DOI QR코드

DOI QR Code

Wind profile management and blockage assessment for a new 12-fan Wall of Wind facility at FIU

  • Aly, Aly Mousaad (Department of Mechanical Engineering, Alexandria University) ;
  • Chowdhury, Arindam Gan (Laboratory for Wind Engineering Research, International Hurricane Research Center, Department of Civil and Environmental Engineering, Florida International University) ;
  • Bitsuamlak, Girma (Laboratory for Wind Engineering Research, International Hurricane Research Center, Department of Civil and Environmental Engineering, Florida International University)
  • 투고 : 2010.03.25
  • 심사 : 2010.12.17
  • 발행 : 2011.07.25

초록

Researchers at the International Hurricane Research Center (IHRC), Florida International University (FIU), are working in stages on the construction of a large state-of-the-art Wall of Wind (WoW) facility to support research in the area of Wind Engineering. In this paper, the challenges of simulating hurricane winds for the WoW are presented and investigated based on a scale model study. Three wind profiles were simulated using airfoils, and/or adjustable planks mechanism with and without grids. Evaluations of flow characteristics were performed in order to enhance the WoW's flow simulation capabilities. Characteristics of the simulated wind fields are compared to the results obtained from a study using computational fluid dynamics (CFD) and also validated via pressure measurements on small-scale models of the Silsoe cube building. Optimal scale of the test model and its optimal distance from the WoW contraction exit are determined - which are two important aspects for testing using an open jet facility such as the WoW. The main objective of this study is to further the understanding of the WoW capabilities and the characteristics of its test section by means of intensive tests and validations at small scale in order to apply this knowledge to the design of the full-scale WoW and for future wind engineering testing.

