Structural Engineering and Mechanics

  • 제40권1호
  • /
  • Pages.65-84
  • /
  • 2011
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A simple mathematical model for static analysis of tall buildings with two outrigger-belt truss systems

  • Rahgozar, Reza (Department of Civil Engineering, Shahid Bahonar University of Kerman) ;
  • Ahmadi, Ali Reza (Department of Civil and Mechanical Engineering, International Center for Science and High Technology) ;
  • Hosseini, Omid (Department of Civil Engineering, Shahid Bahonar University of Kerman) ;
  • Malekinejad, Mohsen (Department of Civil Engineering, Shahid Bahonar University of Kerman)
  • 투고 : 2010.06.22
  • 심사 : 2011.06.24
  • 발행 : 2011.10.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper a simple mathematical model for approximate static analysis of combined system of framed tube, shear core and two outrigger-belt truss structures subjected to lateral loads is presented. In the proposed methodology, framed tube is modeled as a cantilevered beam with a box section and interaction between shear core and outrigger-belt truss system with framed tube is modeled using torsional springs placed at location of outrigger-belt truss; these torsional springs act in a direction opposite to rotation generated by lateral loads. The effect of shear lag on axial deformation in flange is quadratic and in web it is a cubic function of geometry. Here the total energy of the combined system is minimized with respect to lateral deflection and rotation in plane section. Solution of the resulting equilibrium equations yields the unknown coefficients of shear lag along with the stress and displacement distributions. The results of a numerical example, 50 storey building subjected to three different types of lateral loading obtained from SAP2000 are compared to those of the proposed method and the differences are found to be reasonable. The proposed method can be used during the preliminary design stages of a tall building and can provide a better understanding of the effects of various parameters on the overall structural behavior.

