DOI QR코드

DOI QR Code

Structural damage identification of plates based on modal data using 2D discrete wavelet transform

  • Bagheri, A. (Department of Civil and Environmental Engineering, University of Pittsburgh) ;
  • Ghodrati Amiri, G. (Center of Excellence for Fundamental Studies in Structural Engineering, School of Civil Engineering, Iran University of Science & Technology) ;
  • Khorasani, M. (Center of Excellence for Fundamental Studies in Structural Engineering, School of Civil Engineering, Iran University of Science & Technology) ;
  • Bakhshi, H. (Center of Excellence for Fundamental Studies in Structural Engineering, School of Civil Engineering, Iran University of Science & Technology)
  • 투고 : 2010.01.27
  • 심사 : 2011.06.24
  • 발행 : 2011.10.10

초록

An effective method for detection linear flaws in plate structures via two-dimensional discrete wavelet transform is proposed in this study. The proposed method was applied to a four-fixed supported rectangular plate containing damage with arbitrary length, depth and location. Numerical results identifying the damage location are compared with the actual results to demonstrate the effectiveness of the proposed method. Also, a wavelet-based method presented for de-noising of mode shape of plate. Finally, the performance of the proposed method for de-noising and damage identification was verified using experimental data. Comparison between the location detected by the proposed method, and the plate's actual damage location revealed that the methodology can be used as an accessible and effective technique for damage identification of actual plate structures.

키워드

참고문헌

  1. Bayissa, W.L. and Haritos, N. (2007), "Structural damage identification in plates using spectral strain energy analysis", J. Sound Vib., 307, 226-249. https://doi.org/10.1016/j.jsv.2007.06.062
  2. Bayissa, W.L., Haritos, N. and Thelandersson, S. (2008), "Vibration-based structural damage identification using wavelet transform", Mech. Syst. Signal Pr., 22, 1194-1215. https://doi.org/10.1016/j.ymssp.2007.11.001
  3. Bagheri, A., Ghodrati Amiri, G. and Seyed Razzaghi, S.A. (2009), "Vibration-based damage identification of plate structures via curvelet transform", J. Sound Vib., 327, 593-603. https://doi.org/10.1016/j.jsv.2009.06.019
  4. Chang, C.C. and Chen, L.W. (2004), "Damage detection of a rectangular plate by spatial wavelet based approach", Appl. Acoust., 65, 819-832. https://doi.org/10.1016/j.apacoust.2004.01.004
  5. Cornwell, P., Doebling, S.W. and Farrar, C.R. (1999), "Application of the strain energy damage detection method to plate-like structures", J. Sound Vib., 224, 359-374. https://doi.org/10.1006/jsvi.1999.2163
  6. Daubechies, I. (1992), "Ten lectures on wavelets", CBMS-NSF Conference Series in Applied Mathematics, Montpelier, Vermont.
  7. Doebling, S.W., Farrar, C.R., Prime, M.B. and Shevitz, D.W. (1996), "Damage identification and health monitoring of structural and mechanical systems from change in their vibration characteristics: a literature review", Las Alamos National Laboratory Report LA-13070-MS, Las Alamos, New Mexico.
  8. Fan, W. and Qiao, P. (2009), "A 2-D continuous wavelet transform of mode shape data for damage detection of plate structures", Int. J. Solids Struct., 46, 4379-4395. https://doi.org/10.1016/j.ijsolstr.2009.08.022
  9. Ghodrati Amiri, G., Bagheri, A., Seyed Razaghi, S.A. and Asadi, A. (2009), "Structural damage detection in plates using wavelet transform", Proceedings of the Fifth International Structural Engineering and Construction Conference (ISCE5), Les Vegas, NV, USA.
  10. Gokdag, H. (2008), "Application of continuous wavelet transform to detect damage in thin-walled beams coupled in bending and torsion", Struct. Eng. Mech., 29(3), 351-354. https://doi.org/10.12989/sem.2008.29.3.351
  11. Gokdag, H. and Kopmaz, O. (2010), "A new structural damage detection index based on analyzing vibration modes by the wavelet transform", Struct. Eng. Mech., 35(2), 257-260. https://doi.org/10.12989/sem.2010.35.2.257
  12. Han, J., Ren, W. and Sun, Z. (2005), "Wavelet packet based damage identification of beam structures", Int. J. Solids Struct., 42, 6610-6627. https://doi.org/10.1016/j.ijsolstr.2005.04.031
  13. Hadjileontiadis, L.J. and Douka, E. (2007a), "Kurtosis analysis for crack detection in thin isotropic rectangular plates", Eng. Struct., 29, 2353-2364. https://doi.org/10.1016/j.engstruct.2006.12.006
  14. Hadjileontiadis, L.J. and Douka, E. (2007b), "Crack detection in plates using fractal dimension", Eng. Struct., 29, 1612-1625. https://doi.org/10.1016/j.engstruct.2006.09.016
  15. Huang, Y., Meyer, D. and Nemat-Nasser, S. (2009), "Damage detection with spatially distributed 2D Continuous Wavelet Transform", Mech. Mater., 41, 1096-1107. https://doi.org/10.1016/j.mechmat.2009.05.006
  16. Kim, B.H., Kim, H. and Park, T. (2006), "Nondestructive damage evaluation of plates using the multi-resolution analysis of two-dimensional Haar wavelet", J. Sound Vib., 292, 82-104. https://doi.org/10.1016/j.jsv.2005.07.035
  17. Lakshmanan, N., Raghuprasad, B.K., Muthumani, K., Gopalakrishnan, N. and Basu, D. (2007), "Wavelet analysis and enhanced damage indicators", Smart Struct. Syst., 3(1), 23-49. https://doi.org/10.12989/sss.2007.3.1.023
  18. Loutridis, S., Douka, E., Hadjileontiadis, L.J. and Trochidis, A. (2005), "A two-dimensional wavelet transform for detection of cracks in plates", Eng. Struct., 27, 1327-1338. https://doi.org/10.1016/j.engstruct.2005.03.006
  19. Mallat, S. (2001), A Wavelet Tour on Signal Processing, Academic Press, NewYork.
  20. Ovanesova, A.V. and Suarez, L.E. (2004), "Application of wavelet transform to damage detection in frame structures", Eng. Struct., 26, 39-49. https://doi.org/10.1016/j.engstruct.2003.08.009
  21. Poudel, U.P., Fu, G. and Ye, J. (2007), "Wavelet transformation of mode shape difference function for structural damage location identification", Earthq. Eng. Struct. D., 36, 1089-1107. https://doi.org/10.1002/eqe.673
  22. Rucka, M. and Wilde, K. (2006), "Application of continuous wavelet transform in vibration based damage detection method for beams and plates", J. Sound Vib., 297, 536-550. https://doi.org/10.1016/j.jsv.2006.04.015
  23. Sun, Z. and Chang, C.C. (2004), "Statistical Wavelet-Based Method for Structural Health Monitoring", J. Struct. Eng.-ASCE, 130(7), 1055-1062. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:7(1055)
  24. Wang, L. and Yuan, F.G. (2007), "Active damage localization technique based on energy propagation of Lamb waves", Smart Struct. Syst., 3(2), 201-217. https://doi.org/10.12989/sss.2007.3.2.201
  25. Yam, Y.J. and Yam, L.H. (2002), "Online detection of crack damage in composite plates using embedded piezoelectric actuators/sensors and wavelet analysis", Compos. Struct., 58, 29-38. https://doi.org/10.1016/S0263-8223(02)00043-0

