Structural Engineering and Mechanics

  • 제40권6호
  • /
  • Pages.801-811
  • /
  • 2011
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A new experimental technique on the tubular joints of spatial grid structures

  • Chen, Zhi-Hua (School of Civil Engineering, Tianjin University) ;
  • Sun, Guo-Jun (School of Civil Engineering, Tianjin University) ;
  • Luo, Zhi-Shan (School of Civil Engineering, Tianjin University)
  • 투고 : 2010.04.10
  • 심사 : 2011.11.02
  • 발행 : 2011.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

A new experimental technique was developed on the plate-inserted welded tubular joints of spatial grid structures. In the experimental technique, a microcomputer controlling instrument of moire intervention (MCIMI) was adopted. A test was designed on the plate-inserted welded tubular joints of spatial grid structures to show the effectiveness of the MCIMI technique. Both traditional electrical measuring technique and MCIMI technique were employed in the test. The test results showed that the MCIMI technique was feasible in the case of the complicated tests on steel structures. The MCIMI technique not only implemented the limitation of traditional electrical measuring technique, but also improved the accuracy of the test. According to the test results, we further examined the plate-inserted welded tubular joints in the cable-stayed spatial grids of the Binhai International Convention & Exhibition in Tianjin, China. The analysis showed the joints are safely designed with adequate conservatism. The research provided a new application of MCIMI in the field of large-scale structure engineering.

키워드

참고문헌

  1. Chen, Z.H. and He, C.Y. (2008), "Study on the key technologies of design and construction of folded plate cable-stayed space truss structure", Industr. Constr. Suppl., 1082-1086.
  2. Cordero, R.R., Francois, M., Lira, I. and Vial-Edwards, C. (2005), "Whole-field analysis of uniaxial tensile tests by Moire' interferometry", Optics Las. Eng., 43(9), 919-936. https://doi.org/10.1016/j.optlaseng.2004.10.002
  3. Fellows, L.J. and Nowell, D. (2004), "Crack closure measurements using Moire' interferometry with photoresist gratings", Int. J. Fatigue, 26(10), 1075-1082. https://doi.org/10.1016/j.ijfatigue.2004.03.004
  4. Hoona, K.H., Wong, L.K. and Soh, A.K. (2001), "Experimental investigation of a double-plate reinforced tubular T-joint subjected to combined loadings", J. Construct. Steel Res., 57(9), 1015-1039. https://doi.org/10.1016/S0143-974X(01)00023-2
  5. Lee, M.M.K. and Wilmshurst, S.R. (1997), "Strength of multiplanar KK-joint under anti-symmetrical loading", J. Struct. Eng. ASCE, 123(6), 755-64. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:6(755)
  6. Liu, J., Luo, Z.S. and Zhang, X.S. (2003), "New computer adjusted-and-processing moire interferometer's applied research to mechanical property measure of concrete", ISTM/2003, 5th International Symposium on Test Measurement, 4, International Academic Publishers World Publishing Corporation.
  7. Luo, Z.S., Yuan, F.X. and Zhang, G.Q. (1990) "Moire interferometry of sticking film", Acta Mechanica Sinica, 22(1), 116-123.
  8. Luo, Z.S., Zhang, G.Q., Mu, Z.X. et al. (1996), "Ultra-high sensitivity more interferometry by the aid of electronic-liguid phase-shifter and computer", Proceeding of VIII International Conference on Experimental Mechanics, 471-474.
  9. Luo, Z.S., Zhang, G.Q., Mu, Z.X., Su, F. and Sun, L.W. (1997), "Txmoire Interferometry for subdynamic tests in normal linght environment and its research of application", Chinese J. Mech. Eng., 4, 38-42.
  10. Post, D. (1983), "Advance of moire intervention measurement", Adv. Mech., 03:351-361.
  11. Ramulua, M., Labossiereb, P. and Greenwel, T. (2010) "Elastic-plastic stress/strain response of friction stirwelded titanium butt joints using moire interferometry'', Optics Las. Eng., 48(03), 385-392. https://doi.org/10.1016/j.optlaseng.2009.10.003
  12. Scola, S., Redwood, R.G. and Mitri, H.S. (1990), "Behaviour of axially loaded tubular V - joints", J. Construct. Steel Res., 16, 89-109. https://doi.org/10.1016/0143-974X(90)90015-9
  13. Van der Valk, C.A.C. (1991), "New aspects related to the ultimate strength of tubular K- and X-joints", Proceedings of the 10th Offshore Mechanics and Arctic Engineering Conference, Stavanger (Norway), III-B, 417-422.
  14. Wingerde, A.M., Packer, J.A. and Wardenier, J. (2001), "Simplified SCF formulae and graphs for CHS and RHS K-and KK-connections", J. Construct. Steel Res., 57, 221-252. https://doi.org/10.1016/S0143-974X(00)00015-8