키워드

참고문헌

  1. American Society of Civil Engineers (2005), Minimum design loads for buildings and other structures, ASCE Standard, ASCE/SEI 7-05, American Society of Civil Engineers, New York.
  2. Aly, A.M., Bitsuamlak, G. and Gan Chowdhury, A. (2011), "Florida International University's Wall of Wind: a tool for improving construction materials and methods for hurricane-prone regions", Proceedings of the International Conference on Vulnerability and Risk Analysis and Management (ICVRAM), University of Maryland, Hyattsville, MD, USA 2011.DOI: 10.1061/41170(400)43.
  3. Aly, A.M., Bitsuamlak, G., Gan Chowdhury, A. and Erwin J. (2010), "Design and fabrication of a new open jet electric-fan Wall of Wind facility for coastal research", Manuscript accepted for publication in Coastal Hazards, a book to be published by ASCE-EMI.
  4. Aly, A.M. (2009), "On the dynamics of buildings under winds and earthquakes: response prediction and Reduction", Ph.D. Dissertation, Department of Mechanical Systems Engineering, Politecnico di Milano, Milan, Italy.
  5. Bitsuamlak, G.T., Gan Chowdhury, A. and Sambare, D. (2009), "Application of a full-scale testing facility for assessing wind-driven-rain intrusion", Build. Environ., 44(12), 2430-2441. https://doi.org/10.1016/j.buildenv.2009.04.009
  6. Bitsuamlak, G., Dagnew, A. and Gan Chowdhury, A. (2010), "Computational assessment of blockage and wind simulator proximity effects for a new full-scale testing facility", Wind Struct., 13(1), 21-36. https://doi.org/10.12989/was.2010.13.1.021
  7. Gan Chowdhury, A. and Sarkar, P.P. (2003). "A new technique for identification of eighteen flutter derivatives using three-degree-of-freedom section model", Eng. Struct., 25(14), 1763-1772. https://doi.org/10.1016/j.engstruct.2003.07.002
  8. Gan Chowdhury, A., Simiu, E. and Leatherman, S.P. (2009), "Destructive testing under simulated hurricane effects to promote hazard mitigation", Nat. Hazards Review J. ASCE, 10(1), 1-10. https://doi.org/10.1061/(ASCE)1527-6988(2009)10:1(1)
  9. Gan Chowdhury, A., Bitsuamlak, G., Simiu, E. (2010), "Aerodynamic, hydro-aerodynamic, and destructive testing", J. ICE Struct. Build., 163(2), 137-147. https://doi.org/10.1680/stbu.2010.163.2.137
  10. Emanuel, K. (2005), "Increasing destructiveness of tropical cyclones over the past 30 years", Nature, 436(7051), 686-688. https://doi.org/10.1038/nature03906
  11. Fu, T.C., Aly, A.M., Gan Chowdhury, A., Bitsuamlak, G., Yeo, D.H. and Simiu, E. (2011), "A proposed technique for determining aerodynamic pressures on residential homes", Wind Struct. (In Press)
  12. Holmes, D.J. (2001), Wind Loading of Structures, Spon Press, London.
  13. Huang, P., Gan Chowdhury, A., Bitsuamlak, G. and Liu, R. (2009), "Development of devices and methods for simulation of hurricane winds in a full-scale testing facility", Wind Struct., 12(2), 151-177. https://doi.org/10.12989/was.2009.12.2.151
  14. Leatherman, S.P., Gan Chowdhury, A. and Robertson C.J. (2007), "Wall of Wind full-scale destructive testing of coastal houses and hurricane damage mitigation", J. Coastal Res., 23(5), 1211-1217.
  15. Masters, F.J. (2004), "Measurement, modeling and simulation of ground-level tropical cyclone winds", PhD Dissertation, University of Florida, Department of Civil and Coastal Engineering.
  16. Murakami, S. and Mochida, A. (1990), "3-D numerical simulation of airflow around a cubic model by means of 16 Aly Mousaad Aly, Arindam Gan Chowdhury and Girma Bitsuamlak the k-$\varepsilon$ model", J. Wind Eng. Ind. Aerod., 31(2-3), 283-303.
  17. National Science Board (2007), "Hurricane warning: the critical need for a national hurricane research initiative", NSB-06-115, 1-36.
  18. Openfoam (2010), http://www.opencfd.co.uk.
  19. Paraview (2010), http://www.paraview.org.
  20. Pielke, R.A., Jr., Gratz J., Landsea, C.W., Collins, D., Saunders, M.A. and Musulin, R. (2008), "Normalized hurricane damage in the United States: 1900-2005", Nat. Hazards Review J. ASCE, 9(1), 29-42. https://doi.org/10.1061/(ASCE)1527-6988(2008)9:1(29)
  21. Richards, P.J., Hoxey, R.P. and Short, L.J. (2001), "Wind pressures on a 6 m cube", J. Wind Eng. Ind. Aerod., 89, 1553-1564. https://doi.org/10.1016/S0167-6105(01)00139-8
  22. Yu B. (2007), "Surface mean flow and turbulence structure in tropical cyclone winds", Ph.D. dissertation, Florida International University: Miami (FL), 2007.
  23. Yu, B., Gan Chowdhury, A. and Masters, F.J. (2008), "Hurricane power spectra, co-spectra, and integral length scales", Bound-Lay Meteorol., 129(3), 411-430. https://doi.org/10.1007/s10546-008-9316-8

