/10.1061/(ASCE)0899-1561(2001)13:4(248)
  14. Li, Zongjin, Zhou, Xiangming and Shen, Bin (2004), "Fiber-cement extrudates with perlite subjected to high temperatures", J. Mater. Civil Eng. - ASCE, 16(3), 221-229. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:3(221)
  15. Lof, J. (2001), "Elasto-viscoplastic FEM simulations of the aluminium flow in the bearing area for extrusion of thin-walled sections", J. Mater. Process. Tech., 114(2), 174-183. https://doi.org/10.1016/S0924-0136(01)00741-5
  16. Lof, J. and Boogaard, A.H.Van Den (2001), "Adaptive return mapping algorithms for $J_{2}$ elasto-viscoplastic flow", Int. J. Numer. Meth. Eng., 51(11), 1283-1298. https://doi.org/10.1002/nme.203
  17. Ortiz, M. and Popov, E.P. (1985), "Accuracy and stability of integration algorithms for elasto-plastic constitutive relations", Int. J. Numer. Meth. Eng., 21(9), 1561-1576. https://doi.org/10.1002/nme.1620210902
  18. Peled, A. and Shah, S.P. (2003), "Processing effects in cementitious composites: extrusion and casting", J. Mater. Civil Eng. - ASCE, 15(2), 192-199. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:2(192)
  19. Perzyna, P. (1966), Fundamental problems in viscoplasticity, In Kuerti, G. (Eds.), Recent Advances in Applied Mechanics, Academic Press, New York, 9, 243-377.
  20. Ponthot, J.P. (2002), "Unified stress update algorithms for the numerical simulation of large deformation elastoplastic and elasto-viscoplastic processes", Int. J. Plasticity, 18(1), 91-126. https://doi.org/10.1016/S0749-6419(00)00097-8
  21. Qian, X.Q., Zhou, X.M., Mu, B. and Li, Z.J. (2003), "Fiber alignment and property direction dependency of FRC extrudate", Cement Concrete Res., 33(10), 1575-1581. https://doi.org/10.1016/S0008-8846(03)00108-X
  22. Santhanam, S. (2000), "An elastic-viscoplastic constitutive model for hot-forming of aluminum alloys", J. Mater. Sci., 35(14), 3647-3654. https://doi.org/10.1023/A:1004882001651
  23. Shao, Y., Marikunte, S. and Shah, S.P. (1995), "Extruded fiber-reinforced composites", Concrete Int., 17(4), 48-52.
  24. Shao, Y. and Shah, S.P. (1997), "Mechanical properties of PVA fiber reinforced cement composites fabricated by extrusion processing", ACI Mater. J., 94(6), 555-564.
  25. Shen, B., Hubler, M., Paulino, G.H. and Struble, L.J. (2008), "Functionally-graded fiber-reinforced cement composite: processing, microstructure, and properties", Cement Concrete Compos., 30(8), 663-673. https://doi.org/10.1016/j.cemconcomp.2008.02.002
  26. Simo, J.C. and Hughes, T.J.R. (1998), Computational inelasticity, Springer-Verlag.
  27. Srinivasan, R., DeFord, D. and Shah, S.P. (1999), "The use of extrusion rheometry in the development of extruded fiber-reinforced cement composites", Concrete Sci. Eng., 1(1), 26-36.
  28. Toutou, Z., Roussel, N. and Lanos, C. (2005), "The squeeze test: a tool to identify firm cement-based material's rheological behaviour and evaluate their extrusion ability", Cement Concrete Res., 35(10), 1891-1899. https://doi.org/10.1016/j.cemconres.2004.09.007
  29. Wang, W.M., Sluys L.J. and De Borst, R. (1997), "Viscoplasticity for instabilities due to strain softening and strain-rate softening", Int. J. Numer. Meth. Eng., 40(20), 3839-3864. https://doi.org/10.1002/(SICI)1097-0207(19971030)40:20<3839::AID-NME245>3.0.CO;2-6
  30. Zhou, X. and Li, Z. (2005a), "Characterization of rheology of fresh fiber reinforced cementitious composites through ram extrusion", Mater. Struct., 38(1), 17-24. https://doi.org/10.1007/BF02480570
  31. Zhou, Xiangming and Li, Zongjin (2005b), "Characterizing rheology of fresh short fiber reinforced cementitious composite through capillary extrusion", J. Mater. Civil Eng. - ASCE, 17(1), 28-35. https://doi.org/10.1061/(ASCE)0899-1561(2005)17:1(28)
  32. Zhou, Xiangming and Li, Zongjin (2006), "Upsetting tests of fresh cementitious composites for extrusion", J. Eng. Mech. - ASCE, 132(2), 149-157. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:2(149)

피인용 문헌

  1. Rheology of semi-solid fresh cement pastes and mortars in orifice extrusion vol.37, 2013, https://doi.org/10.1016/j.cemconcomp.2013.01.004
  2. Manufacturing cement-based materials and building products via extrusion: from laboratory to factory vol.168, pp.6, 2015, https://doi.org/10.1680/cien.14.00065
  3. A comparative analysis of sheeting die geometries using numerical simulations vol.5, pp.2, 2020, https://doi.org/10.12989/acd.2020.5.2.111