Smart Structures and Systems

  • 제7권4호
  • /
  • Pages.303-317
  • /
  • 2011
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Monitoring of tension force and load transfer of ground anchor by using optical FBG sensors embedded tendon

  • Kim, Young-Sang (Department of Marine & Civil Engineering, Chonnam National University) ;
  • Sung, Hyun-Jong (Department of Marine & Civil Engineering, Chonnam National University) ;
  • Kim, Hyun-Woo (Department of Marine & Civil Engineering, Chonnam National University) ;
  • Kim, Jae-Min (Department of Marine & Civil Engineering, Chonnam National University)
  • 투고 : 2010.07.03
  • 심사 : 2010.11.04
  • 발행 : 2011.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

A specially designed tendon, which is proposed by embedding an FBG sensor into the center king cable of a 7-wire strand tendon, was applied to monitor the prestress force and load transfer of ground anchor. A series of tensile tests and a model pullout test were performed to verify the feasibility of the proposed smart tendon as a measuring sensor of tension force and load transfer along the tendon. The smart tendon has proven to be very effective for monitoring prestress force and load transfer by measuring the strain change of the tendon at the free part and the fixed part of ground anchor, respectively. Two 11.5 m long proto-type ground anchors were made simply by replacing a tendon with the proposed smart tendon and prestress forces of each anchor were monitored during the loading-unloading step using both FBG sensor embedded in the smart tendon and the conventional load cell. By comparing the prestress forces measured by the smart tendon and load cell, it was found that the prestress force monitored from the FBG sensor located at the free part is comparable to that measured from the conventional load cell. Furthermore, the load transfer of prestressing force at the tendon-grout interface was clearly measured from the FBGs distributed along the fixed part. From these pullout tests, the proposed smart tendon is not only expected to be an alternative monitoring tool for measuring prestress force from the introducing stage to the long-term period for health monitoring of the ground anchor but also can be used to improve design practice through determining the economic fixed length by practically measuring the load transfer depth.

키워드

과제정보

연구 과제 주관 기관 : Korea Science Engineering Foundation (KOSEF), Natural Hazard Mitigation Research Group