피인용 문헌

  1. LES modelling of unsteady flow around the Silsoe cube vol.144, 2015, https://doi.org/10.1016/j.jweia.2015.03.018
  2. An experimental study to assess the effect of soffit louvered vents on wind loads and wind driven rain intrusion on low rise buildings vol.34, 2017, https://doi.org/10.1016/j.scs.2017.06.005
  3. Large-Scale Experimentation Using the 12-Fan Wall of Wind to Assess and Mitigate Hurricane Wind and Rain Impacts on Buildings and Infrastructure Systems vol.143, pp.7, 2017, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001785
  4. Simplified Wind Flow Model for the Estimation of Aerodynamic Effects on Small Structures vol.139, pp.3, 2013, https://doi.org/10.1061/(ASCE)EM.1943-7889.0000508
  5. Distribution of wind-driven rain deposition on low-rise buildings: Direct impinging raindrops versus surface runoff vol.133, 2014, https://doi.org/10.1016/j.jweia.2014.06.023
  6. State of the Art of Hurricane Vulnerability Estimation Methods: A Review vol.16, pp.2, 2015, https://doi.org/10.1061/(ASCE)NH.1527-6996.0000153
  7. Aerodynamics of ground-mounted solar panels: Test model scale effects vol.123, 2013, https://doi.org/10.1016/j.jweia.2013.07.007
  8. Simulation of wind-driven rain associated with tropical storms and hurricanes using the 12-fan Wall of Wind vol.76, 2014, https://doi.org/10.1016/j.buildenv.2014.03.002
  9. Towards guidelines for design of loose-laid roof pavers for wind uplift vol.22, pp.2, 2016, https://doi.org/10.12989/was.2016.22.2.133
  10. Proposed robust tuned mass damper for response mitigation in buildings exposed to multidirectional wind vol.23, pp.9, 2014, https://doi.org/10.1002/tal.1068
  11. Partial turbulence simulation and aerodynamic pressures validation for an open-jet testing facility vol.19, pp.1, 2014, https://doi.org/10.12989/was.2014.19.1.015
  12. Wind loading on trees integrated with a building envelope vol.17, pp.1, 2013, https://doi.org/10.12989/was.2013.17.1.069
  13. Wind loads on residential scale rooftop photovoltaic panels vol.168, 2017, https://doi.org/10.1016/j.jweia.2017.06.006
  14. Wind Effects on Roofs with High-Profile Tiles: Experimental Study vol.20, pp.4, 2014, https://doi.org/10.1061/(ASCE)AE.1943-5568.0000156
  15. Influence of Turbulence, Orientation, and Site Configuration on the Response of Buildings to Extreme Wind vol.2014, 2014, https://doi.org/10.1155/2014/178465
  16. Retrofitting building roofs with aerodynamic features and solar panels to reduce hurricane damage and enhance eco-friendly energy production vol.35, 2017, https://doi.org/10.1016/j.scs.2017.09.002
  17. Atmospheric boundary-layer simulation for the built environment: Past, present and future vol.75, 2014, https://doi.org/10.1016/j.buildenv.2014.02.004
  18. Estimation of Wind-Driven Rain Intrusion through Building Envelope Defects and Breaches during Tropical Cyclones vol.16, pp.2, 2015, https://doi.org/10.1061/(ASCE)NH.1527-6996.0000158
  19. Full-scale aerodynamic testing of a loose concrete roof paver system vol.44, 2012, https://doi.org/10.1016/j.engstruct.2012.05.008
  20. Atmospheric boundary layer simulation in a new open-jet facility at LSU: CFD and experimental investigations vol.110, 2017, https://doi.org/10.1016/j.measurement.2017.06.027
  21. A review of wood-frame low-rise building performance study under hurricane winds vol.141, 2017, https://doi.org/10.1016/j.engstruct.2017.03.036
  22. Internal pressure in a low-rise building with existing envelope openings and sudden breaching vol.16, pp.1, 2013, https://doi.org/10.12989/was.2013.16.1.025
  23. Full-scale testing of low-rise, residential buildings with realistic wind loads vol.104-106, 2012, https://doi.org/10.1016/j.jweia.2012.01.004
  24. Wind-Loading Effects on Roof-to-Wall Connections of Timber Residential Buildings vol.139, pp.3, 2013, https://doi.org/10.1061/(ASCE)EM.1943-7889.0000512
  25. Full-scale testing to evaluate the performance of standing seam metal roofs under simulated wind loading vol.105, 2015, https://doi.org/10.1016/j.engstruct.2015.10.006
  26. Influence of elevated water levels on wind field characteristics at a bridge site pp.2048-4011, 2019, https://doi.org/10.1177/1369433218825048
  27. Open-jet boundary-layer processes for aerodynamic testing of low-rise buildings vol.25, pp.3, 2017, https://doi.org/10.12989/was.2017.25.3.233
  28. Aerodynamic Mitigation of Wind Uplift on Low-Rise Building Roof Using Large-Scale Testing vol.5, pp.None, 2011, https://doi.org/10.3389/fbuil.2019.00149
  29. Automated BIM-based process for wind engineering design collaboration vol.13, pp.2, 2020, https://doi.org/10.1007/s12273-019-0589-2
  30. Flow-conditioning of a subsonic wind tunnel to model boundary layer flows vol.30, pp.4, 2011, https://doi.org/10.12989/was.2020.30.4.339