피인용 문헌

  1. Application of Extreme Learning Machine to Damage Detection of Plate-Like Structures vol.17, pp.07, 2017, https://doi.org/10.1142/S0219455417500687
  2. A flexibility-based method via the iterated improved reduction system and the cuckoo optimization algorithm for damage quantification with limited sensors vol.23, pp.4, 2014, https://doi.org/10.1088/0964-1726/23/4/045019
  3. Model-based identification of damage from sparse sensor measurements using Neumann series expansion vol.25, pp.2, 2017, https://doi.org/10.1080/17415977.2016.1160393
  4. Damage prognosis by means of modal residual force and static deflections obtained by modal flexibility based on the diagonalization method vol.22, pp.7, 2013, https://doi.org/10.1088/0964-1726/22/7/075032
  5. Optimization-based method for structural damage localization and quantification by means of static displacements computed by flexibility matrix vol.48, pp.4, 2016, https://doi.org/10.1080/0305215X.2015.1017476
  6. Signal processing based damage detection of concrete bridge piers subjected to consequent excitations vol.19, pp.3, 2017, https://doi.org/10.21595/jve.2015.16474
  7. Vibration analysis for slab track at different train speeds using Bayes wavelet denoising vol.231, pp.8, 2017, https://doi.org/10.1177/0954409716647417
  8. Bridge Damage Identification from Moving Load Induced Deflection Based on Wavelet Transform and Lipschitz Exponent vol.16, pp.05, 2016, https://doi.org/10.1142/S0219455415500030
  9. Plate-like structures damage detection based on static response and static strain energy using gaussian process regression (GPR) 2017, https://doi.org/10.1080/17415977.2017.1386188
  10. Statistical damage classification method based on wavelet packet analysis vol.46, pp.4, 2013, https://doi.org/10.12989/sem.2013.46.4.459
  11. Structural damage detection using sparse sensors installation by optimization procedure based on the modal flexibility matrix vol.381, 2016, https://doi.org/10.1016/j.jsv.2016.06.037
  12. Comparisons of wavelets and contourlets for vibration-based damage identification in the plate structures pp.2048-4011, 2019, https://doi.org/10.1177/1369433218824903
  13. Optimal sensor distance for damage detection considering wavelet sensitivity and uncertainties vol.513, pp.None, 2019, https://doi.org/10.1088/1757-899x/513/1/012018
  14. Damage Detection in One- and Two-Dimensional Structures using Residual Error Method vol.462, pp.None, 2011, https://doi.org/10.1016/j.jsv.2019.114908
  15. Multi-constrained optimization combining ARMAX with differential search for damage assessment vol.72, pp.6, 2011, https://doi.org/10.12989/sem.2019.72.6.689
  16. Performance of Damage Identification Based on Directional Wavelet Transforms and Entopic Weights Using Experimental Shearographic Testing Results vol.21, pp.3, 2011, https://doi.org/10.3390/s21030714
  17. Damage detection on rectangular laminated composite plates using wavelet based convolutional neural network technique vol.278, pp.None, 2021, https://doi.org/10.1016/j.compstruct.2021.114656
  18. A directional continuous wavelet transform of mode shape for line-type damage detection in plate-type structures vol.167, pp.no.pa, 2022, https://doi.org/10.1016/j.ymssp.2021.108510