참고문헌

  1. Aalami, B.O. (1998), "Time-dependent analysis of post-tensioned concrete structures", Prog. Struct. Eng. Mat., 1(4), 384-391. https://doi.org/10.1002/pse.2260010407
  2. Aydan, O., Ebisu, S. and Komura, S. (1993), "Pull-out tests of rock anchors and their failure modes", Proceedings of the Int. Symp. On Assessment and Prevention of Failure Phenomena in Rock Engineering, Istanbul, Turkey.
  3. Aydan, O., Komura, S., Ebisu, S. and Kawamato, T. (1995), "A unified design method for anchor foundations of super-high pylons", Proceedings of the Int. Symp. Workshop on Rock Foundation, Tokyo, Japan.
  4. Brady, K. and Bush, D. (2001), "The performance of load cells used for ground anchors", Proceedings of the 15th ICSMGE, Istanbul, Turkey.
  5. Bruce, S.M., McCarten, P.S., Freitag, S.A. and Hasson, L.M. (2008), "Deterioration of prestressed concrete bridge beams", Research Report 337, Land Transport, New Zealand.
  6. Calvert, S. and Mooney, J. (2004), "Bridge structural health monitoring system using fiber grating sensors: development and preparation for a permanent installation", Proceedings of the SPIE.
  7. Georgiades, A.V., Saha, G.C., Kalamkarov, A.L., Rokkam, S.K., Newhook, J.P. and Challagulla, K.S. (2005), "Embedded smart GFRP reinforcements for monitoring reinforced concrete flexural components", Smart Struct. Syst., 1(4), 369-384. https://doi.org/10.12989/sss.2005.1.4.369
  8. Farmer, I.W. (1975), "Stress distribution along a resin grouted rock anchor", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 12(11), 347-351. https://doi.org/10.1016/0148-9062(75)90168-0
  9. Fricker, S. and Vogel, T. (2006), "Detecting wire breaks in a prestressed concrete road bridge with continuous acoustic monitoring", Proceedings of the 3rd Int. Conf. on Bridge Maintenance, Safety and Management, Porto, Portugal.
  10. Inaudi, D. (2000), "Application of civil structural monitoring in Europe using fiber optic sensors", Prog. Struct. Eng. Mat., 2(3), 351-358. https://doi.org/10.1002/1528-2716(200007/09)2:3<351::AID-PSE41>3.0.CO;2-5
  11. Kesavan, K., Ravisankar, K., Parivallal, S. and Sreeshylam, P. (2005), "Applications of fiber optic sensors for structural health monitoring", Smart Struct. Syst., 1(4), 355-368. https://doi.org/10.12989/sss.2005.1.4.355
  12. Kim, J.T., Park, J.H., Hong, D.S., Cho, H.M., Na, W.B. and Yi, J.H. (2009), "Vibration and impedance monitoring for prestress-loss prediction in PSC girder bridges", Smart Struct. Syst., 5(1), 81-94. https://doi.org/10.12989/sss.2009.5.1.081
  13. Kim, Y.S., Kim, J.M., Suh, D.N., Sung, H.J. and Lee, S.L. (2009), "Measurement of load transfer between anchor and grout using optical FBG sensors embedded smart tendon", Safety, Reliability and Risk of Struct., Infrastructures and Engineering Systems, Fruta, (Eds. Frangopol and Shinozuka), Taylor & Francis Group, London.
  14. Lakshmanan, N., Saibabu, S., Murthy, A.R.C., Ganapathi, S.C. and Jayaraman, R. (2009), "Experimental, numerical and analytical studies on a novel external prestressing technique for concrete structural components", Comput. Concrete., 6(1), 41-57. https://doi.org/10.12989/cac.2009.6.1.041
  15. Lau, K.T. (2003), "Fibre-optic sensors and smart composites for concrete applications", Mag. Concrete. Res., 55(1), 19-34. https://doi.org/10.1680/macr.2003.55.1.19
  16. Li, E., Xi, J., Chicharo, J., Liu, T., Li, X., Jiang, J., Li, L., Wang, Y. and Zhang, Y. (2005), "The experimental evaluation of FBG sensor for strain measurement of prestressed steel strand", Proceedings of the SPIE, 5649.
  17. Meissner, J., Nowak, W., Slowik, V. and Klink, T. (1997), "Strain monitoring at a prestressed concrete bridge", Proceedings of the Optical Fiber Sensors, Williamsburg, Virginia, October.
  18. Moerman, W., Taerwe, L., Waele, W. D, Degrieck, J. and Himpe, J. (2005), "Measuring ground anchor forces of a quay wall with bragg sensors", J. Struct. Eng.-ASCE, 131(2), 322-328. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:2(322)
  19. Nellen, P.M., Anderegg, P., Bronnimann, R., Meier, U. and Sennhauser, U. (1999a), "Fiber optical Bragg grating embedded in CFRP wires", Proceedings of the SPIE, 3870.
  20. Nellen, P.M., Bronnimann, R., Frank, A., Mauron, P. and Sennhauser, U. (1999b), "Structurally embedded fiber Bragg gratings: civil engineering application", Proceedings of the SPIE, 3860.
  21. Onyemelukwe, O. and Kunnath, S. (1997), "Field measurement and evaluation of time-dependent losses in prestressed concrete bridges", Research Report.
  22. Othonos, A. and Kalli, K. (1999), Fiber Bragg Gratings, Artech House, London.
  23. Ren, L., Li, N.H., Sun, L. and Li, D.S. (2005), "Development of tube-packaged FBG strain sensor and application in the vibration experiment of submarine pipeline model", Proceedings of the SPIE, 5770.
  24. Samwoo Geotechnical Co. Ltd, http://www.swanchor.com
  25. Shenoy, C.V. and Frantz, G.C. (1991), "Structural tests of 27-year-old prestressed concrete bridge beams", PCI J., 80-90.
  26. Talebinejad, I., Fischer, C. and Ansari, F. (2009), "Serially multiplexed FBG accelerometer for structural health monitoring of bridges", Smart Struct. Syst., 5(4), 345-355. https://doi.org/10.12989/sss.2009.5.4.345
  27. Udd, E. (1995), "Fiber Optic Smart Structure", John Wiley & Sons, Inc.
  28. Vurpillot, S., Inaudi, D. and Ducret, J.M. (1996), "Bridge monitoring by fiber optic deformation sensors: design, emplacement and results", Proceedings of the SPIE, Smart Struct. Mat., San Diego.
  29. Wang, M. L. (2008), "Long term health monitoring of post-tensioning box girder bridges", Smart Struct. Syst., 4(6), 711-726. https://doi.org/10.12989/sss.2008.4.6.711
  30. Won, S.Y., Cho, N.J. and Hwang, S.I. (2001), "Stress Distribution of Ground Rock Anchors", J. KSCE, 21(3), 257-266.
  31. Youn, S.G. and Kim, E.K. (2006), "Deterioration of bonded post-tensioned concrete bridges and research topics on the strength evaluation in ISARC", Proceedings of the JSCE-KSCE Joint Sem. on Maint. & Mana. Strategy of Infrastruct. in Japan and Korea, Kusatsu, Shiga, Japan, September
  32. Zhou. Z., Thomas W.G., Luke Hsu and Ou, J.P. (2003), "Techniques of advanced FBG sensors: fabrication, demodulation, encapsulation and their application in the structural health monitoring of bridges", Pacific Sci. Review, 5, 116-121