키워드

참고문헌

  1. Chang, S.T. and Zheng, F.Z. (1987), "Negative shear lag in cantilever box girders with constant depth", J. Struct. Eng.-ASCE, 113(1), 20-35. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:1(20)
  2. Connor, J.J. and Pouangare, C.C. (1991), "Simple model for design of framed tube structures", J. Struct. Eng.- ASCE, 117, 3623-3644. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:12(3623)
  3. Coull, A. and Ahmed, K. (1978), "Deflection of framed-tube structures", J. Struct. Div., 104, 857-862.
  4. Coull, A. and Bose, B. (1975), "Simplified analysis of frame tube structures", J. Struct. Div., 101, 2223-2240.
  5. Coull, A. and Bose, B. (1976), "Torsion of frame-tube structures", J. Struct. Div.-ASCE, 102(12), 2366-2370.
  6. Coull, A. and Bose, B. (1977), "Discussion of simplified analysis of frame-tube structures", J. Struct. Div.-ASCE, 103(1), 297-299.
  7. Coull, A. and Subedi, N. (1971), "Framed-tube structures for high rise buildings", J. Struct. Div., 97, 2097-2105.
  8. Ding, J.M. (1991), "Optimum belt truss location for high-rise structures and top level drift coefficient", J. Build. Struct., 4, 10-13.
  9. Foutch, D.A. and Chang, P.C. (1982), "A shear lag anomaly", J. Struct. Eng.-ASCE, 108(7), 1653-1658.
  10. Fu, X.Y. (1999), "Design proposal for reinforced concrete high-rise building structure with outrigger belts", J. Build. Struct., 10, 11-19.
  11. Gao, P. (1998), "Structural behavior of ultra high-rise building with outrigger belts", J. Build. Struct., 10, 8-12.
  12. Gerasimidis, S., Efthymiou, E. and Baniotopoulos, C.C. (2009), "Optimum outrigger locations of high-rise steel buildings for wind loading", EACWE 5, Florence, Italy.
  13. Gunel, H.M. and Ilgin, E.H. (2007), "A proposal for the classification of structural systems of tall buildings", J. Build. Environ., 42, 2667-2675. https://doi.org/10.1016/j.buildenv.2006.07.007
  14. Ha, A.H., Fazio, P. and Moselhi, O. (1978), "Orthotropic membrane for tall building analysis", J. Struct. Div.- ASCE, 104(9), 1495-1505.
  15. Hoenderkamp, J.C.D and Bakker, M.C.M. (2003), "Analysis of high-rise braced frames with outriggers", J. Struct. Des. Tall Spec. Build., 12, 335-350. https://doi.org/10.1002/tal.226
  16. Kwan, A.K.H. (1994), "Simple method for approximate analysis of framed-tube structures", J. Struct. Eng.- ASCE, 120, 1221-1239. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:4(1221)
  17. Kwan, A.K.H. (1996), "Shear lag in shear core walls", J. Struct. Eng.-ASCE, 122, 1097-1104. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:9(1097)
  18. Lam, N., Wilson, J. and Lumantarna, E. (2010), "Modeling of seismically induced storey-drift in buildings", Struct. Eng. Mech., 35(4), 459-478. https://doi.org/10.12989/sem.2010.35.4.459
  19. Lee J., Bang, M. and Kim, J.Y. (2008), "An analytical model for high-rise wall-frame structures with outriggers", J. Struct. Des. Tall Spec. Build., 17, 839-851. https://doi.org/10.1002/tal.406
  20. Malekinejad, M. and Rahgozar, R. (2011), "Free vibration analysis of tall buildings with outrigger-belt truss system", J. Earthq. Struct., 2(1), 89-107. https://doi.org/10.12989/eas.2011.2.1.089
  21. McNabb, J.W. and Muvdi, B.B. (1975), "Drift reduction factors for belt high-rise structures", Eng. J., 3rd Quarter, 88-91.
  22. Rahgozar, R. and Sharifi, Y. (2009), "An approximate analysis of combined system of framed tube, shear core and belt truss in high-rise buildings", J. Struct. Des. Tall Spec. Build., 18(6), 607-624. https://doi.org/10.1002/tal.503
  23. Rahgozar, R., Ahmadi, A. and Sharifi, Y. (2010), "A simple mathematical model for approximate analysis of tall buildings", J. Appl. Math. Model., 34, 2437-2451. https://doi.org/10.1016/j.apm.2009.11.009
  24. Saffari, H., Rahgozar, R. and Mahjoob, R. (2003), "Simple method for analysis of tube frame", Sixth International Conference on Civil Engineering, Isfahan University of Technology, Isfahan, Iran, 198-204.
  25. SAP2000 Advanced 12.0.0, Computers and Structures, Berkeley, California, USA.
  26. Shushkewich, K.W. (1991), "Negative shear lag explained", J. Struct. Eng.-ASCE, 117(11), 3543-3545. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:11(3543)
  27. Singh, Y. and Nagpal, A.K. (1993), "Secondary web-flange interaction in framed tube buildings", J. Struct. Des. Tall Spec. Build., 2, 325-331. https://doi.org/10.1002/tal.4320020405
  28. Smith, S. and Coull, A. (1996), Tall Building Structures, McGraw Hill Book Company, New York.
  29. Smith, S.B. and Salim, I. (1981), "Parameter study of outrigger braced tall building structures", J. Struct. Eng., 107(10), 2001-2014.
  30. Takabatake, H., Mukai, H. and Hirano, T. (1993), "Doubly symmetric tube structures, I: static analysis", J. Struct. Eng.-ASCE, 119(7), 1981-2001. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:7(1981)
  31. Takewaki, I. and Tsujimoto, H. (2011), "Scaling of design earthquake ground motions for tall buildings based on drift and input energy demands", Earthq. Struct., 2(2), 171-187. https://doi.org/10.12989/eas.2011.2.2.171
  32. Taranath, B.S. (1975), "Optimum belt truss location for high-rise structures", Struct. Eng., 53(8), 18-21.
  33. Taranath, B.S. (1988), Structural Analysis and Design of Tall Buildings, McGraw Hill Book Company, New York.
  34. Zhang, Z.G., Fu, X.Y., Wang, J.J. and Wei, Y.N. (1996), "Studies on structural performance of ultra high-rise building with outrigger belts", J. Build. Struct., 17(4), 2-9.

피인용 문헌

  1. Free vibration analysis of combined system with variable cross section in tall buildings vol.42, pp.5, 2012, https://doi.org/10.12989/sem.2012.42.5.715
  2. Finite element generalized tooth contact analysis of double circular arc helical gears vol.43, pp.4, 2012, https://doi.org/10.12989/sem.2012.43.4.439
  3. Comparison of shear lag in structural steel building with framed tube and braced tube vol.49, pp.3, 2014, https://doi.org/10.12989/sem.2014.49.3.297
  4. Weight and topology optimization of outrigger-braced tall steel structures subjected to the wind loading using GA vol.20, pp.4, 2015, https://doi.org/10.12989/was.2015.20.4.489
  5. Genetic-algorithm-based minimum weight design of an outrigger system for high-rise buildings vol.117, 2016, https://doi.org/10.1016/j.engstruct.2016.02.027
  6. Optimal stiffness distribution in preliminary design of tubed-system tall buildings vol.65, pp.6, 2018, https://doi.org/10.12989/sem.2018.65.6.731