DOI QR코드

DOI QR Code

Dynamic analysis of structures in frequency domain by a new set of Ritz vectors

  • Aliasghar Arjmandi, S. (Civil Engineering Department Amirkabir University of Technology) ;
  • Lotfi, Vahid (Civil Engineering Department Amirkabir University of Technology)
  • Received : 2010.05.03
  • Accepted : 2011.06.22
  • Published : 2011.09.10

Abstract

The accurate dynamic analysis of structures is usually performed by a fine finite element discretization with very large number of degrees of freedom. Apart from modal analysis, one can reduce the number of final equations by assuming the deformed shape of the structure as a linear combination of independent Ritz vectors. The efficiency of this method relies heavily on the vectors selected. In this paper, a new set of Ritz vectors is proposed. It is primarily proved that these vectors are linearly independent. Subsequently, various two and three-dimensional examples are analyzed based on the proposed method. In each case, the results are compared with the ones obtained based on usual Ritz and modal analysis methods. It is finally concluded that the proposed method is very effective and efficient method for dynamic analysis of structures in frequency domain.

Keywords

References

  1. Arnold, R.R. and Citerley, R.L. (1985), "Application of Ritz vectors for dynamic analysis of large structures", Comput. Struct., 21, 901-907. https://doi.org/10.1016/0045-7949(85)90201-9
  2. Bayo, E.P. and Wilson, E.L. (1984), "Use of Ritz vectors in wave propagation and foundation response", Earthq. Eng. Struct. D., 12, 499-505. https://doi.org/10.1002/eqe.4290120406
  3. Gu, J., Ma, Z.D. and Hulbert, G.M. (2000), "A new load-dependent Ritz vector method for structural dynamics analyses: quasi-static Ritz vectors", Finite Elem. Anal. Des., 36, 261-278. https://doi.org/10.1016/S0168-874X(00)00036-6
  4. Hall, J.F. and Chopra, A.K. (1983), "Dynamic analysis of arch dams including hydrodynamic effects", J. Eng. Mech. Div.-ASCE, 109, 149-167. https://doi.org/10.1061/(ASCE)0733-9399(1983)109:1(149)
  5. Ibrahimbegovic, A. and Wilson, E.L. (1990), "Automated truncation of Ritz vectors basis in modal transformation", J. Eng. Mech.-ASCE, 116, 2506-2520. https://doi.org/10.1061/(ASCE)0733-9399(1990)116:11(2506)
  6. Jeong, K.H. (2006). "Mode localization and veering of natural frequency loci in two circular plates coupled with a fluid", Struct. Eng. Mech., 22(6), 719-739. https://doi.org/10.12989/sem.2006.22.6.719
  7. Joo, K.J. and Wilson, E.L. (1987), "Generation of Ritz vectors for adaptive finite element dynamic analysis", Proceedings of the U.S.-Korea Seminar Critical Engineering and Systems, Seoul, Korea.
  8. Joo, K.J., Wilson, E.L. and Leger, P. (1989), "Ritz vectors and generation criteria for mode superposition analysis", Earthq. Eng. Struct. D., 18, 149-167. https://doi.org/10.1002/eqe.4290180203
  9. Kim, B.W., Jung, H.J., Kim, W.H. and Lee, I.W. (2003), "Dynamic analysis of structures using modified Lanczos co-ordinates", Earthq. Eng. Struct. D., 32, 1469-1474. https://doi.org/10.1002/eqe.284
  10. Leger, P., Wilson, E.L. and Clough, R.W. (1986), The Use of Load Dependent Vectors for Dynamic and Earthquake Analysis, UCB/EERC 86-04, University of Californaia, Earthquake Engineering Research Center, Berkeley.
  11. Lotfi, V. (2005), "Frequency domain analysis of concrete arch dams by decoupled modal approach", Struct. Eng. Mech., 21(4), 423-435. https://doi.org/10.12989/sem.2005.21.4.423
  12. Lotfi, V. (2007), "Direct frequency domain analysis of concrete arch dams based on FE-BE procedure", Struct. Eng. Mech., 26(4), 363-376. https://doi.org/10.12989/sem.2007.26.4.363
  13. Nour-Omid, B. and Clough, R.W. (1985), "Block Lanczos method for dynamic analysis of structures", Earthq. Eng. Struct. D., 13, 271-275. https://doi.org/10.1002/eqe.4290130210
  14. Nour-Omid, B. and Clough, R.W. (1984), "Dynamic analysis of structures using Lanczos co-ordinates", Earthq. Eng. Struct. D., 12, 565-577. https://doi.org/10.1002/eqe.4290120410
  15. Prasolov, V.V. and Ivanov, S. (1994), Problems and Theorems in Linear Algebra, American Mathematical Society.
  16. Rose, T.L. (2006), "Using load-based Ritz vectors for dynamic analysis of structures", Proceedings of the 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Newport, RI, USA.
  17. Rossit, C.A. and Ciancio, P.M. (2008), "Free vibrations of anisotropic rectangular plates with holes and attached masses", Struct. Eng. Mech., 28(1), 53-67. https://doi.org/10.12989/sem.2008.28.1.053
  18. Spiess, H. and Wriggers, P. (2005), "Reduction methods for FE analysis in nonlinear structural dynamics", PAMM, Proc. Appl. Math. Mech., 5, 135-136. https://doi.org/10.1002/pamm.200510048
  19. Wilson, E.L. (2000), Three Dimensional Static and Dynamic Analysis of Structures, Computers and Structures, Inc., Berkeley.
  20. Wilson, E.L. and Bayo, E.P. (1986), "Use of special Ritz vectors in dynamic substructure analysis", J. Struct. Eng.-ASCE, 112, 1944-1954. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:8(1944)
  21. Wilson, E.L., Yuan, M.W. and Dickens, J.M. (1982), "Dynamic analysis by direct superposition of Ritz vectors", Earthq. Eng. Struct. D., 10, 813-821. https://doi.org/10.1002/eqe.4290100606
  22. Xia, H. and Humar, J.L. (1992), "Frequency dependent Ritz vectors", Earthq. Eng. Struct. D., 21, 215-231. https://doi.org/10.1002/eqe.4290210303