피인용 문헌

  1. Comparative Field Study of Cable Tension Measurement for a Cable-Stayed Bridge vol.18, pp.8, 2013, https://doi.org/10.1061/(ASCE)BE.1943-5592.0000421
  2. Quantification of temperature effect on impedance monitoring via PZT interface for prestressed tendon anchorage vol.26, pp.12, 2017, https://doi.org/10.1088/1361-665X/aa931b
  3. FOS-Based Prestress Force Monitoring and Temperature Effect Estimation in Unbonded Tendons of PSC Girders vol.30, pp.2, 2017, https://doi.org/10.1061/(ASCE)AS.1943-5525.0000608
  4. Structural Health Monitoring of Civil Infrastructure Using Optical Fiber Sensing Technology: A Comprehensive Review vol.2014, 2014, https://doi.org/10.1155/2014/652329
  5. Enhanced Strain Measurement Range of an FBG Sensor Embedded in Seven-Wire Steel Strands vol.17, pp.7, 2017, https://doi.org/10.3390/s17071654
  6. Long-Term In-Service Monitoring and Performance Assessment of the Main Cables of Long-Span Suspension Bridges vol.17, pp.6, 2017, https://doi.org/10.3390/s17061414
  7. Temperature Compensation of Optical FBG Sensors Embedded Tendon for Long-term Monitoring of Tension Force of Ground Anchor vol.28, pp.5, 2012, https://doi.org/10.7843/kgs.2012.28.5.13
  8. A Practical Monitoring System for the Structural Safety of Mega-Trusses Using Wireless Vibrating Wire Strain Gauges vol.13, pp.12, 2013, https://doi.org/10.3390/s131217346
  9. Prediction of load transfer depth for cost-effective design of ground anchors using FBG sensors embedded tendon and numerical analysis vol.10, pp.6, 2016, https://doi.org/10.12989/gae.2016.10.6.737
  10. Fatigue performance monitoring of full-scale PPC beams by using the FBG sensors vol.13, pp.6, 2014, https://doi.org/10.12989/sss.2014.13.6.943
  11. Review: optical fiber sensors for civil engineering applications vol.48, pp.4, 2015, https://doi.org/10.1617/s11527-013-0201-7
  12. A Sensor-Type PC Strand with an Embedded FBG Sensor for Monitoring Prestress Forces vol.15, pp.12, 2015, https://doi.org/10.3390/s150101060
  13. Recent progress of using Brillouin distributed fiber optic sensors for geotechnical health monitoring vol.258, 2017, https://doi.org/10.1016/j.sna.2017.03.017
  14. Quantitative Sensitivity Analysis of Surface Attached Optical Fiber Strain Sensor vol.14, pp.6, 2014, https://doi.org/10.1109/JSEN.2014.2303145
  15. Measurement of Prestressing Force in Pretensioned UHPC Deck Using a Fiber Optic FBG Sensor Embedded in a 7-Wire Strand vol.2016, 2016, https://doi.org/10.1155/2016/8634080
  16. Strain Measurement Distributed on a Ground Anchor Bearing Plate by Fiber Optic OFDR Sensor vol.8, pp.11, 2018, https://doi.org/10.3390/app8112051
  17. A monitoring and warning system for expressway slopes using FBG sensing technology vol.14, pp.5, 2018, https://doi.org/10.1177/1550147718776228
  18. Long-term monitoring of ground anchor tensile forces by FBG sensors embedded tendon vol.19, pp.3, 2011, https://doi.org/10.12989/sss.2017.19.3.269
  19. Pullout Behavior of GFRP Anti-Floating Anchor Based on the FBG Sensor Technology vol.2018, pp.None, 2011, https://doi.org/10.1155/2018/6424791
  20. A Highly Integrated BOTDA/XFG Sensor on a Single Fiber for Simultaneous Multi-Parameter Monitoring of Slopes vol.19, pp.9, 2019, https://doi.org/10.3390/s19092132
  21. Fiber Bragg Grating-Differential Settlement Measurement System for Bridge Displacement Monitoring: Case Study vol.24, pp.10, 2019, https://doi.org/10.1061/(asce)be.1943-5592.0001470
  22. Load-bearing characteristics of fibreglass uplift anchors in weathered rock vol.173, pp.1, 2020, https://doi.org/10.1680/jgeen.18.00195
  23. Identification of instantaneous tension of bridge cables from dynamic responses: STRICT algorithm and applications vol.142, pp.None, 2011, https://doi.org/10.1016/j.ymssp.2020.106729
  24. Cable force estimation of a long‐span cable‐stayed bridge with microwave interferometric radar vol.35, pp.12, 2011, https://doi.org/10.1111/mice.12557
  25. A Technic for Ground Anchor Force Determination from Distributied Strain Using Fiber Optic OFDR Sensor with the Rejection of a Temperature Effect vol.10, pp.23, 2020, https://doi.org/10.3390/app10238437
  26. Analytical Calculation of Critical Anchoring Length of Steel Bar and GFRP Antifloating Anchors in Rock Foundation vol.2021, pp.None, 2011, https://doi.org/10.1155/2021/7838042
  27. Analysis of Re-Tensioning Time of Anchor Cable Based on New Prestress Loss Model vol.9, pp.10, 2011, https://doi.org/10.3390/math9101094
  28. Anchor Force Monitoring Using Impedance Technique with Single-Point Mount Lead-Zirconate-Titanate Interface: A Feasibility Study vol.11, pp.9, 2011, https://doi.org/10.3390/buildings11090382
  29. A Low-Cost Prestress Monitoring Method for Post-Tensioned RC Beam Using Piezoelectric-Based Smart Strand vol.11, pp.10, 2011, https://doi.org/10.3390/buildings11100431