Structural Engineering and Mechanics

  • 제40권5호
  • /
  • Pages.637-654
  • /
  • 2011
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Free vibration of a rectangular plate with an attached three-degree-of-freedom spring-mass system

  • Febbo, M. (Institute of Applied Mechanics, (IMA), Department of Physics, Universidad Nacional del Sur (UNS), CONICET Avda.) ;
  • Bambill, D.V. (Institute of Applied Mechanics, (IMA), Department of Engineering, Universidad Nacional del Sur (UNS), CONICET Avda.) ;
  • Rossi, R.E. (Institute of Applied Mechanics, (IMA), Department of Engineering, Universidad Nacional del Sur (UNS), CONICET Avda.)
  • 투고 : 2010.07.08
  • 심사 : 2011.10.11
  • 발행 : 2011.12.10
⟨ 이전 논문 다음 논문 ⟩

초록

The present paper studies the variation of the natural frequencies and mode shapes of rectangular plates carrying a three degree-of-freedom spring-mass system (subsystem), when the subsystem changes (stiffness, mass, moment of inertia, location). An analytical approach based on Lagrange multipliers as well as a finite element formulation are employed and compared. Numerically reliable results are presented for the first time, illustrating the convenience of using the present analytical method which requires only the solution of a linear eigenvalue problem. Results obtained through the variation of the mass, stiffness and moment of inertia of the 3-DOF system can be understood under the effective mass concept or Rayleigh's statement. The analysis of frequency values of the whole system, when the 3-DOF system approaches or moves away from the center, shows that the variations depend on each particular mode of vibration. When the 3-DOF system is placed in the center of the plate, "new" modes are found to be a combination of the subsystem's modes (two rotations, traslation) and the bare plate's modes that possess the same symmetry. This situation no longer exists as the 3-DOF system moves away from the center of the plate, since different bare plate's modes enable distinct motions of the 3-DOF system contributing differently to the "new' modes as its location is modified. Also the natural frequencies of the compound system are nearly uncoupled have been calculated by means of a first order eigenvalue perturbation analysis.

키워드

참고문헌

  1. ALGOR V.20.3 (2007), Linear Mode Shapes and Natural Frequencies Module.
  2. Avalos, D.R., Larrondo, H.A. and Laura, P.A.A. (1994), "Transverse vibration of a circular plate carrying an elastically mounted mass", J. Sound Vib., 177, 251-258. https://doi.org/10.1006/jsvi.1994.1431
  3. Bambill, D.V., Felix, D.H. and Rossit, CA. (2006), "Natural frequencies of thin rectangular plates with holes or orthotropic patches carrying an elastically mounted mass", Int. J. Solids Struct., 43, 4116-4135. https://doi.org/10.1016/j.ijsolstr.2005.03.051
  4. Cha, P.D. (2007), "Free vibration of a uniform beam with multiple elastically mounted two-degree-of-freedom systems', J. Sound Vib., 307, 386-392. https://doi.org/10.1016/j.jsv.2007.06.063
  5. de Veubeke, B.F. (1968), "A conforming finite element for plate bending", Int. J. Solids Struct., 4, 95-108. https://doi.org/10.1016/0020-7683(68)90035-8
  6. Dowell, E.H. (1979), "On some general properties of combined dynamical system', J. Appl. Mech., 46, 206-209. https://doi.org/10.1115/1.3424499
  7. Gurgoze, M. (2005), "On the representation of a cantilevered beam carrying a tip mass by an equivalent spring?mass system", J. Sound Vib., 282, 538-542. https://doi.org/10.1016/j.jsv.2004.04.006
  8. Inman, D.J. (2006), Vibration with Control, John Wiley and Sons, NY.
  9. Jen, M.U. and Magrab, E.B. (1993), "Natural frequencies and mode shapes of beams carrying a two degree of freedom spring-mass system", J. Vib. Acoust., 115, 202-209. https://doi.org/10.1115/1.2930331
  10. Leissa, A.W. (1993), Vibration of Plates, Acoustical Society of America, Ohio.
  11. Li, W.L. and Daniels, M. (2002), "A Fourier series method for the vibrations of elastically restrained plates arbitrarily loaded with springs and masses", J. Sound Vib., 252, 768-781. https://doi.org/10.1006/jsvi.2001.3990
  12. Low, K. H. (2003), "Frequencies of beams carrying multiple masses: Raleigh estimation versus eigenanalysis solutions", J. Sound Vib., 268(3), 843-853. https://doi.org/10.1016/S0022-460X(03)00282-7
  13. Mermerta, V. and Gurgoze, M. (2004), "Preservation of the fundamental natural frequencies of rectangular plates with mass and spring modifications", J. Sound Vib., 276, 440-448. https://doi.org/10.1016/j.jsv.2003.10.044
  14. Meirovitch, L. (1998), Methods of Analytical Dynamics, Dover Publications, Mineola, NY.
  15. Rayleigh, L. (1945), The Theory of Sound, Vol. I, Dover Publications, NY.
  16. Rossit, C.A. and Laura, P.A.A. (2001), "Transverse, normal modes of vibration of a cantilever Timoshenko beam with a mass elastically mounted at the free end", J. Acoust. Society Am., 100, 2837-2840.
  17. Rossit, C.A. and Ciancio, P.M. (2008), "Free vibrations of anisotropic rectangular plates with holes and attached masses", Struct. Eng. Mech., 28(1), 53-67. https://doi.org/10.12989/sem.2008.28.1.053
  18. Vera, S.A., Febbo, M., Mendez, C.G. and Paz, R. (2005), "Vibrations of plate with an attached two degree of freedom system", J. Sound Vib., 285, 457-466. https://doi.org/10.1016/j.jsv.2004.09.020
  19. Wu, J.J. (2006), "Free vibration characteristics of a rectangular plate carrying multiple three-degree-of-freedom spring-mass systems using the equivalent mass method", Int. J. Solids Struct., 43, 727-746. https://doi.org/10.1016/j.ijsolstr.2005.03.061
  20. Wu, J.J. (2005), "Use of equivalent spring method for free vibration analyses of a rectangular plate carrying multiple three-degree-of-freedom spring-mass systems", Struct. Eng. Mech., 21, 713-736. https://doi.org/10.12989/sem.2005.21.6.713
  21. Wu, J.J. (2003), "Use of effective stiffness matrix for the free vibration analyses of a non-uniform cantilever beam carrying multiple two degree-of-freedom spring?damper?mass systems", Comput. Struct., 81, 2319-2330. https://doi.org/10.1016/S0045-7949(03)00315-8
  22. Wu, J.J. (2002), "Alternative approach for the free vibration of beams carrying a number of two-degree of freedom spring-mass systems', J. Struct. Eng., 128(12), 1604-1616. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:12(1604)
  23. Wu, J.J. and Whittaker, A.R. (1999), "The natural frequencies and mode shapes of a uniform cantilever beam with multiple two-dof spring-mass systems", J. Sound Vib., 227, 361-381. https://doi.org/10.1006/jsvi.1999.2324

피인용 문헌

  1. Fundamental frequency of a corner-supported rectangular sandwich plate with the central lumped mass vol.23, pp.8, 2011, https://doi.org/10.1177/1099636220974995